JVC R S11 Manual

ENGLISH
5 OPERATIONS
Basic operations
Using the control panel 
r  •  Adjust the sound mode.
  •  Enter the PSM settings [Hold].
t  •  Enter functions mode.
    Press M MODE, then one of the following buttons 
(within 5 seconds)...
 EQ  :  Select the sound mode.
 MO  :  Turn on/off monaural reception.
 SSM  :  Automatic station presetting [Hold].
 RPT  :  Select repeat play.
 RND  :  Select random play.
 
5/∞ :  Skip 10 tracks.
  •  Activate Voice Dialing [Hold].
y • FM/AM: Select preset station.
 • DAB:...

ENGLISH
6
Display window
1  Status of Bluetooth device
  (Device number, [1 – 5]; signal strength, [0 – 3]*; 
battery reminder, [0 – 3]*)
 * As the number increases, the signal/battery power 
becomes stronger.
2  Tr (track) indicator
3  Source display / Track number / Folder number / 
Time countdown indicator
4  Bluetooth indicator
5  RDS indicators—AF, REG, TP, PTY
6  Playback mode / item indicators— RND (random), 
 (disc),  (folder), RPT (repeat)
7  Tuner reception indicators—ST (stereo), 
MO...

ENGLISH
7 OPERATIONS
To listen to a preset station
The following features are available only for FM RDS 
stations.
  Searching for FM RDS programme 
— PTY Search
You can tune in to a station broadcasting your favorite 
programme by searching for a PTY code.
•  To store your favorite programme types, see page 8.
1  The last selected PTY code 
appears.
2  Select one of your favorite programme types.
 or
 Select one of the PTY codes (see page 9).
3  Start searching for your favorite programme.
  If there is...

ENGLISH
8
  Storing your favorite programme 
types
You can store six favorite programme types.
Preset programme types in the number buttons 
(1 to 6):
1  Select a PTY code (see page 7).
2  Select the preset number (1 – 6) you want to 
store into.
3  Repeat steps 1 and 2 to store other PTY codes 
into other preset numbers.
4  Finish the procedure.
  Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch 
temporarily to Traffic Announcement (TA) from any 
source...

ENGLISH
9OPERATIONS
  Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not 
sufficient enough, this unit automatically tunes in to 
another FM RDS station of the same network, possibly 
broadcasting the same programme with stronger 
signals (see the illustration below).
When shipped from the factory, Network-Tracking 
Reception is activated.
To change the Network-Tracking Reception 
setting, see “AF-REG” on page 25.
Programme A broadcasting on different...

ENGLISH
10
Using the Bluetooth ® devices
Bluetooth is a short-range wireless radio 
communication technology for the mobile device such 
as mobile phones, portable PCs, and other devices. The 
Bluetooth devices can be connected without cables and 
communicate with each other.
•  Refer to the list (included in the box) to see the 
countries where you may use the Bluetooth® 
function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
  HFP (Hands-Free Profile) 1.5
  OPP (Object Push...

ENGLISH
11OPERATIONS
  Connecting a Bluetooth device for 
the first time
Pairing and PIN code
When you connect a Bluetooth device to the unit 
for the first time, make pairing between the unit 
and the device. Pairing allows Bluetooth devices to 
communicate with each other.
To make pairing, you may need to enter the PIN 
(Personal Identification Number) code of your Bluetooth 
device you want to connect.
•  Once the connection is established, it is registered in 
the unit even if you reset the unit. Up...

ENGLISH
12
Connecting a registered device (PHONE/
AUDIO)
Perform steps 1 and 2 on page 11, then...
1 Select “CNNCT PHONE” or “CNNCT AUDIO.”
2 Select a device you want.
  “CONNECTING” flashes, then “CONNECTED” appears 
on the display when the device is connected.
You can set the unit to connect the Bluetooth device 
automatically when the unit is turned on. (See 
“AUTO CNNCT” on page 27.)
Disconnecting a device (PHONE/AUDIO)
Perform steps 1 and 2 on page 11, then...
Select “DISCN PHONE” or “DISCN AUDIO.”...

ENGLISH
13OPERATIONS
When a call comes in....
The source is automatically changed to “BLUETOOTH,” 
then “RCV CALL” (receive call) and the phone number 
appear alternately.
When “AUTO ANSWER” is activated....
The unit answers the incoming calls automatically, see 
page 27.
•  When “AUTO ANSWER” is deactivated, press any 
button (except 
 and 0) to answer the 
incoming call.
•  You can adjust the microphone volume level (see 
page 27).
To end the call
Hold any button (except 
 and 0).
Answering a waiting...

ENGLISH
14
How to enter phone number
1 Select a number.
2 Move the entry position.
3 Repeat steps 1 and 2 until you finish 
entering the number.
4 Confirm the entry.
To delete the phone numbers
•  Make sure that the Bluetooth phone is connected.
1 Display the phone number you want to 
delete by using one of the “CALL” items.
2 Select the phone number (or name).
3 Select “DELETE” or “DELETE ALL.”
  DELETE:  Deletes the selected phone number.
  DELETE ALL:  Deletes the phone number listed in 
step 
1.
  •...