Konica Minolta bizhub 501 User Manual

Fax Driver3-10
Setting up the fax driver (Windows)3
3.2.7 Settings tab
2
Note 
To display the Settings tab, right-click the FAX Driver icon, and then click Properties.
ItemFunction
EMF Spool Select this check box when meta file (EMF) spool is required for use in its own system 
environment.
Display Constraint Message Displays a message when functions that cannot be specified at the same time were 
enabled from the fax driver.
Display paper set in Print 
Server PropertiesUses the paper that was added in...

Fax Driver3-11
Setting up the fax driver (Windows)3
3.3 Specifying the FAX tab settings
Resolution: Specifies the fax resolution. If the resolution is increased, the transmission time may take longer.
Print Recipient File: Prints the document after a fax was sent. When sending a fax, this function can be 
specified when specifying the transmission settings. For details, refer to Specifying the transmission 
settings on page 3-5.
Timer Send: Sets the transmission time. By clicking the [Reflect Current...

Fax Driver3-12
Setting up the fax driver (Windows)3
3.4 Specifying the Basic tab settings
Original Orientation: Specifies the orientation of the original.
Original Size: Specifies the paper size of the original.
Paper Size: Specifies the output paper size of the recipient. Automatically enlarges or reduces when the 
Original Size setting is changed.
Zoom: Specifies the enlargement and reduction ratio.
[Authentication/Account Track]: Specifies the user name and password when performing user...

Fax Driver3-13
Setting up the fax driver (Windows)3
3.4.2 Specifying the user authentication settings
If the user authentication settings have been specified on this machine, you must enter a user name and 
password.
2
Note 
If a fax is sent using a user name or password that is not a registered account on this machine, or if a 
fax is sent without selecting a user under User Authentication, the operation is not authenticated by 
this machine and the job is canceled.
If the user authentication settings...

Fax Driver3-14
Setting up the fax driver (Windows)3
3.4.3 Specifying the account track settings
If the account track settings have been specified on this machine, you must enter a department name and 
password.
2
Note 
If a fax is sent using a department name or password that is not a registered account on this machine, 
or if a fax is sent without Account Track selected, the operation is not authenticated by this machine 
and the job is canceled.
When the account track settings are specified on this...

Fax Driver3-15
Setting up the fax driver (Windows)3
3.5 Specifying the Layout tab settings
Combination: Prints multiple pages on one page, or prints one sheet of an original divided on multiple pages. 
Details can be specified by clicking the [Combination Details] button.
Skip Blank Pages: Does not print blank pages in the data.
3.5.1 Printing multiple pages on one page (N in 1, Poster Mode)
You can specify whether to print multiple pages of text on one page with N in 1 printing, or print one sheet 
of...

Fax Driver3-16
Setting up the fax driver (Windows)3
3.6 Specifying the Stamp/Composition tab settings
3.6.1 Sending with an watermark
Specific text can be sent in the background as an watermark.
2
Note 
For Windows Vista/7/Server 2008 64bit editions, Watermark cannot be selected with any of the 
following functions at the same time.
- [User Authentication]
- [Account Track]
- [Verify Authentication settings before printing]
- [Popup Authentication Dialog when printing]
1Click the Stamp/Composition tab....

Fax Driver3-17
Setting up the fax driver (Windows)3
5Specify settings for the following:
– Watermark Name: Enters the name of the watermark.
– Watermark Text: Enters the text that is to be printed as a watermark.
– [Add]: Click to create a new watermark.
– [Delete]: Click to delete the selected watermark.
– Position: Specifies the vertical and horizontal positions. The watermark position can also be 
specified by using the horizontal and vertical sliders in the dialog box.
– Angle: Specifies the...

Fax Driver3-18
Setting up the fax driver (Windows)3
3.7 Specifying the Configure tab settings
3.7.1 Selecting an option
You can specify whether an option is enabled so that the functions of this machine are available from the fax 
driver.
If the installed options are not set using the Configure tab, the option function cannot be used with the fax 
driver. When installing options, be sure to make the proper settings.
1Open the Printers window or Printers and Faxes window. 
– For Windows 2000/NT 4.0, click...

Fax Driver3-19
Setting up the fax driver (Windows)3
3.7.2 Change Encrypt. Passphrase
When a user has defined an Encrypt. Passphrase for this machine, the same Encrypt. Passphrase as that for 
this machine must be entered.
The Encrypt. Passphrase for the entered characters is automatically created, which is to be used for 
communication with this machine.
!
Detail 
Match the Encrypt. Passphrase to that specified by Driver Password Encryption Setting of this 
machine. For details, refer to the User’s Guide...