JVC Lt Z32s2 Instructions
Have a look at the manual JVC Lt Z32s2 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 LT-Z32/26S2 (ASIA) / LCT1597-001A / All cover WIDE LCD PANEL TVINSTRUCTIONSENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO PORTUGUÊS Cover 1 LCT1597-001A LT-Z32S2 LT-Z26S2 LCT1597-001A_Cover.fm Page 1 Friday, November 28, 2003 11:14 AM
2 LT-Z32/26S2 (ASIA) / LCT1597-001A / All cover Cover 2 LT-Z32/26S2 (ASIA) / LCT1597-001A / All cover LCT1597-001A_Cover.fm Page 2 Friday, November 28, 2003 11:14 AM
1 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING Always use the power cord which is supplied with the TV. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING • Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down. • The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down. • Do not allow children to hang from the TV, place their elbows on the TV or lean against the TV. Doing so may cause the TV to fall over and lead to injuries. CAUTION Do not press hard on the speaker area at the bottom front panel of the TV. Doing so can cause a dent to occur on the metal grid. Metal grid LT-Z32&26S2_Eng.book Page 1 Thursday, December 18, 2003 10:11 AM
2 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Failure to take the following precautions may cause damage to the television or remote control. DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) DO NOT place anything on top of the TV. (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) DO NOT allow objects or liquid into the cabinet openings. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.) DO NOT place any naked flame sources, such as lighted candles, on the TV. DO NOT subject the TV to direct sunlight. „Cleaning the screen The screen is coated with a special thin film to reduce reflection. If this film is damaged, uneven colors, discoloration, scratches, and other problems that can not be repaired may occur. Pay attention to the following when handling the screen. • Do not use glue or adhesive tape on the screen. • Do not write on the screen. • Do not allow the screen to come in contact with any hard objects. • Do not allow condensation to form on the screen. • Do not use alcohol, thinner, benzene or other solvents on the screen. • Do not rub the screen hard. Point defects LCDs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time. Distance recommendations Avoid improper installation and never position the unit where good ventilation is impossible. When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation. The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it. If there is a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. CAUTION: • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Avoid damaging the AC plug and power cord.• When you are not using this unit for a long period of time, it is recommended that you disconnect the power cord from the main outlet. D.I.S.T. demonstration To start the D.I.S.T. demonstration: Press the a button to display the MENU (main menu). Then press the yellow button. A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen. To quit the D.I.S.T. demonstration: Press the yellow button, b button, P p buttons or any of the number buttons. 200 mm 200 mm 50 mm 150 mm150 mm LT-Z32&26S2_Eng.book Page 2 Thursday, December 18, 2003 10:11 AM
3 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH CONTENTS Setting up your TV..................................4 Installation ..........................................................4 Using the stand ..................................................4 Putting the batteries into the Remote control .....5 Remove the terminal covers ..............................5 Connecting the aerial and VCR .........................6 Connecting the power cord to the AC outlet ......6 Initial settings .........................................7 TV buttons and functions ......................9 Turn the TV on from standby mode ...................9 Choose a TV channel ........................................9 Watch images from external devices .................9 Adjust the volume ..............................................9 Using the headphone .........................................9 Using the Menu ..................................................9 Remote control buttons and functions ............................................10 Turn the TV on or off from standby mode ........10 Choose a TV channel ......................................10 Adjust the volume ............................................11 Watch images from external devices ...............11 ZOOM function.................................................12 CINEMA SURROUND function........................12 Displaying the current time ..............................13 Return to TV channel instantly .........................13 Using the FREEZE function .............................13 Using the PIP function .....................................13 Using the MULTI-PICTURE function ...............14 Operating a JVC brand VCR or DVD player ....14 Teletext function ...................................15 Basic operation ................................................15 Using the List Mode .........................................15 Hold..................................................................15 Sub-page .........................................................16 Reveal ..............................................................16 Size ..................................................................16 Index ................................................................16 Cancel ..............................................................16 Using the TV’s menu ............................17 Basic operation ................................................17 PICTURE SETTING ...............................18 PICTURE MODE .............................................18 Picture Adjustment ...........................................18 WHITE BALANCE............................................18 PICTURE FEATURES ...........................19 DIGITAL VNR ..................................................19 Super DigiPure.................................................19 COLOUR SYSTEM ..........................................20 PULL DOWN....................................................20 4:3 AUTO ASPECT..........................................20 COLOUR MANAGEMENT ...............................20 PIP ...................................................................20 SOUND SETTING ................................. 21 STEREO / I • II ................................................ 21 Sound Adjustment ........................................... 21 SPEAKER ....................................................... 21 BBE ................................................................. 21 CINEMA SURROUND .................................... 21 A.H.B. (Active Hyper Bass) ............................. 21 HEADPHONE ................................................. 22 FEATURES............................................ 23 SLEEP TIMER ................................................ 23 BLUE BACK .................................................... 23 CHANNEL GUARD ......................................... 23 INSTALL ................................................ 25 LANGUAGE .................................................... 25 AUTO PROGRAM........................................... 25 EDIT/MANUAL ................................................ 25 Changing the TELETEXT LANGUAGE setting... 28 Additional preparation......................... 29 Connecting the external devices ..................... 29 CH/CC numbers ................................... 31 Troubleshooting................................... 32 Specifications....................................... 34 LT-Z32&26S2_Eng.book Page 3 Thursday, December 18, 2003 10:11 AM
4 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Ensure that the TV is installed on the wall by a skilled installer. Installation Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way. • The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow satisfactory cooling. See “Distance recommendations” on page 2. A protective sheet is affixed to the TV panel frame. Using the stand This TV comes with a Table Top Stand already attached. This stand can be used to adjust the direction of the TV screen 5° up, 10° down, and 20° to the left or right. „Tilt the TV up and down: While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt the TV up and down. • As a safety measure, the stand is constructed so that it requires a certain amount of force to tilt the TV. „Rotate the TV to the left and right: While holding the bottom of the stand with one hand, use your other hand to hold the edge of the panel and slowly adjust the direction of the TV screen. „Cable holder A cable holder which is used to keep the connection cables tidy is attached to the back of the stand. Gently squeeze the left and right of the cable holder and pull it to remove it from the stand. After putting the cables in the cable holder, attach it to the back of the stand again. cable holder LT-Z32&26S2_Eng.book Page 4 Thursday, December 18, 2003 10:11 AM
5 Setting up your TV LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Putting the batteries into the Remote control Use two AA/R6 dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. • Follow the warnings printed on the batteries. • Battery life is about six months to one year, depending on your frequency of use. • The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary. • If the remote control does not work properly, replace the batteries. Remove the terminal covers There are connection terminals behind the covers on the left and right of the rear of the TV. Remove these two covers before connecting an antenna or VCR. • Leave the covers off if they do not fit properly. Do not force to replace the covers. Doing so may cause damages of the connection cables and the covers. For LT-Z32S2 Remove the covers by removing the hooks. When replacing the covers, place the side of the covers against the TV and insert the hooks. For LT-Z26S2 The covers can be removed by removing the hook at the bottom and then pulling out while lifting slightly. To replace the covers, first connect the hook at the top of the cover to the TV and then insert the hook at the bottom. • Leave these covers off when mounting the TV on a wall. LT-Z32&26S2_Eng.book Page 5 Thursday, December 18, 2003 10:11 AM
Setting up your TV 6 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Connecting the aerial and VCR • Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. • Read the manual that came with the VCR before connecting. If not connecting a VCR (follow 1 11 1): Connect an aerial cable to the aerial socket on this TV. If connecting a VCR: 1 Connect the aerial cable to the aerial input socket on the VCR, and connect the VCR and TV with another aerial cable 2 Connect the VCR’s VIDEO OUT (video output) terminal and the TV’s VIDEO terminal with a video cable To connect a VCR to the TV with an S-VIDEO cable: Connect the VCR’s S-VIDEO OUT (S-VIDEO output) terminal and TV’s S-VIDEO terminal with an S-VIDEO cable A, instead of connecting with a video cable. Note that the connection with a video cable will be ignored in case you connect a VCR to the TV with both video cable and S-VIDEO cable. 3 Connect the VCR’s VIDEO OUT (audio L/R output) terminals and the TV’s AUDIO terminals with an audio cable • To connect additional external devices, please see “Connecting the external devices” on page 29. Connecting the power cord to the AC outlet Insert the AC plug on the power cord from the TV into AC outlet. The power lamp will light and the TV will enter standby mode. Caution • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Remove the AC plug from the outlet to completely disconnect the TV from the power supply. 1 1 2 3 VIDEO L L RIN(VIDEO-1) VIDEO AUDIOS-VIDEO VIDEO RIN(VIDEO-2) VIDEO AUDIOVIDEO RAUDIO S-VIDEO VIDEO L R OUT VIDEO AUDIOS-VIDEOIN (VIDEO-3)Y L R Cb/Pb Cr/PrCOMPOMENT (VIDEO-4)AUIDO L VIDEO L L R IN( VIDEO -1) VIDEO AU DIOS-VIDEO VIDEO IN( VIDEO -2) VIDEOS-VIDEO without terminal covers LT-Z32&26S2_Eng.book Page 6 Thursday, December 18, 2003 10:11 AM
7 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to make the initial settings. 1 Make sure to set the VCR/TV/DVD switch to the TV position. • You cannot turn the TV on when the VCR/TV/DVD switch is set to the VCR or DVD position. 2 Press the # ## # button on the remote control The TV turns on from standby mode and the JVC logo is displayed. • Check that the AC plug on the power cord from the TV is connected to AC outlet. • The JVC logo does not appear when your TV has been turned on once. In this case, use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “INSTALL” on page 25. 3Press the a aa a button The LANGUAGE menu appears. 4Press the 5 55 5 and 6 66 6 buttons to choose ENGLISH. Then press the a aa a button English is set for the on-screen display description. The TELETEXT LANGUAGE menu appears as a sub-menu of the AUTO PROGRAM function. 5Press the 6 66 6 buttons to choose the teletext language group that corresponds to language of teletext programme that you want to watch VCR/TV/DVD Switch Yellow button Blue button Remote control sensor Power lamp Group Languages GROUP-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish GROUP-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian, Swedish, Finnish GROUP-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian, Slovenian, Czech, Slovak, English, German GROUP-4 Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish, Finnish D0002(E)-EN BACK LANGUAGETVOK D1003-EN TELETEXT LANGUAGEGROUP-1 GROUP-2 GROUP-3 GROUP-4 BACK TVOK LT-Z32&26S2_Eng.book Page 7 Thursday, December 18, 2003 10:11 AM
Initial settings 8 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH 6 Press the blue button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR). • To cancel the AUTO PROGRAM function: Press the b button. After the TV channels have been registered in the Programme numbers (PR), the EDIT menu appears • You can proceed to edit the Programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/MANUAL” on page 25. • If you do not need to use the EDIT/MANUAL function, go to the next step. 7 Press the a aa a button BACKTVOK EDIT CH / CC PR IDAV 01 02 03 04 05 06 07 08 09CH CH CH CH CH CH CC CC CC21 23 22 26 25 24 01 02 03ID INSERT DELETE MANUAL CH 10 AUTO PROGRAM 20% D0004-ENMOVEBACKTV OK LT-Z32&26S2_Eng.book Page 8 Thursday, December 18, 2003 10:11 AM