Konica Minolta bizhub 500 User Manual

4Specifying Settings Using PageScope Web Connection
4-110 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
Set an Encryption Strength
1In the SSL/TLS page, select “Set an Encryption Strength”, and then 
click the [Next] button.
2Select the encryption strength, and then click the [Apply] button.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-111
Specifying Settings Using PageScope Web Connection
Chapter 4
Remove a Certificate
1In the SSL/TLS page, select “Remove a Certificate”, and then click the 
[Next] button.
2Check the message, and then click the [OK] button.
Downloaded From ManualsPrinter.com Manuals 

4Specifying Settings Using PageScope Web Connection
4-112 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
Set Mode using SSL
Select the mode using SSL.
1In the SSL/TLS page, select “Set Mode using SSL”, and then click the 
[Next] button.
2Select the mode using SSL, and then click the [Apply] button.
Downloaded From ManualsPrinter.com Manuals 

Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-113
Specifying Settings Using PageScope Web Connection
Chapter 4
Processing Mode
When this machine is to be connected to an SSL server as a client, you can 
specify the operation method when the validation of the SSL server certifi-
cate has expired.
2
Note 
The functions that can be specified are described below. 
SMTP over SSL
POP over SSL
LDAP over SSL
To specify the mode using SSL
1On the Network tab, click [SSL/TLS].
2Click...

4Specifying Settings Using PageScope Web Connection
4-114 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
4.32 Authentication
User Authentication/Account Track
The settings that can be specified are described below.
ItemDescription
User Authentication Select “OFF”, “ON (External Server)”, or “ON (MFP)” as the 
user authentication type.
Public User Access If performing user authentication, specify whether to allow 
public users.
External Server Authentication If performing...

Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-115
Specifying Settings Using PageScope Web Connection
Chapter 4
To specify the User Authentication and Account Track settings
1On the Network tab, click [Authentication].
2Enter the required settings.
3Click the [Apply] button.
Downloaded From ManualsPrinter.com Manuals 

4Specifying Settings Using PageScope Web Connection
4-116 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
Auto Logout
Specify auto logout settings for Administrator mode and User mode.
If no operation is performed within the specified time, the administrator or 
user is automatically logged out.
ItemDescription
Admin  Mode  Logout  Time Enter the auto logout time (input range: 1 to 10, 20, 30, 40, 50, 
60 minutes).
User  Mode  Logout  Time Enter the auto logout time (input...

Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-117
Specifying Settings Using PageScope Web Connection
Chapter 4
4.33 OpenAPI
Specify OpenAPI.
2
Reminder 
The setting of [Use SSL/TLS] and [Port No. (SSL/TLS)] is available only 
when the SSL/TLS setting is valid.
ItemDescription
Port No. Enter the port number (input range: 1 to 65535).
Use SSL/TLS Port No. (SSL/
TLS)Specifies whether to use SSL/TLS. To use, select the check 
box, and then type in the port number.
Downloaded From...

4Specifying Settings Using PageScope Web Connection
4-118 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
4.34 TCP Socket Setting
You can specify TCP socket settings.
The settings that can be specified are described below.
2
Reminder 
When changing the TCP socket settings, be sure to turn the power of this 
machine off, then on again.
When turning the main power switch to “OFF”, then to “ON”, wait 10 sec-
onds or more before turning the switch to “ON” again; otherwise, this...

Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-119
Specifying Settings Using PageScope Web Connection
Chapter 4
To specify the TCP Socket Settings
1On the Network tab, click [TCP Socket Setting].
2Enter the required settings.
3Click the [Apply] button.
Downloaded From ManualsPrinter.com Manuals