JVC Lt Z32s2 Instructions

1
LT-Z32/26S2 (ASIA) / LCT1597-001A / All cover
WIDE LCD PANEL TVINSTRUCTIONSENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
CASTELLANO
ITALIANO
PORTUGUÊS
Cover 1
LCT1597-001A
LT-Z32S2
LT-Z26S2
LCT1597-001A_Cover.fm  Page 1  Friday, November 28, 2003  11:14 AM
 

2
LT-Z32/26S2 (ASIA) / LCT1597-001A / All cover
Cover 2
LT-Z32/26S2 (ASIA) / LCT1597-001A / All cover
LCT1597-001A_Cover.fm  Page 2  Friday, November 28, 2003  11:14 AM
 

1
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Thank you for buying this JVC LCD flat television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
(“LCD” stands for Liquid Crystal Display.)
WARNING
Always use the power cord which is supplied with the TV.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR 
MOISTURE.
WARNING
• Fingers may be trapped under the TV causing injuries. Hold the TV at the 
bottom in the...

2
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Failure to take the following precautions may cause damage to the television or remote control.
DO NOT block the TV’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)
DO NOT place anything on top of the TV.
(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)
DO NOT allow objects or liquid into the cabinet openings.
(If water or...

3
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
CONTENTS
Setting up your TV..................................4
Installation ..........................................................4
Using the stand ..................................................4
Putting the batteries into the Remote control .....5
Remove the terminal covers ..............................5
Connecting the aerial and VCR .........................6
Connecting the power cord to the AC outlet ......6
Initial settings...

4
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Setting up your TV
• When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV.
• Ensure that the TV is installed on the wall by a skilled installer.
Installation
Cautions for installation
• Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.
• The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV...

5
Setting up your TV
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Putting the batteries into the Remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making sure the + and - polarities are correct.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on your frequency of use.
• The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary.
• If the remote control...

Setting up your TV
6
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Connecting the aerial and VCR
• Aerial cable is not supplied. Use a good quality 75-ohm 
coaxial cable.
• Read the manual that came with the VCR before 
connecting.
If not connecting a VCR (follow 1
11 1):
Connect an aerial cable to the aerial socket on this 
TV.
If connecting a VCR:
1 Connect the aerial cable to the aerial input 
socket on the VCR, and connect the VCR and 
TV with another aerial cable
2 Connect the VCR’s VIDEO OUT...

7
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Initial settings
When the TV is first turned on, it enters the initial setting 
mode, and the JVC logo is displayed. Follow the 
instructions on the on-screen display to make the initial 
settings.
1 Make sure to set the VCR/TV/DVD switch to the 
TV position.
• You cannot turn the TV on when the VCR/TV/DVD 
switch is set to the VCR or DVD position.
2 Press the #
## # button on the remote control
The TV turns on from standby mode and the JVC logo is...

Initial settings
8
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
6 Press the blue button to start the AUTO 
PROGRAM function
The AUTO PROGRAM menu appears and received TV 
channels are automatically registered in the Programme 
numbers (PR).
• To cancel the AUTO PROGRAM function:
Press the b button.
After the TV channels have been registered in 
the Programme numbers (PR), the EDIT menu 
appears
• You can proceed to edit the Programme numbers 
(PR) using the EDIT/MANUAL function. For details, 
see...