JVC Lt Z32s2 Instructions

							19
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
PICTURE FEATURES
Refer to “Using the TV’s menu” (see page 17) for details of 
displaying the menu.
DIGITAL VNR
The DIGITAL VNR function cuts down the amount of 
noise in the original picture.
You can choose from the three DIGITAL VNR function 
settings of AUTO, MIN and MAX.
AUTO:
The TV will automatically adjust the level of the DIGITAL 
VNR effect to match the amount of noise in the picture, 
giving you the best possible picture.
• If you set the DIGITAL VNR effect too high it can make 
the picture less sharp. It is recommended to use the 
AUTO setting if you can.
• AUTO cannot be chosen when you are watching the 
VIDEO-4 picture.
MIN:
The level of the DIGITAL VNR effect is set to the 
minimum. If you set the DIGITAL VNR function to AUTO 
but feel that the sharpness of the original picture has not 
been reproduced fully, change the setting from AUTO to 
MIN.
• The MIN setting is not suitable for low-quality pictures 
which contain a lot of noise.
MAX:
The level of the DIGITAL VNR effect is set to the 
maximum. If you set the DIGITAL VNR function to AUTO 
but still notice some noise, change the setting from AUTO 
to MAX.
• The MAX setting is not suitable for high-quality pictures 
which contain very little noise.
• When a picture of 625p, 525p, or 1125i signal is being 
displayed, the AUTO setting cannot be chosen with the 
DIGITAL VNR function.
• See “VIDEO-4 terminal” on page 34 for more 
information on this type of signal.
Super DigiPure
The Super DigiPure function uses the latest in digital 
technology to give you a natural-looking picture. The Super 
DigiPure function includes the following two functions.
DigiPure function:
This function helps to create a natural-looking picture by 
eliminating unnecessary edges from high-contrast and crisp 
images. For images with low-contrast, edges are added to 
produce a sharper, more detailed picture.
You can choose from the three DigiPure function settings of 
AUTO, MIN and MAX.
• If you set the DigiPure effect too high on a low-quality 
picture that contains a lot of noise, this may actually 
make the noise worse. We recommend you use the 
AUTO setting if you can.
Picture motion compensation function:
This function displays fast-moving pictures (for example, 
the players or ball in a football game) more smoothly and 
naturally on the screen.
• The effect level of the picture motion compensation 
function cannot be changed. The effect level is the same 
no matter which of the AUTO, MIN or MAX settings is 
used.
1 Choose Super DigiPure
2Press the 5
55 5 buttons to choose a setting. 
Then press the a
aa a button
AUTO:
The TV will automatically adjust the level of the DigiPure 
effect to match the amount of noise in the picture, giving the 
best possible picture.
• AUTO cannot be chosen when you are watching the 
VIDEO-4 picture.
MIN:
The level of DigiPure effect is set to the minimum. When 
you set the Super DigiPure function to AUTO and notice 
some noise, change the setting from AUTO to MIN.
• The MIN setting is not suitable for high-quality pictures 
which contain very little noise.
MAX:
The level of DigiPure effect is set to the maximum. If you 
set the Super DigiPure function to AUTO but feel that the 
original picture quality has not been reproduced fully, 
change the setting from AUTO to MAX.
• The MAX setting is not suitable for low-quality pictures 
which contain a lot of noise.
OFF:
The Super DigiPure function is turned off.
D1015-EN
DIGITAL VNR
Super DigiPure
COLOUR SYSTEM
PULL DOWN
4:3 AUTO ASPECT
COLOUR MANAGEMENT
PIPAUTO
AUTO
BACK
PICTURE FEATURES
TV
OK
AUTO
ON
LT-Z32&26S2_Eng.book  Page 19  Thursday, December 18, 2003  10:11 AM
 
						

							PICTURE FEATURES
20
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
COLOUR SYSTEM
The colour system is chosen automatically. However, if the 
picture is not clear or no colour appears, choose the colour 
system manually.
1 Choose COLOUR SYSTEM. Then press the a
aa a 
button
The sub-menu of the COLOUR SYSTEM function 
appears.
2 Press the 5
55 5 buttons to choose MAIN or SUB
MAIN:
You can change the colour system of the main-picture.
SUB:
You can change the colour system of the sub-picture.
• Choose MAIN when a sub-picture is not displayed.
3 Press the 6
66 6 buttons to choose the 
appropriate colour system. Then press the a
aa a 
button
AUTO:
This function detects a colour system from the input 
signal. You can only use this when you are viewing a 
picture from programme number PR 0 (AV), or a 
VIDEO terminal.
Refer to the following table for the various international 
colour systems.
Colour system
• The AUTO function may not function properly if you 
have poor signal quality. If the picture is abnormal in the 
AUTO function, choose another colour system 
manually.
• When in the Programme numbers PR 0 (AV) to PR 99, 
you cannot choose NTSC 3.58 or NTSC 4.43.
PULL DOWN
The PULL DOWN function displays a cinema film picture 
more smoothly and naturally on the screen.
AUTO:
The television automatically recognizes the type of signal 
and turns the function on and off.
ON:
This function is turned on.
OFF:
This function is turned off.
• The motion may appear unnatural when viewing images 
with the NTSC colour system. When the PULL DOWN 
function is set to AUTO or ON, the motion may appear 
unnatural when viewing images with the NTSC colour 
system.
• You cannot select this function in the twin pictures mode 
or the picture in picture mode.
4:3 AUTO ASPECT
You can choose one of three ZOOM modes, REGULAR, 
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the 
normal picture (4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then press the a
aa a 
button
2Press the 6
66 6 buttons to choose a ZOOM mode. 
Then press the a
aa a button
COLOUR MANAGEMENT
This TV supports the COLOUR MANAGEMENT function 
to ensure dull colours are compensated to produce natural 
hues.
The COLOUR MANAGEMENT function is on by default.
ON:
COLOUR MANAGEMENT function is turned on.
OFF:
COLOUR MANAGEMENT function is turned off.
• Set this function to ON under normal conditions.
PIP
You can choose one of four positions for the sub-picture.
1Press the 6
66 6 buttons to choose PIP. Then 
press the a
aa a button
The PIP menu appears.
2Press the 5
55 5 buttons to choose the position. 
Then press the a
aa a button Area Country or region System
Asia, 
Middle 
EastBahrain, Kuwait, Oman, Qatar, United 
Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, 
Thailand, India, etc.PAL
China, Vietnam, etc PAL
Hong Kong, etc PAL
Islamic Republic of Iran, Lebanon, 
Saudi Arabia, etc.SECAM
Philippines, Taiwan, Myanmar, etc NTSC
EuropeRussia, etc SECAM
Czech Republic, Poland, etc PAL
Germany, Holland, Belgium, etc PAL
UK, etc PAL
Oceania Australia, New Zealand, etc PAL
AfricaRepublic of South Africa, etc PAL
Nigeria, etc PAL
Egypt, Morocco, etc SECAM
TV OKBACK
D0016-EN
COLOUR SYSTEM
MAINSUB
PAL
AUTO
TV OKBACK
D0017-EN
4:3 AUTO ASPECT
PANORAMIC
REGULAR
14:9 ZOOM
D0061-EN
TV OKBACK PIP
LT-Z32&26S2_Eng.book  Page 20  Thursday, December 18, 2003  10:11 AM
 
						

							21
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
SOUND SETTING
Refer to “Using the TV’s menu” (see page 17) for details of 
displaying the menu.
STEREO / I • II
When you are viewing a bilingual broadcast programme, 
you can choose the sound from Bilingual I (Sub I) or 
Bilingual II (Sub II). When the stereo broadcasting is 
received poorly, you can change from stereo to mono sound 
so that you can hear the broadcast more clearly and easily.
• The sound mode you can choose differs depending on 
the TV programme.
• This function does not work in the VIDEO modes. And 
this function does not appear in the SOUND SETTING 
menu.
Sound Adjustment
You can adjust the sound to your liking.
BASS:
You can adjust the low tone of the sound.
2 : weaker
3 : strong
TREBLE:
You can adjust the high tone of the sound.
2 : weaker
3 : strong
BALANCE:
You can adjust the volume balance between the left and 
right speaker.
2 : turn the left speaker’s volume level up.
3 : turn the right speaker’s volume level up.
SPEAKER
You can turn off the sound from the TV speakers; but you 
should only do this if an audio system is connected to the 
TV as a substitute for the TV speakers.
ON:
The TV speakers issue sound.
OFF:
The TV speakers does not issue sound.
BBE
You can use the BBE function to enjoy easy-to-listen sound 
that is faithful to the original sound recorded.
ON:
This function is turned on.
OFF:
This function is turned off.
• Licensed by BBE Sound, Inc. BBE is a registered 
trademark of BBE Sound, Inc.
CINEMA SURROUND
You can enjoy Surround sound with a “live” effect by using 
the CINEMA SURROUND function.
ON:
CINEMA SURROUND function is turned on.
OFF:
CINEMA SURROUND function is turned off.
A.H.B. (Active Hyper Bass)
Used when you want to emphasize the bass sound.
ON:
This function is turned on.
OFF:
This function is turned off. s: Stereo sound
v: mono sound
t: Bilingual I (sub I)
u: Bilingual II (sub II)
D0019-EN
ON OFF
ON OFF
BACK
SOUND SETTING
TVOK
ON OFF STEREO/
BASS
TREBLE
BALANCE
SPEAKER
BBE
CINEMA SURROUNDA.H.B.
HEADPHONEON OFF
LT-Z32&26S2_Eng.book  Page 21  Thursday, December 18, 2003  10:11 AM
 
						

							SOUND SETTING
22
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
HEADPHONE
You need to use the HEADPHONE menu to adjust the 
volume of the headphones.
The HEADPHONE menu can also be used to set whether or 
not sound comes from the TV speakers when the 
headphones are being used and to perform the settings for 
the sound coming from the headphones.
1 Press the 6
66 6 buttons to choose HEADPHONE. 
Then press the a
aa a button
The sub-menu of the HEADPHONE function appears.
2 Press the 6
66 6 buttons to choose a function. 
Then press the 5
55 5 buttons to change the 
setting
VOLUME:
You can change the volume of the headphones.
TV SPEAKER:
You can turn the TV’s speakers on or off.
ON:
The sound comes from the TV’s speakers when using 
the headphones.
OFF:
The sound does not come from the TV’s speakers 
when using the headphones.
OUTPUT:
You can choose the sound output to the headphones.
MAIN:
You can listen to the sound of the main-picture with 
your headphones.
SUB:
You can listen to the sound of the sub-picture with 
your headphones.
• When the sub-picture is a television programme, 
the sound becomes monaural.
3 Press the a
aa a button
Hint:
When a sub-picture is displayed, the sound of the sub-
picture can be listened to with the headphones while 
listening to the sound of the main-picture with the TV 
speakers. To do this, set TV SPEAKER to ON and 
OUTPUT to SUB.
• Headphones do not work with sound adjusted for BASS 
and TREBLE, BBE effect sound, A.H.B. effect sound, 
and CINEMA SURROUND effect sound.
D0044-EN
LT-Z32&26S2_Eng.book  Page 22  Thursday, December 18, 2003  10:11 AM
 
						

							23
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
FEATURES
Refer to “Using the TV’s menu” (see page 17) for details of 
displaying the menu.
SLEEP TIMER
You can set the TV to automatically turn off after a 
specified period of time.
1 Choose SLEEP TIMER, then press the a
aa a 
button
A Sub-menu of the SLEEP TIMER function appears.
2 Press the 5
55 5 buttons to set the period of time.
Then press the a
aa a button
You can set the period of time a maximum of 120 
minutes (2 hours) in 10 minute increments.
• One minute before the SLEEP TIMER function turns 
off the TV, “GOOD NIGHT!” appears.
• The SLEEP TIMER function cannot be used to turn 
off the TV’s main power.
• When the SLEEP TIMER function is on, you can 
display the Sub-menu of the SLEEP TIMER function 
again to confirm and/or change the remaining period 
of time of the SLEEP TIMER function. Press the a 
button to exit the menu after confirming and / or 
changing the remaining time.
To cancel the SLEEP TIMER function:
Press the 2 button to set a period of time to “OFF”.
BLUE BACK
You can set the TV to automatically change to a blue screen 
and mute the sound if the signal is weak or absent, or when 
there is no input from an external device.
ON:
This function is turned on.
OFF:
This function is turned off.
CHANNEL GUARD
When there is a TV channel you wish your children not to 
watch, you can use the CHANNEL GUARD function to 
lock out the TV channel. Even when a child chooses a 
Programme number (PR) in which a locked TV channel has 
been registered, the screen will change to blue and displays 
n (CHANNEL GUARD) so the TV channel cannot be 
viewed. Unless you enter a pre-set ID number by a special 
operation, the lock cannot be released and the child cannot 
view the TV channel programmes.
„To set the CHANNEL GUARD function
1 Choose CHANNEL GUARD, then press the 
o
oo o button
“SET ID NO.” (ID number setting screen) appears.
2 Set the ID number to your liking
1 Press the 6
66 6 buttons to choose a number.
2 Press the 5
55 5 buttons to move the cursor.
3Press the a
aa a button
The Sub-menu of CHANNEL GUARD appears.
4Press the 6
66 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme 
number (PR) changes, and the picture of the TV channel 
registered in the Programme number (PR) is displayed 
on the screen.
5 Press the blue button and set the CHANNEL 
GUARD function.
Then press the a
aa a button
n (CHANNEL GUARD) appears and the TV channel is 
locked.
To reset the CHANNEL GUARD function:
Press the blue button again.
n (CHANNEL GUARD) disappears.
To disable easy resetting of the CHANNEL GUARD 
function, the menu disappears by choosing the 
CHANNEL GUARD function and pressing the a 
button as in the ordinary menu operation.
„To view a locked TV channel
1 Choose a Programme number (PR) in which a 
TV channel locked with the Number buttons or 
PR LIST
The screen changes to blue and the n (CHANNEL 
GUARD) appears. You cannot view the TV channel.
2Press the 
h
hh h (Information) button to display “ID 
NO.” (ID NO. input screen)
D0023-EN
SLEEP TIMER
BLUE BACK
CHANNEL GUARDOFF ON
BACK
FEATURES
TVOK
D0024-EN
OFF0120
BACK
SLEEP TIMER
TVOK
D0025-EN
BACK SET ID NO.
0 000
TVOK
D0026-EN
CHANNEL GUARD   
CH / CC
PR ID
AV
01
02
03
04
05
06
07
08
09CH
CH
CH
CH
CH
CH
CC
CC
CC21
22
23
24
25
26
01
02
03
BBC1
LOCK
BACKTVOK
5D0027-EN
5
ID NO . :
D0028-EN
LT-Z32&26S2_Eng.book  Page 23  Thursday, December 18, 2003  10:11 AM
 
						

							FEATURES
24
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
3 Press the Number buttons to enter the ID 
number
The lock is temporarily released so you can view the TV 
channel.
If you have forgotten the ID number:
Perform step 1 of “To set the CHANNEL GUARD 
function”. After confirming the ID number, press the 
b button to exit the menu.
• Even if you reset the lock temporarily, it does not 
mean that the CHANNEL GUARD function set for 
the TV channel is cancelled. The next time anyone 
attempts to view the TV channel, it will be locked 
again.
• When you would like to cancel the CHANNEL 
GUARD function, you must perform the operation 
“To set the CHANNEL GUARD function” again.
• To disable easy choosing of a Programme number 
(PR) in which a locked TV channel has been 
registered, the Programme number (PR) has been set 
that it cannot be chosen by the 6 buttons or the 
operation buttons at the TV.
• To disable easy resetting of the lock, “ID NO.” (ID 
NO. input screen) is set so that it cannot appear unless 
you press the 
h (Information) button.
LT-Z32&26S2_Eng.book  Page 24  Thursday, December 18, 2003  10:11 AM
 
						

							25
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
INSTALL
Refer to “Using the TV’s menu” (see page 17) for details of 
displaying the menu.
LANGUAGE
You can choose the language you want to use for the on-
screen display from the language list in a menu.
1 Choose LANGUAGE, then press the a
aa a button
A sub-menu of the LANGUAGE function appears.
2 Press the 5
55 5 and 6
66 6 buttons to choose a 
language. Then press the a
aa a button
AUTO PROGRAM
You can automatically register the TV channels which can 
be received well at your residence in the TV’s Programme 
numbers (PR) by performing the following.
1 Choose AUTO PROGRAM. Then press the a
aa a 
button
The TELETEXT LANGUAGE menu appears as a sub-
menu of the AUTO PROGRAM function.
2 Press the 6
66 6 buttons to choose the teletext 
language group that corresponds to the 
language of teletext programme that you want 
to watch
3Press the a
aa a button to start the AUTO 
PROGRAM function
The AUTO PROGRAM menu appears and received TV 
channels are automatically registered in the Programme 
numbers (PR).
• To cancel the AUTO PROGRAM function, press the 
b button.
After the TV channels have been registered in 
the Programme numbers (PR), the EDIT menu 
appears.
• You can proceed to edit the Programme numbers 
(PR) using the EDIT/MANUAL function. For details, 
see “EDIT/MANUAL” on page 25.
• If you do not need to use the EDIT/MANUAL 
function, go to the next step.
4Press the a
aa a button
EDIT/MANUAL
The EDIT/MANUAL functions are divided into two types: 
editing of the current Programme numbers (PR) (EDIT 
functions) and manual registration of a TV channel you 
want to view to the Programme number (PR) (MANUAL 
function). The details about these functions are as follows:
Caution
• Using the MOVE, DELETE or INSERT function 
rewrites the current Programme numbers (PR) list. 
Resultingly, the Programme number (PR) of some of 
the TV channels will change.
• Using the MANUAL function for a TV channel for which 
the CHANNEL GUARD function has been set cancels 
the CHANNEL GUARD function for the TV channel.
• When a TV channel has already been registered in PR 
99, using the INSERT function deletes the TV channel.
1 Choose EDIT/MANUAL, then press the a
aa a 
button
• For Programme number PR 0, “AV” appears in the 
Programme numbers (PR) list.
• A VIDEO terminal number does not appear in the 
Programme numbers (PR) list.
• The CH/CC number is a number unique to the TV 
and corresponding to the Channel number of a TV 
channel. For the relationship of a Channel number 
and a CH/CC number, see “CH/CC numbers” on 
page 31. Group Languages
GROUP-1 Turkish, Hungarian, English, German, 
French, Italian, Spanish, Portuguese, 
Greek, Swedish, Finnish
GROUP-2 Polish, Serbian, Croatian, Slovenian, 
Czech, Slovak, Rumanian, Hungarian, 
German, French, Italian, Swedish, 
Finnish
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian, 
Estonian, Ukrainian, Serbian, Croatian, 
Slovenian, Czech, Slovak, English, 
German
GROUP-4 Arabic, Czech, Slovak, Hungarian, 
English, German, French, Italian, 
Spanish, Portuguese, Swedish, Finnish
TV OKBACK
D0029-EN
INSTALL
LANGUAGE
AUTO PROGRAM
EDIT / MANUAL
D0002(E)-EN
BACK  LANGUAGETVOK
D1003-EN
TELETEXT LANGUAGEGROUP-1
GROUP-2
GROUP-3
GROUP-4
BACK
TVOK
BACKTVOK
EDIT
CH / CC
PR IDAV
01
02
03
04
05
06
07
08
09CH
CH CH
CH CH CH
CC
CC
CC21
23 22
26 25 24
01
02
03ID
INSERT
DELETE
MANUAL CH 10 AUTO PROGRAM
20%
D0004-ENMOVEBACKTV OK
D0038-EN
MOVE
EDIT
CH / CC
PR ID
AV
01
02
03
04
05
06
07
08
09CH
CH
CH
CH
CH
CH
CC
CC
CC
21
22
23
24
25
26
01
02
03
ID
INSERT
DELETE
MANUALBACKTVOK
LT-Z32&26S2_Eng.book  Page 25  Thursday, December 18, 2003  10:11 AM
 
						

							INSTALL
26
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
2 Follow the operation description of a function 
you want to use and operate the function
MOVE:
This function changes a Programme number (PR) of a 
TV channel.
ID:
This function registers a Channel name (ID) to a TV 
channel.
INSERT:
This function adds a new TV channel in the current 
Programme numbers (PR) list by using the CH/CC 
number.
• You cannot use the INSERT function if you do not 
know a Channel number of a TV channel. Use the 
MANUAL function to register a TV channel in the 
Programme number (PR).
DELETE:
This function deletes an unnecessary TV channel.
MANUAL:
This function manually registers a new TV channel in a 
Programme number (PR).
3 Press the a
aa a button
„MOVE
1 Press the 6
66 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme 
number (PR) is changed over, and the picture of the TV 
channel registered in the Programme number (PR) 
appears on the screen.
2 Press the 3
33 3 button to start the MOVE function
3 Press the 6
66 6 buttons to choose a new 
Programme number (PR)
To cancel the MOVE function:
Press the 
h (Information) button.
4 Press the 2
22 2 button to change the Programme 
number (PR) of a TV channel to a new 
Programme number (PR)
„ID
1 Press the 6
66 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme 
number (PR) is changed over, and the picture of the TV 
channel registered in the Programme number (PR) 
appears on the screen.
2 Press the red button to start the ID function
3 Enter a channel name (ID).
Press the 6
66 6 buttons to choose a character.
Press the 5
55 5 buttons to move the cursor.
To cancel the ID function:
Press the 
h (Information) button.
4Press the a
aa a button to register a Channel name 
(ID) to a TV channel
„INSERT
Preparation:
• A CH/CC number unique to this TV and corresponding 
to the Channel number of a TV channel is required. Find 
the corresponding CH/CC number from a table “CH/CC 
numbers” on page 31 based on the Channel number of 
the TV channel.
1Press the 6
66 6 buttons to choose a Programme 
number (PR) for which you will register a new 
TV channel
2 Press the green button and start the INSERT 
function
3Press the 6
66 6 buttons to choose “CC” or “CH” 
according to the CH/CC number of the TV 
channel
To cancel the INSERT function:
Press the 
h (Information) button.
D0030-EN
EDIT
CH / CC
PR ID
AV
01
02
03
04
05
06
07
08
09CH
CH
CH
CH
CH
CH
CC
CC21
22
23
24
25
26
02
03
CC01
BACKTVOK
STORE
D0031-EN
EDIT
CH / CC
PR ID
AV
01
02
03
04
05
06
07
08
09CH
CH
CH
CH
CH
CH
CC
CC
CC21
22
23
24
25
26
01
02
03
ID LIST
BACKTVOK
D0032-EN
EDIT
CH / CC
PR ID
AV
01
02
03
04
05
06
07
08
09CH
CH
CH
CH
CH
CH
CC
CC
CC21
22
23
24
25
26
01
02
03 M
ID LIST
BACKTVOK
D0034-EN
EDIT
CH / CC
CH / CC PR ID
AV
01
02
03
04
05
06
07
08
09CH
CH
CH
CH
CH
CH
CH
CC
CC21
22
23
24
25
26
02
03
BACKTV OK09
LT-Z32&26S2_Eng.book  Page 26  Thursday, December 18, 2003  10:11 AM
 
						

							27
INSTALL
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
4 Press the Number buttons to enter the 
remaining CH/CC number
The TV shifts to registration mode.
When the registration is completed, the picture of the TV 
channel appears on the screen.
• The CH/CC number is a number indicating the 
broadcast frequency to the TV. If the TV cannot 
detect the TV channel corresponding to the broadcast 
frequency indicated by the CH/CC number, a picture 
in the no-signal state appears.
„DELETE
1 Press the 6
66 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme 
number (PR) is changed over, and the picture of the TV 
channel registered in the Programme number (PR) 
appears on the screen.
2 Press the yellow button to delete the TV 
channel
The TV channel is deleted from the Programme numbers 
(PR) list.
„MANUAL
1 Press the 6
66 6 buttons to choose a Programme 
number (PR) to which you want to register a 
new TV channel
2 Press the blue button to activate the MANUAL 
function
At the right side following the CH/CC number, the 
SYSTEM (broadcasting system) of the TV channel 
appears.
To cancel the MANUAL function:
Press the 
h (Information) button.
3 Press the 3
33 3 button to choose the SYSTEM 
(sound system) for a TV channel you want to 
register
Refer to the following table for the various international 
sound systems.Sound system
4 Press the green or red button to search for a TV 
channel
Scanning stops when the TV finds a TV channel. Then 
the TV channel is displayed.
5 Press the green or red button repeatedly until 
the TV channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV 
channel.
If you cannot hear the normal sound even when 
the picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3 button and 
choose a SYSTEM that has normal sound.
6Press the a
aa a button and register the TV 
channel to a Programme number (PR)
The normal EDIT menu is resumed.
D0035-EN
MANUAL
CH / CC
PR ID
AV
01
02
03
04
05
06
07
08
09CH
CH
CH
CH
CH
CH
CC
CC
CC21
22
23
24
25
26
01
02
03(
B / G)
BACKTVOKSYSTEM
SEARCH+
SEARCH-FINE+
FINE-
Area Country or region System
Asia, 
Middle 
EastBahrain, Kuwait, Oman, Qatar, United 
Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, 
Thailand, India, etc.B/G
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, 
Saudi Arabia, etc.B/G
Philippines, Taiwan, Myanmar, etc M
EuropeRussia, etc. D/K
Czech Republic, Poland, etc. D/K
Germany, Holland, Belgium, etc. B/G
UK, etc. I
Oceania Australia, New Zealand, etc. B/G
AfricaRepublic of South Africa, etc. I
Nigeria, etc. B/G
Egypt, Morocco, etc. B/G
LT-Z32&26S2_Eng.book  Page 27  Thursday, December 18, 2003  10:11 AM
 
						

							INSTALL
28
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Changing the TELETEXT LANGUAGE 
setting
After the AUTO PROGRAM function is completed, you 
can change the country you have already set by using the 
AUTO PROGRAM function.
1 Display the INSTALL menu
When the EDIT menu is currently being 
displayed:
Press the 
h (Information) to return to the INSTALL 
menu.
2 Press the 6
66 6 buttons to choose AUTO 
PROGRAM. Then press the a
aa a button
A TELETEXT LANGUAGE menu appears as a sub-
menu of the AUTO PROGRAM function.
3 Press the 6
66 6 buttons to choose a group
4 Press the b
bb b button to complete the setting
The menu disappears.Group Languages
GROUP-1 Turkish, Hungarian, English, German, 
French, Italian, Spanish, Portuguese, 
Greek, Swedish, Finnish
GROUP-2 Polish, Serbian, Croatian, Slovenian, 
Czech, Slovak, Rumanian, Hungarian, 
German, French, Italian, Swedish, 
Finnish
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian, 
Estonian, Ukrainian, Serbian, Croatian, 
Slovenian, Czech, Slovak, English, 
German
GROUP-4 Arabic, Czech, Slovak, Hungarian, 
English, German, French, Italian, 
Spanish, Portuguese, Swedish, Finnish
D1003-EN
TELETEXT LANGUAGEGROUP-1
GROUP-2
GROUP-3
GROUP-4
BACK
TVOK
LT-Z32&26S2_Eng.book  Page 28  Thursday, December 18, 2003  10:11 AM