Konica Minolta bizhub 362 User Manual

8Application functions
8-20 362/282/222
Application functions
Chapter 8
6Touch [Separation] or 
[Book Spread].
– When separating 
page spreads and 
making double-sided 
copies, touch [Page 
Order] to display the 
Page Order screen. 
Touch [Book Order] 
or [Standard], and 
then touch [Enter].
– To cancel the Page 
Order setting, touch 
[OFF].
– If “Page Order” is set to “Book Order”, the left and right pages of 
the spread are copied onto two separate sheets of paper in the 
same page order as the...

Application functions8
362/282/222 8-21
Application functions
Chapter 8
8In the Basics screen, 
touch [Paper], and then 
select the paper tray 
loaded with the paper.
9Specify any other desired copy settings.
10Using the keypad, type in the desired number of copies.
11Press the [Start] key.
Copying begins.
2
Note 
For details on scanning a document with “Page Order” set to “Book Or-
der”, refer to “Scanning a multi-page document from the original glass” 
on page 3-14.
Downloaded From ManualsPrinter.com...

8Application functions
8-22 362/282/222
Application functions
Chapter 8
8.8 Creating booklet copies (“Booklet” function)
Double-sided copies of the document pages are arranged so that the copies 
can be read like a bound book when it is folded in half. Stapling is available 
only if optional finisher is installed.
!
Detail 
Generally, a multiple of 4 document pages is required with a single-sided 
document, and a multiple of 2 document pages is required with a double-
sided document. If there are not...

Application functions8
362/282/222 8-23
Application functions
Chapter 8
To copy using the “Booklet” function
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Touch [Application], and 
then touch [Book Copy/
Repeat].
The Book Copy/Repeat 
screen appears.
3Touch [Booklet].
– To cancel the “Book-
let” function, touch 
[Booklet] again to 
deselect it.
4Specify any other desired copy settings.
5Using the keypad, type in the desired...

8Application functions
8-24 362/282/222
Application functions
Chapter 8
8.9 Printing additional information on copies (Image Set-
tings functions)
A stamp, such as “CONFIDENTIAL” can be added to the center of back-
ground copies, or a distribution number can be added when multiple copies 
are made.
The following Image Settings functions are available.
To print the distribution number (“Set Numbering” function)
0The distribution number is normally printed as a three-digit number. If 
“Starting Number” is...

Application functions8
362/282/222 8-25
Application functions
Chapter 8
2Touch [Application], and 
then touch [Image Set-
tings].
The Image Settings 
screen appears.
3Touch [Set Numbering].
– To cancel the Image 
Settings functions, 
touch [OFF].
– If the optional hard 
disk drive is installed, 
the “Image Overlay” 
function can be 
used. For details, re-
fer to “Printing cop-
ies overlapping a 
different image (“Im-
age Overlay” function)” on page 8-28.
The Set Numbering screen appears.
4Using the...

8Application functions
8-26 362/282/222
Application functions
Chapter 8
5Select the desired settings under “Pages” and “Text Density”.
– If “Pages” is set to “First page only”, the distribution number is only 
printed on the first page of the copy. If “All Pages” is selected, the 
distribution number is printed on all pages.
– Select a setting under “Text Density” to specify the density of the 
printed distribution number.
6Touch [Enter], and then touch [Enter] in the next screen that appears.
7Specify...

Application functions8
362/282/222 8-27
Application functions
Chapter 8
3Touch [Stamp].
– To cancel the Image 
Settings functions, 
touch [OFF].
The Stamp screen ap-
pears.
4Select the desired stamp 
text and the desired set-
ting under “Pages”.
– If “Pages” is set to 
“First page only”, the 
stamp is only printed 
on the first page of 
the copy. If “All Pag-
es” is selected, the 
stamp is printed on 
all pages.
– To cancel the 
“Stamp” function, touch [OFF].
5Touch [Enter], and then touch [Enter] in the...

8Application functions
8-28 362/282/222
Application functions
Chapter 8
8.10 Printing copies overlapping a different image (“Image 
Overlay” function)
Images previously stored on the hard disk can be printed overlapping copies.
To store an overlay image (Store Overlay)
0The “Store Overlay” function is available only if optional hard disk is in-
stalled.
1Position the overlay document to be stored on the hard disk.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8....

Application functions8
362/282/222 8-29
Application functions
Chapter 8
4Touch [Set], and then 
touch the button ([1] 
through [5]) for the 
number where the image 
is to be stored.
– If a button is pressed 
where no image is 
stored, the size of the 
stored image ap-
pears on the button 
to indicate that an 
image has been 
stored.
– To store the image with a number where an image is already stored, 
delete the image, touch [Set], and then touch the button for the 
number.
– To delete the image, touch...