Konica Minolta bizhub 600 User Manual

1Installation and Operation Precautions
1-10 bizhub 750/600
Installation and Operation Precautions
Chapter 1
For Users in countries not subject to Class B regulations
WARNING
This is a Class A product. In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequate 
measures.
This device must be used with a shielded network (10 Base-T/100 Base-TX) 
cable and a shielded parallel cable. The use of non-shielded cables is likely 
to result in...

Installation and Operation Precautions1
bizhub 750/600 1-11
Installation and Operation Precautions
Chapter 1
For Finland, Sweden Users
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
VAROITUS!
Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla 
saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle la-
sersäteilylle.
Tämä on puolijohdelaser. Laserdiodin suurin teho on 15 mW ja aallonpituus 
on 770 - 800 nm.
VARNING!
Om apparaten används på annat sätt än I denna...

1Installation and Operation Precautions
1-12 bizhub 750/600
Installation and Operation Precautions
Chapter 1
Acoustic noise (For European Users Only)
Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste 
Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.
For EU member states only
This symbol means: Do not dispose of this prod-
uct together with your household waste!
Please refer to the information of your local com-
munity or contact our dealers regrading the prop-
er handling of...

Installation and Operation Precautions1
bizhub 750/600 1-13
Installation and Operation Precautions
Chapter 1
1.3 Caution Notations and Labels
Safety precaution notations and labels appear on this machine at the follow-
ing positions.
Be very careful that an accident does not occur when operations such as re-
moving paper misfeeds are performed.
DO NOT put your hand 
between the main body and 
developing fixing unit; 
otherwise you may be 
injured.
High voltage is present 
around this part. 
Do not touch...

1Installation and Operation Precautions
1-14 bizhub 750/600
Installation and Operation Precautions
Chapter 1
To avoid injury, DO NOT put your hand on 
top of the printed sheets.
Be sure to hold both sides of the printed 
sheets when removing them, and DO NOT 
leave your hand on the printed sheets while 
the primaty (main) tray goes up.
Downloaded From ManualsPrinter.com Manuals 

Installation and Operation Precautions1
bizhub 750/600 1-15
Installation and Operation Precautions
Chapter 1
1.4 Space Requirements
To ensure that machine operation, consumables replenishing, part replace-
ment, and regular maintenance can easily be performed, adhere to the rec-
ommended space requirements detailed below.
bizhub 750/600
bizhub 750/600 + LU-402
Downloaded From ManualsPrinter.com Manuals 

1Installation and Operation Precautions
1-16 bizhub 750/600
Installation and Operation Precautions
Chapter 1
2
Reminder 
Be sure to allow a clearance of 200 mm (7-3/4 in.) or more at the back of 
this machine for the ventilation duct.
bizhub 750/600 + FS-602 + PI-501 + ZU-602
bizhub 750/600 + FS-602 + PI-501 + LU-402
Downloaded From ManualsPrinter.com Manuals 

Installation and Operation Precautions1
bizhub 750/600 1-17
Installation and Operation Precautions
Chapter 1
1.5 Operation Precautions
To ensure the optimum performance of this machine, observe the precau-
tions described below.
Power Source
The power source requirements are as follows.
-Voltage : 120 V AC
-Frequency : 60 Hz
– Use a power source with as little voltage or frequency fluctuations as 
possible.
Operating Environment
The environmental requirements for correct operation of the machine are as...

1Installation and Operation Precautions
1-18 bizhub 750/600
Installation and Operation Precautions
Chapter 1
Downloaded From ManualsPrinter.com Manuals 

2
Before Making Copies
Chapter 2
Before Making Copies
Downloaded From ManualsPrinter.com Manuals