JVC R S11 Manual

3
  ENGLISH   ESPAÑOL   FRANÇAIS
Set “L/O MODE” to “REAR” (See page 24 of the INSTRUCTIONS.)
Ajuste “L/O MODE” a “REAR” (Consulte la página 24 del MANUAL 
DE INSTRUCCIONES.)
Réglez “L/O MODE” sur “REAR” (Voir page 24 du MANUEL 
D’INSTRUCTIONS.)
B  Connecting the external amplifiers or subwoofer / Conexión de los amplificadores o subwoofer externos / Connexion d’amplificateurs 
extérieurs ou d’un caisson de grave
You can connect amplifiers to upgrade your car stereo system.
•  Connect the remote lead...

4
Cuando conecte componentes externos, consulte, también, los 
manuales suministrados con los componentes y el adaptador.
PRECAUCION:  Antes de conectar los componentes externos, asegúrese de que la 
unidad esté apagada.
Puede conectar los siguientes componentes JVC al jack del cambiador 
de CD.
Componente JVCNombre del 
modelo
Cambiador de CD (CD-CH) CH-X1500, etc.
Sintonizador HD Radio 
TMKT-HD300
También puede conectar los siguientes componentes mediante los 
diversos adaptadores JVC.
•  Puede ser...

ENGLISH
FRANÇAIS
CD RECEIVER
RÉCEPTEUR CD
KD-BT11
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
GET0508-003A[EX/EU]
  For canceling the display demonstration, see page 4.
  Pour annuler la démonstration des affichages, référez-vous à la page 4.
Cover_KD-BT11_003A_6.indd   1Cover_KD-BT11_003A_6.indd   112/13/07   2:34:07 PM12/13/07   2:34:07 PM 

G-1
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
  0984
English: Español:
Hereby, JVC, declares that this 
KD-BT11 is in compliance with the 
essential requirements and other 
relevant provisions of Directive 1999/5/
EC.Por medio de la presente JVC declara 
que el KD-BT11 cumple con los 
requisitos esenciales y cualesquiera 
otras disposiciones aplicables o 
exigibles de la Directiva 1999/5/CE
Deutsch: Ελληνική:
Hiermit erklärt JVC, dass sich das Gerät 
KD-BT11 in...

G-2
Svenska: Lietuviu:
Härmed intygar JVC att denna 
KD-BT11 står I överensstämmelse 
med de väsentliga egenskapskrav och 
övriga relevanta bestämmelser som 
framgår av direktiv 1999/5/EG.Šiuo JVC deklaruoja, kad šis KD-BT11 
atitinka esminius reikalavimus ir kitas 
1999/5/EB Direktyvos nuostatas.
Íslenska: Magyar:
Hér með lýsir JVC yfir því að KD-BT11 
er í samræmi við grunnkröfur og aðrar 
kröfur, sem gerðar eru í tilskipun 
1999/5/EC.Alulírott, JVC nyilatkozom, hogy a 
KD-BT11 megfelel a vonatkozó...

ENGLISH
2
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best 
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1.  CLASS 1 LASER PRODUCT
2.  CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to 
qualified service personnel.
3.  CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with...

ENGLISH
3
  How to reset your unit
• Your preset adjustments will also be erased (except the 
registered Bluetooth device, see pages 10 and 11).
  How to forcibly eject a disc
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
  How to use the M MODE button
If you press M MODE, the unit goes into functions mode, 
then the number buttons and 
5/∞ buttons will work 
as different function buttons.
Ex.:  When number button 2 works as MO (monaural) 
button.
To use...

ENGLISH
4INTRODUCTIONS
Preparation
  Cancel the display demonstration and set the clock
•  See also pages 24 and 25.
1Turn on the power.
2Enter the PSM settings.
3Cancel the display demonstrations
  Select “DEMO,” then “DEMO OFF.”
Set the clock
  Select “CLOCK HOUR,” then adjust the hour.
  Select “CLOCK MIN” (minute), then adjust the minute.
  Select “24H/12H,” then “24 HOUR” or “12 HOUR.”
4Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on:...

ENGLISH
5 OPERATIONS
Basic operations
Using the control panel 
r  •  Adjust the sound mode.
  •  Enter the PSM settings [Hold].
t  •  Enter functions mode.
    Press M MODE, then one of the following buttons 
(within 5 seconds)...
 EQ  :  Select the sound mode.
 MO  :  Turn on/off monaural reception.
 SSM  :  Automatic station presetting [Hold].
 RPT  :  Select repeat play.
 RND  :  Select random play.
 
5/∞ :  Skip 10 tracks.
  •  Activate Voice Dialing [Hold].
y • FM/AM: Select preset station.
 • DAB:...

ENGLISH
6
Display window
1  Status of Bluetooth device
  (Device number, [1 – 5]; signal strength, [0 – 3]*; 
battery reminder, [0 – 3]*)
 * As the number increases, the signal/battery power 
becomes stronger.
2  Tr (track) indicator
3  Source display / Track number / Folder number / 
Time countdown indicator
4  Bluetooth indicator
5  RDS indicators—AF, REG, TP, PTY
6  Playback mode / item indicators— RND (random), 
 (disc),  (folder), RPT (repeat)
7  Tuner reception indicators—ST (stereo), 
MO...