Konica Minolta bizhub 190f User Manual

7Scanning
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Scanning7
bizhub 131f/190f 7-3
7 Scanning
7.1 Getting ready to use the TWAIN driver
7.1.1 Changing your machine to the Scanner mode
%Press the Copy/Fax/Scan button until SCAN light glow.
7.1.2 Display in the scan standby mode
%Press the Copy/Fax/Scan button to change the machine to the scan 
mode.
When the machine is in the scan mode, the machine shows:
-To change the initial setting of, refer “Scanning” on page 7-3.
Resolution
Zoom ratio Scanning width
Downloaded From ManualsPrinter.com Manuals 

7Scanning
7-4 bizhub 131f/190f
7.1.3 Scanning an image
There are two different ways for scanning an image:
Real-time scanning mode (RS mode)
When you choose the Real-time Scanning mode, your machine will scan a 
document and transfer it to your computer immediately. RS mode is the 
mode like most traditional 
document scanners.
Scan-box mode (SB mode)
When you choose the Scan-Box mode, scanned data will be stored into your 
machine’s scan box. You can download it from your application software 
that...

Scanning7
bizhub 131f/190f 7-5
7.2 Using the RS mode [CD]
For further information, see “7 Scanning” in the extended manual on the 
CD-R.
7.3 Using the SB mode [CD]
For further information, see “7 Scanning” in the extended manual on the 
CD-R.
Downloaded From ManualsPrinter.com Manuals 

7Scanning
7-6 bizhub 131f/190f
Downloaded From ManualsPrinter.com Manuals 

8Autodialer
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Autodialer8
bizhub 131f/190f 8-3
8 Autodialer
8.1 Autodialer basics
Your machine’s autodialer stores your most frequently called phone and fax 
numbers for instant recall.
8.1.1 Autodialers
There are two kinds of autodialer numbers. The difference between the two 
is how you dial them:
8.1.2 Call groups
Call groups are sets of fax numbers that make it easy to send the same fax 
message to many different locations.
Your machine can store as many as 200 numbers in up to 32 call groups.
See also “Call group...

8Autodialer
8-4 bizhub 131f/190f
8.1.4 Special dialing characters
Your machine allows you to enter special dialing characters when registering 
the auto-dialer. The chart below briefly describes each of these characters. 
It also tells you what keys to press on your machine to store those characters 
in your autodialer.
2
Note
How to assign the Pause/Dial Opt. to a soft key, see “Special features 
[CD]” on page 12-3.
CharacterWhat it doesKeystroke
/P Each pause lasts two seconds.
If you mast wait for...