JVC Tm A210g Instructions

9
DISPLAY AND SELECTIONS IN THE  MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION• CONTROL LOCK• INPUT REMOTE
• WHITE BALANCE• STATUS DISPLAY• ASPECT REMOTE
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The  screen is displayed.
* The screen automatically disappears when no operation
is performed after about 5 minutes.
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (3) is put next to the selected item.
3....

10
Set-up menu items Purpose Settings
H. POSITION Adjusts the horizontal position of
the screen (+ : Horizontal position
shifts to the right/–: Horizontal
position shifts to the left)
WHITE BALANCE Adjusts the white balance Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
DRIVE R.DRIVE Adjusts red level
B.DRIVE Adjusts blue level
CUT OFF R. CUT OFF Adjusts red cut off
G. CUT OFF Adjusts green cut off
B. CUT OFF Adjusts blue cut off
CONTROL LOCK...

11
Functions (Items)Initialization(setting)
SHARPNESS +03
COLOR SYSTEMAU TO
ASPECT RATIO 4–3
COLOR TEMP. 6500
H. POSITION 00
WHITE BALANCE
         R. CUT OFF 00
G. CUT OFF 00
B. CUT OFF 00
R. DRIVE 00
B. DRIVE 00
CONTROL LOCK OFF
STATUS DISPLAY ON
INPUT REMOTE OFF
ASPECT REMOTE OFF
PHASE 00
CHROMA 00
CONTRAST 00
BRIGHT 00
VOLUME 
20
 RESET
             Are   you     sure ?
“Ye s”  then   
“No”  then   
Sorts
 screen
 screen
Picture adjustment
Volume
HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND...

12
BASIC CONNECTION EXAMPLE
                   External control switch
Open circuit Closed circuit
(open) (short)
INPUTINPUT A INPUT B
Notes:
•
 Before connecting your system, make sure that all units are turned off.• The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected.
Be sure to refer to the instructions provided with the unit(s) you are connecting.
• Each pair of input (IN) and output (OUT) terminals are...

13
 : Signal Flow
7VIDEO B (Y/C) Connection Example (Select Input B (Y/C))
Y/C (S-video) 
(Y/C (S-video) signal cable)
Audio 
(Audio signal cable)
Audio 
(Audio signal cable)
ENGLISH
Video Camera
Video Monitor
VCRVideo MonitorVCR
Y/C (S-video) 
(Y/C (S-video) signal cable)
EN_TM_A210GE_f.p6503.8.28, 7:03 PM 13
 

14
Problems
No power supply.
No picture with the
power on.
No sound.
Shaking picture.
No colors, wrong
color, or dark picture.
Unnatural, irregularly
colored, or distorted
picture.
Dark stripes appear
at the top and bottom
of the screen, picture
vertically squeezed.
Function buttons on
the front panel do not
function.
The INPUT SELECT
buttons do not
function.
Points to be checked
Is the power plug loosened or disconnected?
Is the video signal output from the connected
component?
Is the input signal...

15
SPECIFICATIONS
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* E. & O. E.  Design and specifications subject to change without notice.
MODEL TM-A210G
TypeColor video monitor
Colour systemPAL, NTSC (3.58)
Picture tube54 cm measured diagonally,
flat-square type,
90° deflection, in-line gun,
vertical line trio type
(phosphor stripe pitch H/V: 0.63/0.64 mm)
Effective screen sizeWidth...

7Dimensions
< Front View >< Side View >
* Asterisks (*) are used to indicate front panel
dimensions.
Unit : mm (inch)
7Y/C  (Mini DIN 4 pin) terminal
specification
  Pin No.                Signal
1 GND (Y)
2 GND (C)
3Y
4C
476 (18-3/4)
492 (19-3/8)
479 (18-7/8)
416.4 (16-1/2)
382.8 (15-1/8)
20 (   7/8)
314.8 (12-1/2)
407.5 (16-1/8) 213.5 (8-1/2)
*
*
PHASE BRIGHTMENUCHROMA CONTRASTVOLUME/SELECT
INPUT SELECT AB
POWERON
OFF
 105 (4-1/4)  135 (5-3/8) 1.5 (1/16)
3.5 (1/4)
128.5 (5-1/8) 3 (1/8)
VICTOR COMPANY...

DEUTSCH
BEDIENUNGSANLEITUNG
FARB-VIDEO-MONITOR
TM-A210G
Vielen Dank für den Kauf dieses Farb-Monitors von JVC. Bitte lesen Sie diese
Bedienungsanleitung vor Ingebrauchnahme sorgfältig durch, um einen einwandfreien
Betrieb sicherzustellen.
GE_TM-A210G_f.p6503.8.28, 7:04 PM 19
 

Zur Vermeidung von Unfällen (mit Todesgefahr), die durch
unsachgemäße Handhabung und Bedienung des Monitors
verursacht werden können, unbedingt die folgenden
Sicherheitshinweise beachten!
ACHTUNG
Zur Vermeidung von Kurzschlüssen und Brandgefahr
dieses Gerät vor Nässe und Feuchtigkeit schützen!
Gefährliche Spannung im Geräteinneren. Nicht die
hintere Gehäuseverkleidung abnehmen.
Bei Betriebsstörungen wenden Sie sich bitte an Ihre
Kundendienststelle. Führen Sie niemals
Reparaturmaßnahmen durch!...