Konica Minolta bizhub 190f User Manual

Layout and installation3
bizhub 131f/190f 3-35
2
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2Turn your machine on.
3The driver software will be installed automatically.
4When the drivers have been installed correctly, the message Your de-
vices are ready to use will appear.
2
Note
After the driver installation, you need to configure the Device Option 
setting to activate either or both the 2nd Paper Cassette or/and Duplex 
Unit (The Duplex...

3Layout and installation
3-36 bizhub 131f/190f
3.6.3 Local install: Windows Parallel port (option)
2
Note
The optional parallel interface is required.
A parallel interface available only for using, Windows 98/98SE, Windows 
Me and Windows NT 4.0 workstation. 
For Windows NT 4.0, you need to log on as an administrator.
If you have previously installed the KONICA MINOLTA 131f/190f GDI 
Printer/Scanner Driver, you can update it by simply clicking a [Update] 
button on the maintenance window.
1Turn on your...

Layout and installation3
bizhub 131f/190f 3-37Activating your device option(s)
If your machine has device options, you must open the printer properties and 
activate them. See page 3-29 for instructions on how to do this.
3.6.4 Uninstalling the driver
Uninstall is required if you are upgrading the software or if your installation 
fails.
2
Note
For Windows NT4.0/2000/XP/Server 2003/Vista, you need to log on as an 
administrator.
For Windows 98/98SE and Windows Me
1Select Start, Settings, Control Panel,...

3Layout and installation
3-38 bizhub 131f/190fFor Windows XP and Windows Server 2003
1Select Start, Control Panel, Add or Remove Programs and the 
Change or Remove Programs icon.
2Select KONICA MINOLTA 131f/190f GDI Printer/Scanner Driver and 
click the [Change/Remove] button.
3Follow the instructions that appear on the window.
For Windows Vista
1Select [Start], [Control Panel], [Programs], [Programs and Features].
2Select KONICA MINOLTA 131f/190f GDI Printer/Scanner Driver and 
click the [Uninstall]...

4Getting started
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Getting started4
bizhub 131f/190f 4-3
4 Getting started
4.1 Operating tips
4.1.1 Switching the machine mode
To switch the machine mode, press the Copy/Fax/Scan button.
The mode light indicates the current mode machine is in.
2
Note
You cannot switch the mode in any of the following cases:
When scanning a document.
During the realtime transmission.
When programming any function settings.
Downloaded From ManualsPrinter.com Manuals 

4Getting started
4-4 bizhub 131f/190f
4.1.2 Entering character
Some settings give you a chance to enter characters; for your TTI (your 
name), remote fax’s name or others. To enter letters or other characters, use 
the following guidelines:
By pressing the numeric key repeatedly, you can access the following char-
acters as shown in the table below.
Character Table
When you want to enter a character that shares the same numeric key, press 
[)] to move the cursor to the right.
Numeric keypadCharacter
1 ....

Getting started4
bizhub 131f/190f 4-5To change upper and lower case
Press [#] key to toggle upper case and lower case.
The word Upper means the machine will enter only upper-case letters.
The word Lower means the machine will enter only lower-case letters.
Entering the symbol
You can also enter special characters or symbols.
1When the machine prompts you to 
enter a name, press [1] key.
The LCD changes to:
2Select the character you want to enter using [*], [)], [+] or [,] key.
3To enter the character,...

4Getting started
4-6 bizhub 131f/190f
4.1.3 Memory back-up [CD]
For further information, see “4 Getting started” in the extended manual 
on the CD-R.
4.1.4 How to select the function [CD]
For further information, see “4 Getting started” in the extended manual 
on the CD-R.
4.1.5 Function table [CD]
For further information, see “4 Getting started” in the extended manual 
on the CD-R.
Downloaded From ManualsPrinter.com Manuals