Kodak ESP 3250 User Manual

							www.kodak.com/go/aiosupport15 KODAK ESP 3200 Series All-in-One Printer
2. Insert the memory card into the memory card slot. 
3. When the “Print tagged images?” message appears, press 
Start.
Printing 
panoramic 
picturesTo print a panoramic picture, load 4 x 12 in. / 101 x 305 mm paper, or US letter or A4 
paper.
Transferring pictures to a computer
You can transfer .jpg, .mov, and .wav files from a memory card in the printer to your 
computer. To transfer these files, the printer 
must be connected to your computer 
with a USB cable.
NOTE:  If you have large video files or a large number of pictures (400 or more), we 
recommend that you use a memory card reader attached directly to your 
computer to transfer them. 
Transferring 
pictures to a 
WINDOWS 
OS-based 
computer1. Insert the memory card into the memory card slot on the printer. 
2. Press 
Back.
3. If necessary, use the navigation buttons to select 
View and Print Photos.
4. Press 
OK.
5. Press   to select 
Transfer All to PC, then press OK. 
6. Press 
Start.
7. Follow the on-screen instructions on your computer.
Transferring 
pictures to a 
MACINTOSH 
Computer1. Insert the memory card into the memory card slot on the printer. 
2. Press 
Back.
3. If necessary, use the navigation buttons to select 
View and Print Photos.
4. Press 
OK.
5. Press   to select 
Transfer All to PC, then press OK. 
6. Press 
Start.
7. Use iPhoto or Image Capture on your computer to complete the transfer.
MS  
   S
D/
HC  
   MM
C
BackHome
memory card slot
left paper-edge guide 
Downloaded From ManualsPrinter.com Manuals 
						

							16www.kodak.com/go/aiosupport
5Copying
You can copy documents and pictures with your all-in-one printer. The printer 
produces high–quality color or black-and-white copies on a variety of paper types 
(see Paper types, page 7). 
Making a copy
To copy a document or a picture using the default settings:
1. Lift the scanner lid, and place the document or picture face down on the glass. 
2. Close the lid.
NOTE:  Single-button document copy is a feature that lets you put paper on the 
scanner and immediately press 
Start, without following the remaining steps 
below. You can use this feature when the printer has been idle or when it is 
turned on; the printer automatically goes to Copy Document mode.
3. Press 
Home.
4. If needed, press   or   to select 
Copy Document or Copy Photo.
5. Press 
Start to begin copying. 
Changing copy options
You can change the copy options for an individual copy, or you can change the 
settings for copying documents or copying photos, and save them as the defaults. 
Changing copy 
document options To change the copy document options: 
1. Press 
Home. 
2. If necessary, press   to select 
Copy Document.
3. Press 
OK.
M
S     
SD
/HC
     MMC
BackHome
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport17 KODAK ESP 3200 Series All-in-One Printer
4. Press   to go through the options, and press   or   as needed to change the 
settings below:
Copy Document Option Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Copy Size Same Size 
(default)The copy is the same size as the 
original.
Fit to Page The printer detects the size of the 
original on the scanner glass and the 
size of the paper in the paper tray, and 
automatically reduces or enlarges the 
original so that the copy fits on the 
paper.
20% to 500% Reduces up to 20% or enlarges up to 
500% of the original size.
Plain Paper Quality Normal
(default)Good quality output; prints faster than 
Best.
Best The highest quality, but the slowest 
print speed; eliminates the banding 
effect that sometimes occurs when 
printing Draft or Normal.
Draft The fastest print speed, but the lowest 
quality.
Photo Paper Quality Automatic
(default)The printer detects when you load 
photo paper and sets Best quality 
automatically.
Color Color 
(default)Prints full color.
Black & White Prints black and white (gray scale).
Brightness -3 to +3 
(0 is default) Lightens or darkens the copy. 
0 (Normal) is no change from the 
original; -3 is the darkest; +3 is the 
lightest.
Save as Defaults No / Yes To save settings as the new default: 
press OK, select Ye s, then press OK.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying
18www.kodak.com/go/aiosupport
Changing copy 
photo options To change the copy photo options: 
1. Press 
Home. 
2. If necessary, press   to select 
Copy Photo.
3. Press 
OK.
4. Press   to view the options, and press   or   as needed to change the settings 
below:
Copy Photo Option Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Copy Size 2 x 3
3.5 x 5
4 x 6 (default)
4 x 7
5 x 7
4 x 12
8 x 10
8.5 x 11 or A4If the selected copy size is smaller 
than the paper in the paper tray, the 
printer automatically arranges the 
pictures to best fit the paper size. 
Plain Paper Quality  Normal 
(default)Good quality output; prints faster 
than Best.
Best The highest quality.
Draft The fastest print speed.
Photo Paper Quality Automatic
(default)The printer detects when you load 
photo paper and sets Best quality 
automatically.
Color Color 
(default)Prints full color.
Black & White Prints black and white (gray scale).
Brightness -3 to +3 
(0 is default) Lightens or darkens the copy. 
0 (Normal) is no change from the 
original; -3 is the darkest; +3 is the 
lightest.
Save as Defaults No / Yes To save settings as the new default: 
press OK, select Ye s, then press 
OK.
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport19 KODAK ESP 3200 Series All-in-One Printer
Adjusting copy settings
You can change the copy settings for individual copy tasks. A few of the common 
tasks are described below.
Enlarging or 
reducing a 
documentTo enlarge or reduce the size of your copy:
1. Lift the scanner lid, and place the document face down on the glass. 
Note the orientation of the paper on the glass and make sure the paper is flush 
to the edges.
2. Close the lid.
3. Press 
Home.
4. If needed, press   or   to select 
Copy Document.
5. Press 
OK.
6. Press  to select 
Copy Size.
7. Press   or   to select the enlargement or reduction you want.
NOTE:  If you select 
Fit to Page, the printer detects the size of the original on the 
scanner glass and the size of the paper in the paper tray, and automatically 
reduces or enlarges the original so that the copy fits on the paper
8. Press 
Start to begin copying. 
Enlarging or 
reducing a photoTo enlarge or reduce the size of your copy:
1. Lift the scanner lid, and place the photo face down on the glass. 
2. Close the lid.
3. Press 
Home.
4. If needed, press   or   to select 
Copy Photo.
5. Press 
OK.
6. Press  to select 
Copy Size.
7. Press   or   to select the photo size you want.
8. Press 
Start to begin copying. 
MS     SD/HC 
    MMC
BackHome
Downloaded From ManualsPrinter.com Manuals 
						

							Copying
20www.kodak.com/go/aiosupport
Darkening or 
lightening copiesIf the original document or picture is too light or too dark, you can make the copy 
darker or lighter. 
To darken or lighten the copy:
1. Lift the scanner lid, and place the document face down on the glass. 
2. Close the lid.
3. Press 
Home.
4. If needed, press   or   to select 
Copy Document or Copy Photo.
5. Press 
OK.
6. Press  to select 
Brightness.
7. Press   to select a number below zero for a darker copy, or press   to select a 
number above zero for a lighter copy.
8. Press 
Start to begin copying. 
MS
  
  
 SD/
HC
  
   MMC
Ba
ckHome
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport 21
6Scanning
Scanning converts the text and images from the documents and pictures that you 
place on the scanner glass into electronic data, and then sends the data to your 
computer. To scan with your all-in-one printer, it must be connected to a computer 
with a USB cable.
You save the scanned file(s) to your computer; you cannot save to a memory card in 
the printer. 
Before you begin scanning
Change the default scan settings in the Home Center Software. (Click the Tool icon, 
then select 
Printer Scan Settings.)You can adjust the following settings for scanned 
pictures and documents:
• Color / black-and-white / gray scale
• Resolution (dpi) 
• File format (.pdf, .rtf, .tif, .jpg for documents; .jpg, .bmp, .tif for pictures)
• Base name (by default, scanned files are named “scan1”, “scan2”, etc)
• Location (folder) where the scanned files will be saved
Before saving a scanned file, you can preview it in Home Center Software, and crop 
the output as desired. See the Home Center Software Help (
? icon) for instructions.
Simple scanning
To scan a single document or picture: 
1. Lift the scanner lid, and place the document or picture face down on the glass. 
2. Close the lid.
3. Open Home Center Software, then:
• On a WINDOWS OS-based computer, select 
Scan Pictures and Documents, 
then follow the on-screen instructions.
• On a MACINTOSH Computer, select 
Tools > Scan Application, then follow 
the on-screen instructions. 
MS     SD/HC     MMC
BackHome
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning
22www.kodak.com/go/aiosupport
Scanning multiple pictures simultaneously 
Using Home Center Software, you can scan multiple pictures simultaneously and 
save them as separate files. 
NOTE:  For Home Center Software to interpret two or more pictures, the scan option 
must be set to Picture. 
When scanning multiple pictures, leave space between the pictures so that the 
printer can detect the separate pictures. Any pictures that overlap are interpreted as 
a single picture. 
Scanning multiple 
pictures with a 
WINDOWS 
OS-based 
computerTo scan multiple pictures simultaneously and save them as separate files: 
1. Lift the scanner lid, and place the pictures face down on the glass leaving space 
between the pictures. 
2. Close the lid. 
3. Open Home Center Software, then select 
Scan Pictures and Documents. 
4. Open the Tools panel, if it is not open, by clicking the 
Tools icon.
5. Click 
Printer Scan Settings.
6. Select the 
Picture tab.
7. S e l e c t  
Automatically Detect Pictures, if it is not selected, then click OK.
8. Make sure 
Picture is selected, then follow the on-screen instructions. 
NOTE:  Click the Help icon for additional instructions. 
Scanning multiple 
pictures with a 
MACINTOSH 
Computer To scan multiple pictures simultaneously and save them as separate files: 
1. Lift the scanner lid, and place the pictures face down on the glass leaving space 
between the pictures. 
2. Close the lid. 
3. Open Home Center Software, then select the 
Tools tab.
4. Select 
Color Picture or Black and White Picture.
5. Click the 
Scan Application button.
6. Select 
Automatically detect multiple pictures, if it is not selected.
7. C l i c k  
Preview or Scan All, and follow the on-screen instructions.
NOTE:  Click the Help icon for additional instructions. 
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport 23
7Maintaining Your Printer
Your printer requires little maintenance. However, Kodak recommends cleaning the 
scanner glass and lid regularly to remove dust and fingerprints, which affect the 
quality and accuracy of scanning.
Except for cleaning the printer, keep the printer plugged in with AC power turned on. 
If you use a power strip, don't turn off the power strip.
Keep the printhead and ink cartridges in the printer at all times. This helps prevent 
damage to the printhead.
Service agreements are available in some countries. Contact dealers of KODAK 
Products for more information. 
For recycling and/or disposal information, contact your local authorities. In the US, 
go to the Electronics Industry Alliance at www.eia.org or go to 
www.kodak.com/go/recycle. 
General care and cleaning
CAUTION:
Always disconnect the power to the printer before cleaning it. Do not use 
harsh or abrasive cleaners or organic solvents on the printer or any of its 
parts.
• To clean the printer, wipe the outside with a clean, dry cloth.
• Keep the surrounding area vacuumed and litter-free. 
• Protect the printer from tobacco smoke, dust, sand, other small particles (such 
as crumbs), and liquid spills. 
• Do not place objects on the printer. 
• Keep the printer supplies away from direct sunlight and out of high-temperature 
environments.
• Do not allow chemicals, such as suntan lotion, to come into contact with the 
painted surface of the printer. 
• If the printer has been exposed to bad weather or has water inside it, turn it off 
and let it dry completely. If this does not solve the problem, contact Kodak 
Service & Support.
Downloaded From ManualsPrinter.com Manuals 
						

							Maintaining Your Printer
24www.kodak.com/go/aiosupport
Cleaning the 
scanner glassFor good quality copies and scans, ensure the printer's scanner glass and lid backing 
are clean; dust the exterior as needed. 
CAUTION:
Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, 
as these chemicals may damage it. Do not pour or spray liquid directly on the 
glass; the liquid might seep under the glass and damage the printer.
To clean the scanner glass: 
1. Unplug the printer and raise the scanner lid. 
2. Wipe the glass with a soft cloth or sponge, slightly moistened with a 
nonabrasive glass cleaner. 
3. Dry the glass with a lint-free cloth.
4. When finished cleaning, plug in the printer.
MS 
  
  SD/HC     MMC
BackHome
Downloaded From ManualsPrinter.com Manuals