Keurig 20 550 User Guide
Have a look at the manual Keurig 20 550 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 23 Keurig manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
20 21 RESERVOIR LIGHT NIGHTLIGHT TIMER LIGHTING SAVE TURN NIGHTLIGHT OFF AT: 5: 00 ENABLE SAVE TURN NIGHTLIGHT ON AT: 1 1 : 00 ENABLE SET NIGHTLIGHT ON SET NIGHTLIGHT OFF NIGHTLIGHT TIMER SAVE WHITEGREEN BLUERED RESERVOIR LIGHT SETTINGSLIGHTING HIGH ALTITUDE WATER FILTER REMINDER 2 OF 3 SAVE TURN BREWER OFF WHEN IDLE FOR: 0 : 15 ENABLE SETTINGSLANGUAGE CLOCK AUTO ON/OFF 1 OF 3 SAVE TURN BREWER ON AT: 7 : 00 ENABLE SAVE TURN BREWER OFF AT: 1 0 : 00 ENABLE AUTO ON/OFFAUTO ON AUTO OFF ENERGY SAVER SETTINGS MENUSECTION 2 ENABLE AUTO ON/OFF You can leave your brewer on at all times so it’s ready to make your perfect cup any time of day, or you can set the AUTO ON, AUTO OFF or ENERGY SAVER mode. Use the back button to return to the SETTINGS menu. Auto On: Select ENABLE to activate AUTO ON. Use the arrows to set the time for the brewer to automatically turn on. Press SAVE to confirm or use the back button to return to the SETTINGS menu. Auto Off: Select ENABLE to activate AUTO OFF. Use the arrows to set the time for the brewer to automatically turn off. Press SAVE to confirm or use the back button to return to the SETTINGS menu. Energy Saver: Select ENABLE to activate ENERGY SAVER mode. In increments of 15 minutes, set the brewer to turn off after a set length of time after the last brew. Press SAVE to confirm or use the back button to return to the SETTINGS menu. Select ENABLE to activate the NIGHTLIGHT TIMER. Use the arrows to set the time for the home screen to match the color of the WATER RESERVOIR LIGHT. Press SAVE to confirm or use the back button to return to the SETTINGS menu. APPLY LIGHTING Everything looks better in the right light. Choose the color of your WATER RESERVOIR LIGHT and engage NIGHTLIGHT TIMER to provide a warm glow in your kitchen at night. Use the back button to return to the SETTINGS menu. Water Reservoir Light: Choose white, green, blue or red. Press SAVE to confirm or use the back button to return to the SETTINGS menu. Nightlight Timer: Choose SET NIGHTLIGHT ON or SET NIGHTLIGHT OFF. Use the back button to return to the SETTINGS menu. back button back button
22 SAVE HIGH ALTITUDE ENABLE SETTINGSLIGHTING HIGH ALTITUDE WATER FILTER REMINDER 2 OF 3 SAVE WATER FILTER REMINDER ENABLE SETTINGSLIGHTING HIGH ALTITUDE WATER FILTER REMINDER 2 OF 3 YES NO RESTORE FACTORY SETTINGS ARE YOU SURE YOU WANT TO RESTORE SETTINGS TO FACTORY DEFAULTS? SETTINGS RESTORE FACTORY SETTINGS 3 OF 3 23 SETTINGS MENUSECTION 2 ENABLE WATER FILTER REMINDER If you are using a KeurigTM Water Filter, select ENABLE to activate the WATER FILTER REMINDER notices. Press SAVE to confirm or use the back button to return to the SETTINGS menu. Refer to page 28 for more information. ENABLE HIGH ALTITUDE To ensure your brewer works properly at higher altitudes (5,000 feet), ENABLE the HIGH ALTITUDE mode. Press SAVE to confirm or use the back button to return to the SETTINGS menu. RESTORE FACTORY SETTINGS Press YES to restore your brewer to the default settings. (Restoring defaults erases any saved FAVORITES, AUTO ON/OFF and LIGHTING. The clock will be set to 12:00 AM.) Press NO to return to the SETTINGS menu. CARING FOR YOUR BREWER CLEANING THE BREWER EXTERIOR Keep your Keurig ® 2.0 brewer looking its best by cleaning the exterior from time to time. Just clean with a damp, soapy, lint-free, non-abrasive cloth. Never immerse the brewer in water or other liquids. CLEANING THE DRIP TRAY The Drip Tray can accumulate up to 8 ounces of overflow. The Drip Tray and the Drip Tray Plate should occasionally be rinsed clean. To remove the Drip Tray, simply slide it toward you, keeping it level at all times to avoid spilling. Clean with a damp, soapy, lint-free, non-abrasive cloth. CLEANING THE WATER RESERVOIR AND THE FLIP-TOP RESERVOIR LID Clean the Water Reservoir and the Flip-Top Reservoir Lid with a damp, soapy, lint-free, non-abrasive cloth and rinse thoroughly. Do not dry the inside of the Water Reservoir with a cloth as lint may remain. Be sure to rinse the Water Reservoir thoroughly after cleaning to ensure that no cleaning solutions remain as they may contaminate the water supply in the brewer. DO NOT PLACE THESE ITEMS IN THE DISHWASHER. back button back button back button
2425 3. Pull out the Pack Holder Assembly (1) and Base (2). CLEANING THE PACK HOLDER 1. Lift the Handle. 2. Push up while grabbing the sides of the Pack Holder Assembly. Pull away from the brewer. CAUTION: Sharp needles. Do not put fingers in chamber. 4. Press the release buttons on both sides of the Pack Holder Assembly. Separate the Pack Holder from the Housing. 5. Clean the Pack Holder (1), Housing (2) and Base (3) with a damp, soapy, lint-free, non-abrasive cloth and rinse thoroughly. CLEANING THE EXIT NEEDLE 1. If a clog arises in the exit needle, push the lever of the Pack Holder to reveal the exit needle. 3. After all pieces are cleaned, place the Base, then the Pack Holder Assembly into the Brew Head. Lower the Handle. CAUTION: Sharp needles. Do not put fingers in chamber. 2. Use a paper clip or similar tool to loosen the clog. Rinse thoroughly with hot water. CARING FOR YOUR BREWERSECTION 2
27 26 CARING FOR YOUR BREWERSECTION 2 CLEANING THE KEURIGTM CARAFE 1. Carefully empty the KeurigTM Carafe. 2. Remove the lid. 4. Replace the lid. Ensure that the lid is securely in place prior to brewing your next carafe of coffee. 3. Wipe the inside of the Keurig TM Carafe and the lid with a damp, soapy, lint-free, non-abrasive cloth. Rinse thoroughly with hot water. The Keurig TM Carafe should not be placed in the dishwasher or submerged. KEURIG TM CARAFE OPERATION This unique KeurigTM Carafe was specifically designed for use with the Keurig® 2.0 brewer. To connect the KeurigTM Carafe to the brewer, make sure the KeurigTM Carafe is securely inserted into the brewer. The Keurig® 2.0 brewer contains a sensory system that determines when the KeurigTM Carafe is in place and it is safe to begin brewing. If the KeurigTM Carafe is not in place or incorrectly inserted, the brewing process will not begin. If the KeurigTM Carafe is removed during brewing, brewing will stop. CAUTION: Make sure the KeurigTM Carafe is empty before each use. CAUTION: After brewing, the KeurigTM Carafe will contain extremely hot liquid. Take care when pouring from the KeurigTM Carafe. Never place your hand over the KeurigTM Carafe where hot steam is venting. Never allow children to use the KeurigTM Carafe or operate the brewer without adult supervision. Press the Power Button to terminate the brew process. Follow the instructions on the Touchscreen before removing the Keurig TM Carafe. The brewer will return to the home screen. Remove and discard the used K-CarafeTM pack. CAUTION: There is extremely hot water in the Pack Holder during the brew process. To avoid risk of injury, do not lift the Handle during the brewing process. To maintain the ideal combination of taste, freshness and temperature, we recommend preheating the Keurig TM Carafe. To preheat the KeurigTM Carafe, fill it with hot water for approximately 30 seconds and then pour out entirely prior to placing the KeurigTM Carafe into the brewer. CAUTION: HAND WASH ONLY. DO NOT SUBMERGE. DO NOT MICROWAVE.
28 29 CONTINUE Time to replace the Water Filter! NOT NOWYES Water Filter Replaced? NOT NOW CONTINUE Time to descale the brewer! NOT NOWOK Descaling is good maintenance. Go to www.keurig.com for instructions. CANCEL SECTION 2MAINTENANCE ALERTS Your brewer is designed to deliver the perfect cup time after time, year after year. To keep it working at peak performance, your Keurig® 2.0 brewer will let you know when it needs a little attention. TIME TO REPLACE THE KEURIG TM WATER FILTER (VISIT KEURIG.COM TO PURCHASE) Your brewer will indicate “Time to replace the Water Filter!” after every 1,000 ounces or two months. Once you’ve replaced the Keurig TM Water Filter, press YES to re-set the WATER FILTER REMINDER notices. TIME TO DESCALE THE BREWER Depending on the mineral content of your water, calcium deposits or scale may build up in your brewer, this is why we recommend using bottled or filtered water. Scale is non-toxic but if left unattended can hinder brewer performance. Regularly descaling your brewer every three to six months helps maintain the heating element, and other internal parts that come in contact with water. Calcium deposits may build up faster, making it necessary to descale more often. You should promptly descale when the Touchscreen indicates “Time to descale the brewer!” However, even if this is not indicated, you should continue to descale your brewer every three to six months. DESCALING YOUR BREWER Before you begin, you will need a large mug, fresh water, Keurig TM Descaling Solution and access to a sink. Do not use a paper cup. • Empty the water from the Water Reservoir. If there is a Keurig TM Water Filter, remove and set aside. Disable AUTO OFF features, if necessary (refer to page 20). STEP 1: FIRST DESCALING SOLUTION RINSE • Press and hold the Power Button to power the brewer off. • Pour the entire bottle of Keurig TM Descaling Solution into the Water Reservoir. Then fill the empty bottle with water and pour into the Water Reservoir. Press and hold the Power Button to turn the brewer back on. • Place a large mug on the Drip Tray and run a cleansing brew by pressing and holding the Brew Button until 6 ounces of water has been dispensed. The brewer will automatically stop dispensing after 6 ounces. Do not use a Keurig ® brand pack. Pour the contents of the mug into the sink. STEP 2: SECOND DESCALING SOLUTION RINSE • Repeat the cleansing brew process until the Touchscreen indicates “More Water Please.” Let the brewer stand for at least 30 minutes while still on. • After 30 minutes, discard any residual solution and rinse the Water Reservoir thoroughly. STEP 3: FRESH WATER RINSE • Ensure the Water Reservoir is filled with fresh water to and not beyond the MAX FILL line. • Place a large mug on the Drip Tray and run a cleansing brew. Pour the contents of the mug into the sink. • Repeat the cleansing brew process at least 12 times. You may need to refill the Water Reservoir at least one time during this process. NOTE: If “Time to descale the brewer!” is still indicated after completing the procedure, repeat the descaling procedure above.
30 31 5 MAINTENANCE ALERTSRECYCLING K-CARAFETM PAC K S DESCALING YOUR BREWER (CONTINUED) The cleaning action of Keurig TM Descaling Solution may result in a foam dispensed from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is heavily scaled, the brewer may not fill properly after the descaler is added. If this occurs, you may see only a small or no output dispensed followed by the sound of air blowing out. If this occurs: • Turn off and unplug the brewer. • If there is Keurig TM Descaling Solution in the Water Reservoir, discard the contents, rinse the Water Reservoir thoroughly and refill with bottled or filtered water. • Plug the brewer back in, power on, and repeat STEP 3: FRESH WATER RINSE (refer to page 29). The brewer should begin to function normally as the solution is rinsed out and the scale is removed. If the problem persists, allow the brewer to sit unplugged for at least 30 minutes, then continue with the fresh water rinse. Scan this QR code with your smartphone for step-by-step videos on cleaning, descaling and more. Or if you prefer, you can watch the videos online at Keurig.com. The plastic cups of K-Carafe TM packs can be recycled wherever #5 plastic is accepted. #5 plastic may not be recyclable in your community today, so please check locally with your municipality or waste hauler, or visit Keurigrecycling.com for more information. 1. Once brewing is complete, lift the Handle and carefully remove the K-Carafe TM pack by holding the outer rim. CAUTION: The K-CarafeTM pack will be hot after brewing. Use caution when removing. Allow it to cool completely before handling. 3. Once separated, discard the lid and the attached filter. Recycle your K-CarafeTM pack’s plastic cup wherever #5 plastic is accepted. 2. Once cool, separate the lid and filter from the cup. The filter will adhere to the lid. SECTION 2
32 33 BREWER SHUTS OFF OR TURNS ON AUTOMATICALLY • Check to make sure that the AUTO ON/OFF settings have not been set (refer to page 20). • The water level is low and a full cup cannot be brewed. Add water to the Water Reservoir. THE TOUCHSCREEN INDICATES “MORE WATER PLEASE.” • If the water level is not low, remove the Water Reservoir and empty the water. Then thoroughly clean (refer to page 23). Fill the Water Reservoir to the MAX FILL line, return it to the brewer and ensure it is seated properly in its base. THE TIME IS NOT DISPLAYED ON THE TOUCHSCREEN • If power is interrupted to the brewer by unplugging it, or if power is lost, follow the procedure on page 19 to set the CLOCK. THE K-CUP ® PACK HAS A KEURIG® LOGO, BUT TOUCHSCREEN INDICATES “OOPS!” • Your Keurig ® 2.0 brewer will not work with packs that don’t have the Keurig® logo on them. Some Keurig® brand packs produced prior to January 2014 may not be enabled to work with the Keurig® 2.0 brewer. Please contact Customer Service at 1.866.901.BREW (2739) for a solution. STILL HAVING TROUBLE? VISIT KEURIG.COM FOR MORE INFORMATION. BREWER DOES NOT HAVE POWER • Plug the brewer into an independent outlet without dimmer control. • Check to be sure that the brewer is plugged in securely. • Plug the brewer into a different outlet. • Reset your home’s circuit breaker if necessary. • Press and hold the Power Button and ensure the Touchscreen is illuminated. BREWER WILL NOT BREW • After placing a pack in the Pack Holder, make sure the Handle is lowered completely and the Touchscreen displays the appropriate brew screen. Follow the brewing instructions in SECTION 1 (refer to pages 10 – 11). • If the Touchscreen indicates “More Water Please.” add water to the Water Reservoir or make sure the Water Reservoir is seated properly in its base. • If the Touchscreen indicates “More Water Please.” even after refilling, remove the Water Reservoir and empty the water. Then thoroughly clean (refer to page 23). Fill the Water Reservoir to the MAX FILL line, return it to the brewer and ensure it is seated properly in its base. • The Pack Holder may need to be cleaned (refer to pages 24 – 25) or the brewer may need to be descaled (refer to pages 28 – 30). • If you have completed the above procedure two times and this situation persists, contact Customer Service at 1.866.901.BREW (2739). BREWER BREWS ONLY A PARTIAL CUP • Clean the Pack Holder if necessary (refer to pages 24 – 25). • The Water Reservoir may have been removed during brewing. Replace the Water Reservoir and perform a cleansing brew (refer to page 9) without a pack. • Descale the brewer (refer to pages 28 – 30). • If you have repeated the descale procedure on your brewer two times and it is still only brewing a partial cup, contact Customer Service at 1.866.901.BREW (2739). TROUBLESHOOTINGSECTION 3
34 35 WARRANTYSECTION 4 LIMITED ONE YEAR WARRANTY Keurig warrants that your brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you fill out and return the warranty card enclosed with your brewer so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace a defective brewer without charge upon its receipt of proof of the date of purchase. If a replacement brewer is necessary to service this warranty, the replacement brewer may be new or reconditioned. If a replacement brewer is sent, a new limited one year warranty will be applied to the replacement brewer. This warranty only applies to brewers operated in the United States and Canada. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and, in the case of Canada, from province to province. The Keurig ® 2.0 brewer is designed to only work with Keurig® brand packs. Any damage to or malfunction of your brewer resulting from the use of non-Keurig® brand packs and accessories may not be covered by this warranty or may result in a service fee if the damage or malfunction is determined to be caused by such use. WHAT IS NOT COVERED BY THE LIMITED WARRANTY? THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND DOES NOT COVER INCIDENTAL COSTS AND EXPENSES RESULTING FROM ANY BREACH OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you depending on the state or province of purchase. Nor does this warranty cover damages caused by use of non-Keurig ® brand packs or accessories, services performed by anyone other than Keurig or its authorized service providers, use of parts other than genuine Keurig parts, or external causes such as abuse, misuse, inappropriate power supply or acts of God. OTHER LIMITATIONS THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO YOUR K2.0-500 BREWER, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states or provinces do not allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you depending on the state or the province of purchase. HOW DO YOU OBTAIN WARRANTY SERVICE? Keurig ® brewers are high-quality appliances and, with proper care, are intended to provide years of satisfying performance. However, should the need arise for warranty servicing, simply call Keurig Customer Service at our toll free phone number 1.866.901.BREW (2739). Please do not return your brewer for servicing without first speaking to Keurig Customer Service to obtain an Authorization to Return number (ATR). Keurig ® brewers returned without an ATR number will be returned to the sender without servicing. Keurig, Incorporated 33 Coffee Lane Waterbury, VT 05676 1.866.901.BREW (2739)
38 39 Lorsque vous utilisez des appareils électriques, vous devriez suivre certaines mesures de sécurité, notamment les suivantes : 1. Lire toutes les instructions avant l’utilisation. 2. Ne pas toucher les surfaces chaudes. Utiliser les poignées s’il y en a. 3. Installer correctement l’appareil et le placer dans un endroit conforme aux présentes instructions avant de l’utiliser. 4. L’utilisation d’accessoires non recommandés par le fabricant de l’appareil risque de causer un incendie, une décharge électrique ou des blessures. 5. Ne pas placer l’appareil sur un élément électrique ou un brûleur à gaz, ni à proximité. Ne pas placer dans un four chaud. 6. Ne pas utiliser l’appareil à l’extérieur. 7. Pour éviter les risques d’incendie, de décharge électrique ou de blessures, ne pas immerger la fiche, le cordon d’alimentation ou l’appareil dans l’eau ni dans aucun autre liquide. 8. Ne pas dépasser la marque de niveau plein (MAX). 9. Utiliser seulement de l’eau dans cet appareil! Ne verser aucun autre liquide ou aliment dans le réservoir d’eau, à l’exception des produits mentionnés dans les instructions de nettoyage du présent manuel. 10. Éteindre et débrancher l’appareil avant de le nettoyer ou d’en faire l’entretien. Laisser l’appareil refroidir avant d’ajouter ou d’enlever des pièces et avant de le nettoyer. 11. Pour un fonctionnement optimal, brancher l’appareil dans une prise de courant séparée sur un circuit dédié pour éviter que les lumières vacillent, que les fusibles sautent ou que les disjoncteurs se déclenchent. 12. Ne jamais utiliser un appareil dont la fiche ou le cordon d’alimentation est endommagé ou un appareil qui présente un trouble de fonctionnement ou qui a été endommagé de quelque façon que ce soit. Communiquer avec le Service à la clientèle de Keurig pour signaler tout mauvais fonctionnement du système d’infusion ou tout dommage à celui-ci. 13. Ne pas laisser le cordon d’alimentation pendre d’une table ou d’un comptoir ni entrer en contact avec une surface chaude. 14. Pour débrancher le système d’infusion, appuyer d’abord sur le bouton de mise en marche pour éteindre l’appareil, puis retirer le cordon de la prise. 15. Ne jamais laisser des enfants utiliser le système d’infusion, ni rester à proximité sans surveillance. 16. Ne pas soulever la poignée du système d’infusion pendant une infusion. 1 7. Toujours laisser le couvercle sur le réservoir d’eau, sauf lors du remplissage. 18. L’appareil est équipé d’un cordon d’alimentation muni d’un conducteur et d’une fiche de mise à la terre. L’appareil doit être mis à la terre en branchant la fiche dans une prise de courant à contact de mise à la terre à trois trous. En cas de court-circuit, la mise à la terre réduit les risques de décharge électrique. 19. Si la prise de courant est une prise de courant murale standard à deux trous, le propriétaire a l’obligation et la responsabilité de la faire remplacer par une prise de courant à contact de mise à la terre à trois trous. 20. Il ne faut en aucun cas couper ou enlever la troisième broche (mise à la terre) de la fiche du cordon d’alimentation, ni utiliser un adaptateur. 21. Consulter un électricien qualifié si les instructions sur la mise à la terre ne sont pas parfaitement comprises ou en cas de doutes sur la mise à la terre de l’appareil. 22. Ne pas utiliser l’appareil pour une fin autre que celle pour laquelle il a été conçu. 23. Retirer le disque de protection avant l’infusion. RÈGLES DE SÉCURITÉ IMPORTANTES AVERTISSEMENT AUX UTILISATEURS ET AUX PARENTS : 1. NE permettez PA S aux enfants d’utiliser l’appareil sans la supervision d’un adulte. L’appareil distribue de l’eau très chaude. 2. AVIS SPÉCIAL AUX UTILISATEURS DE CHOCOLAT CHAUD/AUTRES BOISSONS : APRÈS L’UTILISATION D’UNE DOSETTE DE CHOCOLAT CHAUD/ AUTRE, LANCEZ IMMÉDIATEMENT UN CYCLE D’INFUSION D’EAU CHAUDE sans dosette pour éviter une possible obstruction de l’aiguille de sortie. NE tenez PA S pour acquis que le prochain utilisateur le fera. VEUILLEZ CONSERVER CE MANUEL. AVERTISSEMENT ! RISQUE D’INCENDIE ET DE DÉCHARGE ÉLECTRIQUE NE PAS OUVRIR AVERTISSEMENT : POUR RÉDUIRE LES RISQUES D’INCENDIE ET DE DÉCHARGE ÉLECTRIQUE, NE PAS RETIRER LA PARTIE INFÉRIEURE DU BOÎTIER. CET APPAREIL NE CONTIENT AUCUNE PIÈCE RÉPARABLE PAR L’UTILISATEUR. LES RÉPARATIONS DOIVENT ÊTRE EFFECTUÉES UNIQUEMENT PAR UN FOURNISSEUR DE SERVICE AUTORISÉ.