JVC R S11 Manual

ENGLISH
35REFERENCES
Specifications
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Front/Rear: 50 W per channel
Continuous Power Output (RMS):
Front/Rear: 19 W per channel into 
4 Ω, 40 Hz to 20 000 Hz at 
no more than 0.8% total 
harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass: ±12 dB (60 Hz, 80 Hz, 
100 Hz, 200 Hz)
Mid-range: ±12 dB (500 Hz, 1.0 kHz, 
1.5 kHz, 2.5 kHz)
Treble: ±12 dB (10.0 kHz, 12.5 kHz, 
15.0 kHz, 17.5 kHz)
Q: Bass: Q1.0, Q1.25, Q1.5, Q2.0...

EN, GE, RU1207DTSMDTJEIN
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Haben Sie PROBLEME mit dem Betrieb?
Bitte setzen Sie Ihr Gerät zurück
Siehe Seite Zurücksetzen des Geräts
Затруднения при эксплуатации?
Пожалуйста, перезагрузите Ваше устройство
Для получения информации о перезагрузке Вашего устройства обратитесь на 
соответствующую страницу
© 2007 Victor Company of Japan, Limited
Dear Customer,
This apparatus is in conformance with the valid European...

1
KD-BT11
Installation/Connection Manual
Einbau/Anschlußanleitung
Руководство по установке/подключению
  ENGLISH
This unit is designed to operate on 12 V DC, NEGATIVE ground 
electrical systems. If your vehicle does not have this system, a 
voltage inverter is required, which can be purchased at JVC IN-CAR 
ENTERTAINMENT dealers.
WARNINGS
To prevent short circuits, we recommend that you disconnect the 
battery’s negative terminal and make all electrical connections before 
installing the unit.
•  Be sure...

2
Do the required electrical connections.Nehmen Sie die erforderlichen elektrischen Anschlüsse vor.
Выполните необходимые подключения контактов, как 
показано на оборотной стороне этой инструкции.
Bend the appropriate tabs to hold the sleeve 
firmly in place.
Die geeigneten Zapfen biegen, um die Manschette 
sicher festzuhalten.
Отогните соответствующие фиксаторы, 
предназначенные для прочной установки 
корпуса.
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. If...

3
  ENGLISH
ELECTRICAL CONNECTIONS
B
Before connecting: Check the wiring in the vehicle carefully. 
Incorrect connection may cause serious damage to this unit.
The leads of the power cord and those of the connector from the car 
body may be different in color.
1  Cut the ISO connector.2  Connect the colored leads of the power cord in the order 
specified in the illustration below.
3  Connect the aerial cord.4  Finally connect the wiring harness to the unit.
  Connections without using the ISO connector /...

4
  Connecting the external components / Anschließen der externen Komponenten / Подключение внешних устройствE
When connecting the external components, refer also to the 
manuals supplied for the components and adapter.
CAUTION:  Before connecting the external components, make sure that the 
unit is turned off.
You can connect the following JVC components to the CD changer 
jack.
JVC component Model name
CD changer (CD-CH) CH-X1500, etc.
JVC DAB tuner KT-DB1000
You can also connect the following...

ENGLISH
РУCCKИЙ
УКРАЇНА
CD RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
ПРИЙМАЧ З ПРОГРАВАЧЕМ КОМПАКТ-ДИСКІВ
KD-BT11
For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
Вказівки по встановленню та виконанню підключень наведені у окремій інструкції.
INSTRUCTIONS
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
ІНСТРУКЦІЇ
GET0509-001A[EE]
  For canceling the display demonstration, see page 4.
  Информацию об отмене демонстрации...

ENGLISH
2
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best 
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1.  CLASS 1 LASER PRODUCT
2.  CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to 
qualified service personnel.
3.  CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with...

ENGLISH
3
  How to reset your unit
• Your preset adjustments will also be erased (except the 
registered Bluetooth device, see pages 10 and 11).
  How to forcibly eject a disc
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
  How to use the M MODE button
If you press M MODE, the unit goes into functions mode, 
then the number buttons and 
5/∞ buttons will work 
as different function buttons.
Ex.:  When number button 2 works as MO (monaural) 
button.
To use...

ENGLISH
4INTRODUCTIONS
Preparation
  Cancel the display demonstration and set the clock
•  See also page 20.
1Turn on the power.
2Enter the PSM settings.
3Cancel the display demonstrations
  Select “DEMO,” then “DEMO OFF.”
Set the clock
  Select “CLOCK HOUR,” then adjust the hour.
  Select “CLOCK MIN” (minute), then adjust the minute.
  Select “24H/12H,” then “24 HOUR” or “12 HOUR.”
4Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the...