Home > Keurig > Coffeemaker > Keurig B150 User Manual

Keurig B150 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Keurig B150 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 23 Keurig manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							USING YOUR BREWER
    OWNER’S MANUAL: Getting the most from your new 
    Keurig® B150 Brewer
    COMMENT UTILISER VOTRE CAFETIÈREMANUEL D’UTILISATION : Tirez le meilleur de votre nouvellecafetière B150 de Keurig®  
    						
    							2
    IMPORTANT SAFEGUARDS  Safe Operation & Use
    When using electrical appliances, basic 
    safety precautions should be followed, 
    including the following:
     1. Read all instructions before using.
     2. Do not touch hot sur faces. Use handles and 
    knobs when available.
     3. This appliance must be properly installed 
    and located in accordance with these 
    instructions before it is used.
     4. The use of accessor y attachments not 
    recommended by the appliance manufac-
    turer may result in fire, electrical shock or 
    injur y to persons.
     5. Do not place on or near a hot gas or 
    electric burner, or in a heated oven.
     6. Do not use outdoors.
     7.  To protect against fire, electric shock and 
    injur y do not immerse cords, plugs, or the 
    appliance in water or any other liquid.
     8. Do not over fill the Water Reser voir.
     9.  Use only water in this appliance! Do not 
    put any other liquids or foods in the Water 
    Reser voir except as directed in the 
    Cleaning Instructions.
    10.Turn off and unplug the Brewer before 
    cleaning or maintenance. Allow to cool 
    before putting on or taking off par ts and before cleaning the appliance.
    11.   For best operation, plug the appliance 
    into its own electrical outlet on a 
    dedicated circuit to prevent flickering 
    of lights, blowing of fuses or tripping a 
    circuit breaker.
    12 .  Do not operate any appliance with a 
    damaged cord or plug or after the 
    appliance malfunctions or is damaged in 
    any manner. Contact Keurig
    ® Customer 
    Ser vice to repor t any malfunction of or 
    damage to the Brewer.
    13.  Do not let the cord hang over the edge 
    of the table or counter, or touch hot 
    surfaces.
    14 .  To disconnect, turn Power Button to ‘OFF’ 
    status and then remove the plug from the 
    wall outlet.
    15.  Close super vision is necessar y when any 
    appliance is used by or near children.
    16.  Do not lift the Handle to open the Lid of 
    the Brewer while brewing is in progress.
    17.  Always keep the Water Reser voir Lid on 
    unless you are refilling it.
    18.  This appliance is equipped with a power 
    cord having a grounding wire with a 
    grounding plug. The appliance must 
    be grounded using a 3-hole properly grounded outlet. In the event of an 
    electrical shor t circuit, grounding 
    reduces the risk of electrical shock.
    19.  If the outlet is a standard 2-prong wall 
    outlet, it is your personal responsibility 
    and obligation to have it replaced with a 
    properly grounded 3-prong wall outlet.
    20.  
    Do not, under any circumstances, cut 
    or remove the third (ground) prong 
    from the power cord or use an adapter.
    21.  Consult a qualified electrician if the 
    grounding instructions are not completely 
    understood, or if doubt exists as to whether 
    the appliance is properly grounded.
    22.  
    Do not use the appliance for other 
    purposes than its intended use.
    SAVE THESE
     INSTRUCTIONS.
    WARNING TO USERS AND PARENTS
    1. DO NOT permit children to use brewer unless there 
    is adult super vision. Brewer dispenses ver y hot water.
    2. SPECIAL NOTICE FOR HOT COCOA USERS:  
    IMMEDIATELY AFTER USING A HOT COCOA K-CUP, 
    RUN a Hot Water Brew Cycle without a K-Cup to 
    avoid the possibilit y of clogging the exit needle. 
    DO NOT assume the next user will do this.  
    						
    							3
    Removing the serial number label from the Brewer will void warr ant y. 
    CAUTION: There are two sharp needles that puncture the K-Cup® 
    por tion pack, one above the K-Cup Holder and the other in the 
    bottom of the K-Cup Holder. To avoid risk of injur y, do not put 
    your fingers in the K-Cup Assembly Housing.
    CAUTION: There is extremely hot water in the K-Cup Holder during 
    the brewing process. To avoid risk of injur y, do not lift the Handle or 
    open the K-Cup Assembly Housing during the brewing process.
    If an extension cord is used, (1) the marked electrical rating of the 
    cord set or extension cord should be at least as great as the electrical 
    rating of the appliance; (2) the cord should be arranged so that it will 
    not drape over the counter top or tabletop where it can be pulled on 
    by children or tripped over unintentionally; and (3) the extension cord 
    must include a 3-prong grounding plug.
    THIS PRODUCT IS FOR 
    COMMERCIAL USE
    WARNING THIS PRODUCT CONTAINS CHEMICALS, INCLUDING 
    LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, 
    BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
    WARNING
    WARNING: TO REDUCE THE RISK OF FIRE OR 
    ELECTRIC SHOCK, DO NOT REMOVE THE 
    BOTTOM COVER. NO USER SERVICEABLE 
    PARTS ARE INSIDE. REPAIR SHOULD BE DONE 
    BY AUTHORIZED SERVICE PERSONNEL ONLY.
    RISK OF FIRE OR 
    ELECTRIC SHOCK 
    DO NOT OPEN
    !
    TABLE OF CONTENTS
    KEURIG® GOURME T SINGLE CUP BRE WING SYSTEM
    KEURIG
    ® B150 — Using Your Brewer
    SET-UP
    Helpful Hints ........................................................................................
    4
    Unpacking ............................................................................................4
    Features ...............................................................................................5
    SECTION 1 — SET-UP & FIRST BRE W
    Set-Up & First Brew ...........................................................................6
    SECTION 2 — MENU CONTROL S & INDICATORS
    Setting the Clock ...............................................................................12
    Programming Brew Temperature .................................................12
    Programming Brew Size .................................................................13
    Programming On/Off Features ......................................................13
    SECTION 3 — CLEANING & MAINTENANCE
    Cleaning ..............................................................................................15
    De-Scaling..........................................................................................16
    Storage ...............................................................................................17
    SECTION 4 — TROUBLESHOOTING ..................................................18
    SECTION 5  — WARR ANT Y ................................................................19
    Pour des directives en français, veuillez vous repor ter à la page 20.
    Record your Brewer Serial Number here. 
    						
    							Set-up
    Helpful Hints 
    1.  Keep your Brewer turned “ON” at all times. 
    To brew a fresh cup of coffee, tea or hot cocoa
    any time you want, we suggest you keep your
    Brewer turned “ON” all the time. However, the 
    Brewer is fully programmable so you can set it 
    to turn on and off automatically to match your 
    schedule. Or, if you prefer, set the Brewer to 
    automatica
    lly turn off after a period of time.
    Follow the simple instructions on pages
     13 –14 
    to make using the Brewer convenient for you.
    2.  For the best tasting gourmet coffee, tea or
    hot cocoa, Keurig recommends using bottled
    water or the Keurig
    ® Water Filter Star ter Kit 
    (available at www.keurig.com). 
    Water qualit y varies from place to place. If you 
    notice an undesirable taste in your cup of 
    coffee, such as chlorine or other min
    eral tastes, 
    we recommend you consider using bottled 
    water or water from a filtration system.
    3.  Customize the Size, Flavor & Brew That’s 
    Per fect for You.™
    With the choice of over 200 varieties of K-Cup® 
    por tion packs and 5 brew sizes (Small Cup-4 
    oz., Small Mug-6 oz., Medium Mug-8 oz., Large 
    Mug-10 oz., and Travel Mug-12oz.) your Keurig
    ® 
    Brewer gives you endless options to customize 
    the size, flavor and brew that’s per fect for you. 
    For a strong, intense cup, select an Extra Bold 
    K-Cup
    ® (with up to 30% more ground coffee 
    than regular varieties) and brew the size that’s 
    right for you. The smaller the brew size, the 
    more intense flavor in your cup. The larger the 
    brew size, the less intense flavor in your cup. 
    4.  Plug Brewer into its own grounded outlet.
    If the electric circuit is overloaded with other 
    appliances, your Brewer may not function 
    properly. The Brewer should be operated on its 
    own circuit, separate from other appliances.
    5.  Brewing into a travel mug.
    To brew into a travel mug, simply remove the
    Drip Tray A ssembly and place the travel mug
    on the Drip Tray Base.
    6.  De-scale Brewer regularly.  
    Please see pages 16 and 17 for instructions.
    Unpacking Instructions
    1.  Place Brewer box on a large steady sur face
    (such as a table or counter top) or on the floor. 
    Open the box.
    2. Remove enclosed literature.
     3. Turn the box on its side with the front of the 
    box face down.
     4. Reach into the box and grasp the foam inser t 
    that contains the Brewer.
     5. Carefully pull the foam inser t toward you 
    and out of the box. The Brewer will still be 
    encased in the poly foam and be on its side.
     6. Remove the top poly foam packaging material.
     7. Carefully lift Brewer off of the bottom poly foam 
    and place it upright on a flat, steady sur face.
     8. Lift plastic bag off of Brewer.
     9. Record the serial number for this Brewer on 
    page 3 of this guide. The serial number can be 
    found on the bottom of the Brewer box or on the 
    bottom of the Brewer.
    10.   Place the Brewer upright on a flat, steady 
    sur face. Remove tape holding Water Reser voir 
    in place. 
    We recommend you save all packing materials in 
    case future shipping of the product is necessar y.
    WARNING:  
    Keep all plastic bags away
    from children.
    4 
    						
    							5
    A. Water Reser voir Lid
    B.  Water Reservoir
    C.   Water Reser voir
    Lock Tab Slots
    A
    M
    C
    I
    L
    K
    J
    F
    E
    B
    P
    N
    0
    D. Handle
    E.  K-Cup® Holder Funnel
    F.    K-Cup  Holder (E and F are 
    the K-Cup Holder A ssembly) 
    G. K-Cup A ssembly 
     Housing
    H.  Lid 
     I. Drip Tray Base
    J. Drip Tray
    K. Drip Tray Plate
    L. LCD Screen
    M. BRE W Button
    N. Housing
    O.  Power Switch 
    P.  Power Cord
    H
    G
    D
    Features  Keurig® — Model B150 Brewer
    Keurig® B150 Brewer 
    						
    							SECTION 1  Set-Up & First Brew
    Setting Up Your Brewer
    1.  
    Remove all pieces of packing tape for the 
    brewer and Drip Tray. Remove the clear plastic 
    film from the LCD Display. Unwrap cord and 
    plug the Brewer into a grounded outlet. 
    2.  Turn the Brewer on, the Power Switch is 
    located at the top left hand side of the Brewer 
    on the back. The Brewer’s LCD Display will 
    display the power up welcome screen (fig. 1).
    3.  Remove the Water Reser voir from Brewer 
    by first removing Lid from the Water Reser voir 
    then lifting the Water Reser voir straight up 
    and toward the right of the Brewer (may be 
    tight). Rinse the Water Reser voir thoroughly 
    with fresh, clean water.
    IMPORTANT: You cannot use your Keurig® Brewer 
    until it has been set up for its fi rst use.
    NOTE: If Brewer has been exposed to temperatures
    below freezing, allow Brewer at least two hours to 
    reach room temperature before brewing. A frozen 
    or extremely cold Brewer will not operate.
    4.  Fill the Water Reser voir up to the 
    fill mark with fresh, clean water. 
    Replace the Water Reser voir on 
    the Brewer making sure that 
    the locking tabs engage with the 
    Brewer (fig. 2). Replace Lid on 
    Water Reser voir.
    5.  The Brewer will automatically fill 
    the Internal Hot Water Tank with 
    water and then the water will 
    be heated. This will take about 
    3 minutes. During the heating 
    period, “HEATING PLEASE WAIT” 
    will be displayed on the LCD 
    Screen (fig. 3). 
    6.  Place a 10 oz. mug on the Drip Tray Plate, 
    then fully raise and lower the Brewer Handle. 
    The Brew Button will now be illuminated. 
    Press the Brew Button to star t a cleansing 
    brew. 
    NOTE: A K-Cup should not be used for 
    this sequence.
    7.
      When the cleansing brew is complete, the 
    Brewer will go into its idle state and will be 
    ready to brew your first K-Cup
    ® por tion pack.
    fi g. 3fi g. 1
    6
    fi g. 2
    Welcome To The 
    Keurig B150 Brewing 
    System Designed 
    For The K-Cup
    ® 
    Portion Pack
    EspañolFrançais
    Heating...
    Please Wait  
    						
    							 7. There may be a shor t pause prior to coffee 
    being dispensed. The entire brew process 
    lasts for approximately 1 minute and ends 
    with a burst of air to remove all liquid from 
    the K-Cup.
    CAUTION: There is extremely hot water in 
    the K-Cup Holder during the brew process. 
    To avoid risk of injur y, do not lift the Handle 
    or open the K-Cup A ssembly Housing during 
    the brew process.
     8.
     The end of brew is indicated by “KEURIG 
    BREWED ENJOY”. 
     9. Lift the Handle, remove and dispose 
    of the used K-Cup. 
    CAUTION: K-Cup will be hot.
    10.
      Enjoy your first cup of Keurig Brewed® 
    gourmet coffee, tea or hot cocoa!
    11.  Your Brewer may display “HE ATING 
    PLE A SE WAIT” as it heats water for the 
    next brew cycle. 
    Ready to Brew Your First Cup
    1.   The LCD Display will be in its idle state (fig. 4).
    2.  
    Lift the Handle. The K-Cup® Holder 
      will open toward you (fig. 5).
    3.  Select a K-Cup por tion pack.
    NOTE: Do not remove the foil lid 
    or puncture the K-Cup.
    4.  
    Place a K-Cup por tion pack 
    in the K-Cup Holder (fig. 6).
    CAUTION: There are two sharp needles that
    puncture the K-Cup, one above the K-Cup Holder 
    and the other in the bottom of the K-Cup Holder. 
    To avoid risk of injur y, do not put your fingers in 
    the K-Cup A ssembly Housing.
    5.   
    Lower the Handle to close the Lid over the
    K-Cup Holder. (When it is closed completely,
    the BRE W Button will flash up to 60 seconds.)
    6.  Place a mug on the drip tray and select 
    your brew size (fig. 7), then press BRE W (fig. 8).
    NOTE: If you do not press BRE W within 60 
    seconds the Brewer will return to its idle state 
    and the Brew Button will cease to flash to prevent 
    accidental activation. Re-activate by raising the 
    handle fully and then closing it.
    fi g. 4
    fi g. 6
    fi g. 5fi g. 7
    7
    fi g. 8
    12: 3 0 P M
    Ready
    Choose Your 
    K-Cup
    ® &           
    Lift Handle
    WATER 
    LEVEL
    EspañolFrançais
    Select 
    Brew Size
    4 OZ.
    12 OZ . 6 OZ.
    10 OZ.8 OZ.  
    						
    							Stopping the Brew Process
    If you need to stop the brewing after the process has star ted, press and 
    release the Power Switch to turn the Brewer ‘OFF’. The flow of coffee, tea or 
    hot cocoa will stop and the heating element and the LCD Screen will shut off.
    NOTE: You may get more coffee, tea or hot cocoa in your cup during your next 
    brew. We recommend that you per form a cleansing brew with water only after a 
    terminated brew. Then your next brew will be the volume you have selected.
    Adding Water
    The LCD Display of your Brewer will indicate 
    when the water level in the Reservoir is low 
    or if the Water Reser voir  has been removed by 
    displaying the words “FILL WATER RESERVOIR” 
    (f ig. 9). The Brewer will not allow you to brew 
    when “FILL WATER RESERVOIR” is displayed 
    (fig. 9). 
    The Water Reser voir can be filled in three ways. 
    1.
      Remove the Water Reser voir from Brewer by 
    first removing Lid from the Water Reser voir, 
    then lifting the Water Reser voir straight up 
    and toward the right of the Brewer. Fill with 
    water. Place the Water Reser voir back on the 
    Brewer and replace the Lid.
    IMPORTANT: Do not remove the Water Reser voir 
    during the brewing process.
    2. 
      Lift off the Water Reser voir Lid and pour 
    water directly into the Water Reser voir 
    while it is still attached to the Brewer, 
    then replace the Lid.
    3.   The Brewer can also be connected directly into 
    the water line. To order a B150 Direct Plumb Kit 
    please call 1.888.CUP.BRE W (287.2739).
    SECTION 1Set-Up & First Brew (continued)
    fig. 9
    8
    2. Fill Water Reser voir  
    						
    							9
    Brewing Hot Water
    Your Brewer is able to produce hot water for making hot cocoa from a 
    packet, or for use in cooking, etc. Simply follow the instructions on page 7,  
    “Ready To Brew Your First Cup” without adding a K-Cup.
     
    NOTE: After brewing a hot cocoa K-Cup, we recommend running a hot water   
     brew cycle without a K-Cup.
    Purging the Brewer
    If your Brewer has not been used for more than one week, you should 
    purge the water from the internal water tank.
    1.  If there is water in the Water Reser voir, remove the Lid, then lift the 
    Water Reser voir straight up and away from Brewer. Discard water, 
    rinse and refill with water. Place the Water Reser voir back on the 
    Brewer and replace the Lid. (If there is no water in the Water Reser voir, 
    simply refill.)
    2.  Be sure the Brewer is turned ‘ON’. Raise and lower the Handle on the 
    Brewer without inser ting a K-Cup.
    3.  The LCD Display  will be in its idle state (fig.4).  
    4.  Place a large mug on the drip tray and 
    select Large Mug (10 oz. ser ving) brew size 
    from the Select Brew Size Menu (fig.10).
    5.  Discard water.
    6.  Repeat steps 2 - 5 t wo more times to 
    completely purge water from the Internal 
    Hot Water Tank.
    fig. 10
    Select 
    Brew Size
    4 OZ.
    12 OZ . 6 OZ.
    10 OZ.8 OZ. 
    						
    							Menu Mode
    To enter the MENU MODE the Brewer’s power must be off. 
    Press and hold your finger on the display while pressing and releasing 
    the power switch. Continue pressure on the display for 5 seconds (fig.11). 
    The MENU screen will appear. (fig.12).
    Press any line item to enter the set up for that par ticular feature. 
    Please reference the Menu navigation on page 11.
    If you are experiencing any problems with your Brewer, please contact 
    Customer Ser vice at 1.888.CUP.BRE W (287.2739).
    10
    5 seconds.
    SECTION 2  Menu Controls & Indicators
    Home
    Auto OFF Brew Temp
    LanguageClock
    ON/OFF TimeBrew Size(s)
    Contact
    fi g. 11
    fi g. 12 
    						
    All Keurig manuals Comments (0)

    Related Manuals for Keurig B150 User Manual