Keurig B150 User Manual

USING YOUR BREWER
OWNER’S MANUAL: Getting the most from your new 
Keurig® B150 Brewer
COMMENT UTILISER VOTRE CAFETIÈREMANUEL D’UTILISATION : Tirez le meilleur de votre nouvellecafetière B150 de Keurig®  

2
IMPORTANT SAFEGUARDS  Safe Operation & Use
When using electrical appliances, basic 
safety precautions should be followed, 
including the following:
 1. Read all instructions before using.
 2. Do not touch hot sur faces. Use handles and 
knobs when available.
 3. This appliance must be properly installed 
and located in accordance with these 
instructions before it is used.
 4. The use of accessor y attachments not 
recommended by the appliance manufac-
turer may result in fire, electrical shock or...

3
Removing the serial number label from the Brewer will void warr ant y. 
CAUTION: There are two sharp needles that puncture the K-Cup® 
por tion pack, one above the K-Cup Holder and the other in the 
bottom of the K-Cup Holder. To avoid risk of injur y, do not put 
your fingers in the K-Cup Assembly Housing.
CAUTION: There is extremely hot water in the K-Cup Holder during 
the brewing process. To avoid risk of injur y, do not lift the Handle or 
open the K-Cup Assembly Housing during the brewing...

Set-up
Helpful Hints 
1.  Keep your Brewer turned “ON” at all times. 
To brew a fresh cup of coffee, tea or hot cocoa
any time you want, we suggest you keep your
Brewer turned “ON” all the time. However, the 
Brewer is fully programmable so you can set it 
to turn on and off automatically to match your 
schedule. Or, if you prefer, set the Brewer to 
automatica
lly turn off after a period of time.
Follow the simple instructions on pages
 13 –14 
to make using the Brewer convenient for you.
2.  For the...

5
A. Water Reser voir Lid
B.  Water Reservoir
C.   Water Reser voir
Lock Tab Slots
A
M
C
I
L
K
J
F
E
B
P
N
0
D. Handle
E.  K-Cup® Holder Funnel
F.    K-Cup  Holder (E and F are 
the K-Cup Holder A ssembly) 
G. K-Cup A ssembly 
 Housing
H.  Lid 
 I. Drip Tray Base
J. Drip Tray
K. Drip Tray Plate
L. LCD Screen
M. BRE W Button
N. Housing
O.  Power Switch 
P.  Power Cord
H
G
D
Features  Keurig® — Model B150 Brewer
Keurig® B150 Brewer 

SECTION 1  Set-Up & First Brew
Setting Up Your Brewer
1.  
Remove all pieces of packing tape for the 
brewer and Drip Tray. Remove the clear plastic 
film from the LCD Display. Unwrap cord and 
plug the Brewer into a grounded outlet. 
2.  Turn the Brewer on, the Power Switch is 
located at the top left hand side of the Brewer 
on the back. The Brewer’s LCD Display will 
display the power up welcome screen (fig. 1).
3.  Remove the Water Reser voir from Brewer 
by first removing Lid from the Water Reser...

 7. There may be a shor t pause prior to coffee 
being dispensed. The entire brew process 
lasts for approximately 1 minute and ends 
with a burst of air to remove all liquid from 
the K-Cup.
CAUTION: There is extremely hot water in 
the K-Cup Holder during the brew process. 
To avoid risk of injur y, do not lift the Handle 
or open the K-Cup A ssembly Housing during 
the brew process.
 8.
 The end of brew is indicated by “KEURIG 
BREWED ENJOY”. 
 9. Lift the Handle, remove and dispose 
of the used...

Stopping the Brew Process
If you need to stop the brewing after the process has star ted, press and 
release the Power Switch to turn the Brewer ‘OFF’. The flow of coffee, tea or 
hot cocoa will stop and the heating element and the LCD Screen will shut off.
NOTE: You may get more coffee, tea or hot cocoa in your cup during your next 
brew. We recommend that you per form a cleansing brew with water only after a 
terminated brew. Then your next brew will be the volume you have selected.
Adding Water
The...

9
Brewing Hot Water
Your Brewer is able to produce hot water for making hot cocoa from a 
packet, or for use in cooking, etc. Simply follow the instructions on page 7,  
“Ready To Brew Your First Cup” without adding a K-Cup.
 
NOTE: After brewing a hot cocoa K-Cup, we recommend running a hot water   
 brew cycle without a K-Cup.
Purging the Brewer
If your Brewer has not been used for more than one week, you should 
purge the water from the internal water tank.
1.  If there is water in the Water Reser...

Menu Mode
To enter the MENU MODE the Brewer’s power must be off. 
Press and hold your finger on the display while pressing and releasing 
the power switch. Continue pressure on the display for 5 seconds (fig.11). 
The MENU screen will appear. (fig.12).
Press any line item to enter the set up for that par ticular feature. 
Please reference the Menu navigation on page 11.
If you are experiencing any problems with your Brewer, please contact 
Customer Ser vice at 1.888.CUP.BRE W (287.2739).
10
5 seconds....