Konica Minolta bizhub 600 User Manual
Here you can view all the pages of manual Konica Minolta bizhub 600 User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 51
2Before Making Copies 2-2 bizhub 750/600 Before Making Copies Chapter 2 2 Before Making Copies 2.1 Part Names and Their Functions Outside of Machine 12 3 5 6 7 8 9 13 104 11 12 14 Downloaded From ManualsPrinter.com Manuals
Page 52
Before Making Copies2 bizhub 750/600 2-3 Before Making Copies Chapter 2 2 Note The maximum angle that the ADF is opened can be adjusted in two stag- es. For details, contact your technical representative. No.Part NameDescription 1 ADF (automatic document feeder) Automatically feeds one original sheet at a time for scanning. If the double-sided original setting is se- lected in the touch panel, the original is automatical- ly turned over so that both sides can be scanned. Referred to as the “ADF”...
Page 53
2Before Making Copies 2-4 bizhub 750/600 Before Making Copies Chapter 2 15 1617 No.Part NameDescription 15 Power cord Supplies power to the machine 16 Serial port (RS-232C) Used for transmissions with CS Remote Care 17 Network connector (10Base-T/ 100Base-TX)Used for connecting the network cable when this machine is used for network printing and network scanning Downloaded From ManualsPrinter.com Manuals
Page 54
Before Making Copies2 bizhub 750/600 2-5 Before Making Copies Chapter 2 Inside of Machine 2 Reminder Parts in the fusing unit are extremely hot. Touching any part in this unit may result in burns. 1 2 3 4 5 6 78 No.Part NameDescription 1 Toner cartridge When the toner is empty, replace the cartridge. 2 Toner-cartridge-securing lever Pull toward you to remove the toner unit when re- placing the toner cartridge. 3 ADU unit Pull out when clearing paper misfeeds. For details on the levers and buttons of...
Page 55
2Before Making Copies 2-6 bizhub 750/600 Before Making Copies Chapter 2 Options 1 2 3 4 5 67 8 9 11 1012 13 14 15 Downloaded From ManualsPrinter.com Manuals
Page 56
Before Making Copies2 bizhub 750/600 2-7 Before Making Copies Chapter 2 No.Part NameDescription 1 Main body The original is scanned by the scanner section, and the scanned image is printed by the printer section. Referred to as the “machine”, the “main unit”, or the “750/600” throughout the manual. 2 Shift tray SF-601 Separates copies fed out at an offset 3 Post inserter PI-501 Allows cover sheets to be inserted into copies if in- stalled onto finisher FS-504/FS-505/FS-602, and al- lows the functions...
Page 57
2Before Making Copies 2-8 bizhub 750/600 Before Making Copies Chapter 2 Large Capacity Unit LU-401/LU-402 11 22 3 3 4 4 6 6 7 75 5 LCU LU-401 LCU LU-402 No.Part NameDescription 1 Upper door of the paper feed cab- inetOpened when loading paper or clearing a paper misfeed 2 Left-side door of the paper feed cabinetOpened when clearing paper misfeeds 3 LCU lever Lowered when clearing paper misfeeds 4 Paper guides Positions the sides of the paper to be loaded. 5 Bottom-plate-lowering button Pressed to...
Page 58
Before Making Copies2 bizhub 750/600 2-9 Before Making Copies Chapter 2 Finisher FS-504/FS-505/FS-602 (+ Punch Kit PK-505) 1 4 31 4 3 2 Finisher FS-602 No.Part NameDescription 1 Finisher door Opened when clearing paper misfeeds or staple jams or when replacing the staple cartridge, or when emptying the punch dust box if punch kit PK- 505 is installed 2 BM tray Collects pages printed with the “Half Fold”, “Fold & Staple”, or “Tri-Fold” settings or with the “Cover Mode” function 3 Main tray Collects...
Page 59
2Before Making Copies 2-10 bizhub 750/600 Before Making Copies Chapter 2 4 34 3 1 1 59 2 5 8 7 62 10 10 11 11 Finisher FS-602Finisher FS-504 +Punch Kit PK-505 Finisher FS-505 +Punch Kit PK-505 4 3 1 9 2 5 82 10 11 Downloaded From ManualsPrinter.com Manuals
Page 60
Before Making Copies2 bizhub 750/600 2-11 Before Making Copies Chapter 2 No.Part NameDescription 1 Inlet lever Lowered when clearing paper misfeeds 2 Punch kit (optional) Punches holes for filing printed pages when the punch kit is installed onto finisher 3 Cover sheet conveyance lever Moved to the left when clearing paper misfeeds 4 Sub tray conveyance lever Moved to the right when clearing paper misfeeds 5 Stacker conveyance lever Moved down and to the left when clearing paper misfeeds 6 Lower lever...