Konica Minolta bizhub C20P User Manual

Configuration Menu Overview 37 PAPER MENU
With this menu, the paper used for printing can be managed.
PAPER TYPE
DEFAULT TRAY
TRAY 1PAPER SIZE
CUSTOM SIZE*
TRAY 2
PAPER TYPE
PAPER SIZE
TRAY 3***
PAPER SOURCE
COLLATE****
DUPLEX
COPIES
PAPER TYPE
PAPER SIZE
PAPER MENU
TRAY CHAINING
TRAY MAPPING
LOGICAL TRAY
0
TRAY MAPPING
MODE
LOGICAL TRAY
9
CUSTOM SIZE**
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 38
* This menu item appears only when you select CUSTOM from the 
TRAY 1/PAPER SIZE menu.
**This menu item appears only when you select 
CUSTOM from the 
TRAY 2/PAPER SIZE menu.
*** This menu item appear only if the optional lower feeder unit is 
installed.
**** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card of 1 GB or more is installed.
All factory default values are shown in bold.
PAPER 
SOURCEDEFAULT 
TRAYSettingsTRAY1/TRAY2/TRAY3
Select...

Configuration Menu Overview 39
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 1.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to...

Configuration Menu Overview 40
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the setting for the type of paper 
loaded into Tray 1.
TRAY 2 PAPER 
SIZESettingsANY/LETTER/EXECUTIVE/
A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/UK 
QUARTO/16K/PHOTO 4×6/
KAI 16/KAI 32/CUSTOM
Select the setting for the size of paper 
loaded into Tray 2.
The default setting for North 
America is 
LETTER. The default 
setting for...

Configuration Menu Overview 41
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 2.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 92 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.63 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.26 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to...

Configuration Menu Overview 42
TRAY 3 PAPER 
SIZEThe size of paper loaded in Tray 3 is 
indicated.
This menu item only shows the current 
setting. This setting cannot be changed.
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper 
loaded into Tray 3.
TRAY 
CHAININGSettingsON/OFF
If ON is selected and the specified tray runs out of 
paper during printing, a tray loaded with paper of the 
same size is automatically selected so printing can 
continue.
If 
OFF is selected...

Configuration Menu Overview 43
DUPLEXSettingsOFF/LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides 
of the paper for long-edge binding.
If 
SHORT EDGE is selected, the pages will be printed on both 
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu 
setting.
COPIESSettings1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu 
setting....

Configuration Menu Overview 44
QUALITY MENU
With this menu, settings for the print quality can be specified.
TEXT PRINTING
COLOR MODE
BRIGHTNESS
HALFTONE
QUALITY MENU
IMAGE PRINTING
GRAPHICS 
PRINTING
IMAGE PRINTING
PCL SETTINGCONTRAST
TEXT PRINTING
EDGE 
ENHANCEMENTIMAGE PRINTING
GRAPHICS 
PRINTING
EDGE STRENGTH
ECONOMY PRINT
RGB SOURCE
RGB INTENT
RGB GRAY
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 45
TEXT PRINTINGRGB SOURCE
RGB INTENT
RGB GRAY
PS SETTINGIMAGE PRINTINGRGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION 
PROF
GRAPHICS 
PRINTINGRGB SOURCE
RGB INTENT
RGB GRAY
TEXT PRINTINGRGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION 
PROF
GRAPHICS 
PRINTINGRGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION 
PROF
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 46
All factory default values are shown in bold.
COLOR 
MODESettingsCOLOR/GRAYSCALE
If COLOR is selected, the pages are printed in full color.
If 
GRAYSCALE is selected, the pages are printed in black 
and white.
BRIGHT-
NESSSettings-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be adjusted.
HALFTONE IMAGE 
PRINTINGSettingsLINE ART/DETAIL/
SMOOTH
Select how halftones in images are 
reproduced.
If 
LINE ART is selected, halftones are 
reproduced with...