Konica Minolta bizhub 362 User Manual

8Application functions
8-10 362/282/222
Application functions
Chapter 8
8Specify any other desired copy settings.
9Press the [Start] key.
Copying begins.
Downloaded From ManualsPrinter.com Manuals 

Application functions8
362/282/222 8-11
Application functions
Chapter 8
8.4 Adding filing margins to copies (“Page Margin” func-
tion)
Copies can be printed with a filing margin so they can easily be stored in filing 
binders. When making double-sided copies while using the “Page Margin” 
function, the orientation of the copied image can be adjusted for the position 
of the filing margin. In addition, the image orientation can be adjusted without 
creating a filing margin.
To copy using the “Page Margin”...

8Application functions
8-12 362/282/222
Application functions
Chapter 8
3Select the position of the 
filing margin.
– Touch the button for 
a left filing margin or 
for a top filing mar-
gin.
– To cancel the “Page 
Margin” function, 
touch [OFF].
4Touch  and  to specify the width of the filing margin.
?Can only the orientation of the image be adjusted?
%Set the width of the filing margin to 0 to adjust only the orientation 
of the image during double-sided copying.
The margin position can be changed...

Application functions8
362/282/222 8-13
Application functions
Chapter 8
8.5 Erasing unwanted areas of copies (“Edge/Frame 
Erase” function)
Copies can be produced by erasing unwanted areas around the document, 
such as the transmission information on received faxes and the shadows of 
punched holes.
To copy using the “Edge/Frame Erase” function
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Touch [Application], and 
then...

8Application functions
8-14 362/282/222
Application functions
Chapter 8
3Specify the area to be 
erased.
– Touch the button for 
erasing the left side, 
the top, or a sur-
rounding frame.
– To cancel the “Edge/
Frame Erase” func-
tion, touch [OFF].
4Touch   and   to specify the width of the area to be 
erased.
5Touch [Enter].
6Specify any other desired copy settings.
7Using the keypad, type in the desired number of copies.
8Press the [Start] key.
Copying begins.
2
Note 
If the frame is selected, the same...

Application functions8
362/282/222 8-15
Application functions
Chapter 8
8.6 Tiling copy images (“Image Repeat” function)
Multiple copies of the specified scanning area can be printed on a single 
sheet of paper.
To copy using the “Image Repeat” function
1Position the document to be copied.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Load the paper to be used into the desired paper tray.
3Touch [Application], and 
then touch [Book Copy/
Repeat].
The Book...

8Application functions
8-16 362/282/222
Application functions
Chapter 8
4Touch [Image Repeat].
– To cancel a Book 
Copy/Repeat func-
tion, touch [OFF].
5Touch [Auto Detect] or 
[Oversized Paper], de-
pending on the area of 
the document to be 
scanned.
– If “Auto Detect” is 
selected, the area of 
a standard docu-
ment size is 
scanned. Continue 
with step 8.
– If “Oversized Paper” 
is selected, the size can be selected or a non-standard size can be 
entered. The Oversized Paper screen appears.
– To...

Application functions8
362/282/222 8-17
Application functions
Chapter 8
– If “Inch (Fraction)” 
was selected as the 
measurement units, 
touch [X] or [Y] to po-
sition the cursor in 
the input box, and 
then touch   or 
 to specify the 
length.
– A value outside the 
allowable range can-
not be entered.
– To change the en-
tered value, press 
the [C] (clear) key, and then enter the correct value.
– If the “Image Repeat” function is registered with a program, both 
standard sizes and non-standard sizes...

8Application functions
8-18 362/282/222
Application functions
Chapter 8
8.7 Producing separate copies of each page in a page 
spread (“Book Copy” function)
A page spread, such as in an open book or catalog, can be copied with the 
left and right pages on separate pages or both on the same page.
In addition, settings can be specified for the “Page Order” and “Book Erase” 
functions. The following Book Copy settings are available.
SettingDescription
Separation Separate copies of each page in the page...

Application functions8
362/282/222 8-19
Application functions
Chapter 8
To copy using the “Book Copy” function
0Place the document on the original glass.
1Place the book on the original glass.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
2Load the paper to be used into the desired paper tray.
3Touch [Application], and 
then touch [Book Copy/
Repeat].
The Book Copy/Repeat 
screen appears.
4Touch [Book Copy].
– To cancel a Book 
Copy/Repeat func-
tion, touch...