Kodak ESP 3250 User Manual

							www.kodak.com/go/aiosupport5 KODAK ESP 3200 Series All-in-One Printer
Setting your 
printer as the 
default printerIf you have more than one printer, and after installation your all-in-one printer was 
not the default printer, you can make your all-in-one printer your default printer. 
For all computers and operating systems: If you haven’t yet installed the printer 
software, insert the software CD that came with your printer and follow the 
on-screen instructions to install the software.
For WINDOWS XP OS-based computers
1. Select Start > Control Panel > Printers and Faxes.
2. Right-click your printer, and select 
Set as Default Printer. 
For WINDOWS VISTA OS-based computers
1. Select Start > Control Panel > Hardware and Sound > Printers.
2. Right-click your printer, and select 
Set as Default Printer.
For WINDOWS 7 OS-based computers
1. Select Start > Control Panel > Hardware and Sound > Devices and Printers.
2. Right-click your printer, and select 
Set as Default Printer.
For MACINTOSH Computers
When a new printer is installed, it becomes the default printer. If your all-in-one 
printer is not the default printer:
1. From the dock, open 
System Preferences.
2. In the 
Hardware section, click Print & Fax.
3. Select your printer from the drop-down list next to 
Default Printer.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you already have an 
ESP 7 printer and now you adding an ESP 3250 printer), you must install the 
software for the newer model.
If you are connecting to another ESP 3250 printer or to an older model:
• On a WINDOWS OS-based computer:
a. Select 
Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
b. If your all-in-one printer 
is not listed: 
• Select 
No, my printer is not listed, then click Next.
• From the drop-down list, select your printer.
• Select 
USB Cable - connect your cable now. 
• Connect the USB cable to the computer and printer.
•Click 
Next. 
When your printer is detected, driver installation begins
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring Your Printer
6www.kodak.com/go/aiosupport
c. If your all-in-one printer is listed:
• Highlight the all-in-one printer that is connected to your network.
• Select 
Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
d. When driver installation is complete, click 
Done. 
• On a MACINTOSH Computer:
a. From the dock, open 
System Preferences.
b. Click 
Print & Fax.
c. Click the 
+ sign to add the printer.
d. Select the printer from the list of available printers, then click 
Add.
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport 7
3Handling Paper
For the best photo printing results, use KODAK Photo Papers, which are optimized to 
work with KODAK All-in-One Printers. 
For the best document printing results, use KODAK Document Papers or a paper 
with the COLORLOK Technology logo on the package. Use only paper that is 
designed for inkjet printers.
When handling paper:
• Hold the paper by the edges; avoid placing your fingerprints on it.
• Do not touch the glossy side of photo paper.
• Store paper flat, away from direct sunlight and heat.
Paper types
You can use: 
• Plain paper — 20 to 24 lb / 75 to 90 gsm
• Photo paper — up to 12 mil (290 gsm)
• Card stock — 110 lb / 200 gsm, max
• Envelopes — most standard types
• Transparencies — inkjet variety with white stripe
• Labels — all inkjet varieties on 8.5 x 11-in. or A4 sheets
• Iron-on transfers — all inkjet varieties on 8.5 x 11-in. or A4 sheets
Paper sizes
The printer accepts the following paper sizes: 
• 4 x 6 in. / 101 x 152 mm
• 4 x 7 in. / 101 x 178 mm
• 4 x 12 in. / 101 x 305 mm
• 5 x 7 in. / 127 x 178 mm
• 8 x 10 in. / 203 x 254 mm
• 8.5 x 11 in. / 216 x 279 mm
• 8.5 x 14 in. / 216 x 356 mm
• A4 (8.27 x 11.69 in. / 210 x 297 mm) 
• A5 (5.83 x 8.27 in. / 148 x 210 mm)
• A6 (4.13 x 5.83 in. / 105 x 148 mm)
• B5 (6.93 x 9.48 in. / 176 x 250 mm)
NOTE:  Do not load paper smaller than 4 x 6 in. / 101 x 152 mm or A6.
Downloaded From ManualsPrinter.com Manuals 
						

							Handling Paper
8www.kodak.com/go/aiosupport
Envelope sizes
The printer accepts the following envelope sizes: 
• C5 (6.38 x 9 in. / 162 x 229 mm)
• C6 (4.5 x 6.38 in. / 114 x 162 mm)
• DL (4.31 x 8.69 in. / 110 x 220 mm)
• US #7¾ (3.88 x 7.5 in. / 98 x 190 mm)
• US #9 (3.88 x 8.88 in. / 98 x 225 mm)
• US #10 (4.13 x 9.5 in. / 105 x 241 mm)
IMPORTANT: Do not load envelopes with cutouts or with cellophane windows. 
Loading paper
Loading plain 
paperThe paper tray capacity is 100 sheets of plain paper.
To load plain paper:
1. Open the paper tray. 
2. Pull out the paper tray extender until it is fully extended. 
3. Lift the paper stop.
4. Make sure the left paper-edge guide is to the far left. 
MS     SD/HC     MMC
BackHome
MS     SD/HC     MMC
BackHome
left paper-edge guide 
paper tray extender
paper stop
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport9 KODAK ESP 3200 Series All-in-One Printer
5. Carefully fan and stack the paper, then insert it into the tray.
6. Move the paper forward until it stops.
7. Move the left paper-edge guide until it touches the paper.
Loading photo 
paper The paper tray capacity is 20 sheets of photo paper.
To load photo paper: 
1. Remove any paper from the tray.
2. Carefully fan and stack the photo paper, then insert the paper (short side first) 
into the tray with the 
logo side facing up.
3. Move the paper forward until it stops.
4. Move the left paper-edge guide until it touches the paper.
MS    
 S
D/H
C   
  MMC
BackHom
e
left paper-edge guide 
MS     SD/HC     MMC
BackHome
left paper-edge guide 
Downloaded From ManualsPrinter.com Manuals 
						

							Handling Paper
10www.kodak.com/go/aiosupport
Loading 
envelopesThe paper tray capacity is 20 envelopes.
To load envelopes: 
1. Remove any paper from the tray.
2. Insert the envelope(s) into the tray with the flap up and against the right side of 
the tray.
3. Move the left paper-edge guide until it touches the envelope(s). 
left paper-edge guide 
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport 11
4Printing Pictures
The quickest way to print pictures is from a memory card inserted into the printer. 
Another way to print pictures is to use Home Center Software on your computer 
running the WINDOWS Operating System. Home Center Software lets you edit and 
enhance your pictures on your computer before printing. Open Home Center 
Software, select 
Print Pictures, then follow the on-screen instructions. 
If you have a MACINTOSH Computer, print your pictures using KODAK 
EASYSHARE Software, iPhoto, or another picture-editing program. 
Changing Print Photos Options / Defaults
You can change the print photos options for an individual picture or group of 
pictures, or you can change the settings and save them as the default. 
To change print photos options: 
1. Press 
Home.
2. If necessary, press   to select 
View and Print Photos, then press OK.
3. Press  or  as needed to change the settings below. 
Print Photos Option Settings Description
View Photos -- Scroll through the pictures on the 
memory card.
Transfer All to PC --To transfer all the pictures on the 
memory card to your computer, press 
OK then Start. (Your printer and 
computer must be connected with a USB 
cable.)
Quantity 1 (default) to 99 The number of copies that print.
Print Size 2 x 3
3.5 x 5
4 x 6 (default)
4 x 7
5 x 7
4 x 12
8 x 10
8.5 x 11 or A4If the selected copy size is smaller than 
the paper in the paper tray, the printer 
automatically arranges the pictures to 
best fit the paper size. 
Plain Paper Quality Normal (default) Good quality output; prints faster than 
Best.
Best The highest quality.
Draft The fastest print speed.
Photo Paper Quality Automatic
(default)The printer detects when you load photo 
paper and sets Best quality 
automatically.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Pictures
12www.kodak.com/go/aiosupport
Printing pictures from a memory card
Types of memory 
cardsYour printer accepts the following memory cards: 
• SD Card
• SDHC Card
• MMC Card
•Memory Stick
• Variations of the memory cards listed above that require an adapter (for 
example, MEMORY STICK Duo, miniSD, and microSD)
IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove 
the adapter and the memory card as a unit; do not remove the memory card 
while leaving the adapter in the printer.
Printing a picture 
using the default 
settingsIf you use the default settings, one 4 x 6 in. / 101 x 152 mm picture is printed.
To print a picture: 
1. Load photo paper with the logo side facing up (see Loading photo paper, 
page 9), and move the left paper-edge guide until it touches the paper.
Color Color (default) Prints full color.
Black & White Prints black and white (gray scale).
Scene Balance  On (default)
Off Adjusts the image brightness to correct 
for underexposure and reduces the 
variation in contrast in different areas of 
the picture.
Add Date to Prints No (default)
Ye sPrints the date of the picture(s) (the date 
the picture was taken or last edited) in a 
corner of the print.
Save as Defaults No (default)
Ye sTo save settings as the new default, press 
OK, select Ye s, then press OK. Print Photos Option Settings Description
Downloaded From ManualsPrinter.com Manuals 
						

							www.kodak.com/go/aiosupport13 KODAK ESP 3200 Series All-in-One Printer
2. Insert the memory card into the memory card slot. 
3. Press  or  to display the picture you want to print.
4. Press 
Start to begin printing.
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the 
printer while printing.
Printing pictures 
using non-default 
photo optionsTo print pictures with options other than the default settings (such as a different 
print size, black-and-white instead of color, or a date on the print): 
1. Load photo paper with the logo side facing up (see Loading photo paper, 
page 9), and move the left paper-edge guide until it touches the paper.
2. Press 
Back.
3. If necessary, use the navigation buttons to select 
View and Print Photos.
4. Press 
OK.
MS  
   S
D/
HC  
   MM
C
BackHome
memory card slot
left paper-edge guide 
MS     SD/HC     MMC
BackHome
memory card slot
left paper-edge guide 
Downloaded From ManualsPrinter.com Manuals 
						

							Printing Pictures
14www.kodak.com/go/aiosupport
5. Press   to select the option you want to change (for example, Quantity, Print 
Size, Color, Scene Balance, or Add Date to Print).
6. Press   to change the selection.
7. Repeat steps 5 and 6 for each option you want to change. 
8. When you are done changing options, press   to select 
Vi e w  P h o t o s, then 
press 
OK.
9. Insert the memory card into the memory card slot. 
10. Press  or  to select the picture you want to print, then press 
OK. A check 
mark on the LCD indicates the picture is selected. 
NOTE:  To deselect the picture, press 
OK again.
11. To select additional pictures, press  or until the picture is displayed, then 
press 
OK. 
12. When you are done selecting pictures, press 
Start to begin printing. 
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the 
printer while printing.
Printing tagged 
picturesSome digital cameras let you tag (or “mark”) pictures on the memory card for 
printing. This creates a tag that is recognized by the printer. If you choose to print 
tagged pictures, they will be printed according to the default settings on your printer 
(unless otherwise specified by the tag from the camera).
NOTE:  Refer to your camera user guide to determine whether your camera supports 
tagged (also “marked” or “DPOF”) functionality.
To print tagged pictures:
1. Load photo paper with the logo side facing up (see Loading photo paper, 
page 9), and move the left paper-edge guide until it touches the paper.
Downloaded From ManualsPrinter.com Manuals