JVC Lt Z32s2 Instructions
Have a look at the manual JVC Lt Z32s2 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH TV buttons and functions Refer to the pages in parentheses for details. 1Remote control sensor 2Power lamp (page 7) 3MENU/OK button (pages 9, 17) 4TV/AV button (page 9) 5r (Volume) q buttons (page 9) 6P p buttons (page 9) 7A (Stand by) button (page 9) 8Headphone jack (mini jack) (page 29) Turn the TV on from standby mode Press the A AA A button or P p pp p buttons to turn the TV on from standby mode When the TV is turned on, the power lamp dims slightly. • Check that the AC plug on the power cord from the TV is connected to correctly AC outlet. Choose a TV channel Press the P p pp p buttons to choose a programme number (PR) or an VIDEO terminal Watch images from external devices Press the TV/AV button to choose a VIDEO terminal • The leading character is changed from V to S (e.g. V1 is changed to S1) when VIDEO-1 or VIDEO-2 is connected to the S terminal. Adjust the volume Press the q qq q buttons The volume level indicator appears. Using the headphone • The headphone volume is adjusted with the “HEADPHONE” menu (see page 22). Using the Menu Use the MENU/OK button. Refer to“Using the TV’s menu” (see page 17) for details of using the menu. 1 2 3 4 5 6 7 8 VIDEO-2 VIDEO-3V3 V2 S2 V1S1VIDEO-1 V4VIDEO-4 TV mode VIDEO modes Last Programme number or or LT-Z32&26S2_Eng.book Page 9 Thursday, December 18, 2003 10:11 AM
10 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Remote control buttons and functions 1Muting button 2Number buttons 3Information button 4c button 53 sound button 6b button 75 buttons 8g (Text) button 9p p buttons 0VCR/DVD/Teletext control buttons -p buttons =Standby button ~VCR/TV/DVD switch !R button @Colour buttons #a button $D button %6 buttons ^f button &r q buttons *X button (g button Turn the TV on or off from standby mode 1 Make sure to set the VCR/TV/DVD switch to the TV position. • You cannot turn the TV on or off when the VCR/TV/ DVD switch is set to the VCR or DVD position. 2Press the # ## # (Standby) button to turn the TV on or off. When the TV is turned on, the power lamp dims slightly. • The power can be turned on by pressing the b button, p p buttons or Number buttons. • Check that the AC plug on the power cord from the TV is connected to AC outlet. Choose a TV channel „Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: •PR 6 → press 6 • PR 12 → press 1 and 2 „Use the p pp p p pp p buttons: Press the p pp p p pp p buttons to choose the programme number (PR) you want. LT-Z32&26S2_Eng.book Page 10 Thursday, December 18, 2003 10:11 AM
11 Remote control buttons and functions LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH „Use the PR LIST: 1 Press the h hh h (Information) button to display the PR LIST Pressing the h (Information) button changes the display as follows: 2 Press the 5 55 5 and 6 66 6 buttons to choose a Programme number (PR). Then press the a aa a button • For Programme numbers (PR) with the CHANNEL GUARD function set, the n (CHANNEL GUARD) mark is displayed next to the Programme number (PR) in the PR LIST. • You cannot use the 6 buttons to choose a Programme number (PR) with the CHANNEL GUARD function set. • Even if you try to choose a Programme number (PR) with the CHANNEL GUARD function set, the n (CHANNEL GUARD) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHANNEL GUARD” on page 23. • If you do not have a clear picture or no colour appears, follow the operation procedure “COLOUR SYSTEM” (see page 20). • The sound system is chosen automatically. However, if you cannot hear the sound normally even when the picture appears normally, choose the sound system manually. Refer to the MANUAL on the “INSTALL” menu (see page 25) for details of choosing the sound system. Adjust the volume Press the r rr r q qq q buttons to adjust the volume. The Volume indicator appears and the volume changes as you press the r q buttons. • The headphone volume is adjusted with the “HEADPHONE” menu (see page 22). „Muting the sound Press the l ll l (muting) button to turn off the sound. Pressing the l (muting) button again restores the previous volume level. Watch images from external devices „Use the o oo o button: Press the o oo o button to choose a VIDEO terminal. • The leading character is changed from V to S (eg V1 is changed to S1) when VIDEO-1 or VIDEO-2 is connected to the S terminal. „Use the p pp p p pp p buttons: Press the p pp p p pp p buttons to choose a VIDEO terminal. „Use the PR LIST: 1Press the h hh h (Information) button to display the PR LIST 2Press the 5 55 5 and 6 66 6 buttons to choose a VIDEO terminal. Then press the a aa a button • The VIDEO terminals are registered after the Programme number PR 99. • If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 20. To return to a TV channel: Press the b button or the Number buttons. To use the Programme number PR 0 (AV): When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 25. Pressing the o button changes the choice as follows: • The VCR RF channel is sent as the RF signal from the VCR. • Also refer to your VCR instruction manual. PR IDAV 01 02 03 04 05 06 07 08 09 D0011-EN 12 : 00 PR LIST TV OK+10 -10 No indication VIDEO-2 VIDEO-3V3 V2 S2 V1S1VIDEO-1 V4VIDEO-4 TV mode VIDEO modes Programme numbers PR 1 – PR 99 or or VIDEO-2 VIDEO-3V3 V2 S2 V1S1VIDEO-1 V4VIDEO-4 TV modeVIDEO modes Programme numbers PR 1 – PR 99or or PR 0 LT-Z32&26S2_Eng.book Page 11 Thursday, December 18, 2003 10:11 AM
Remote control buttons and functions 12 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 16:9 ZOOM mode or FULL mode according to the WSS signal. If a WSS signal is not included, the picture is displayed in accordance with the ZOOM mode set with the 4:3 AUTO ASPECT function. • For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO ASPECT” on page 20. • When the AUTO (WSS) mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, press the c button and change to another ZOOM mode. REGULAR: Use to view a normal picture (4:3 aspect ratio) as its original size is. PANORAMIC: This mode stretches the left and right sides of a normal picture (4:3 Aspect Ratio) to fill the screen, without making the picture appear unnatural. • The top and bottom of the picture are slightly cut off. 14:9 ZOOM: This mode zooms up the Wide Picture (14:9 Aspect Ratio) to the upper and lower limits of the screen. 16:9 ZOOM: This mode zooms up the Wide Picture (16:9 Aspect Ratio) to the full screen. 16:9 ZOOM SUBTITLE: This mode zooms up the Wide Picture (16:9 Aspect Ratio) with subtitles to the full screen. FULL: This mode uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. Use for pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), you can restore their original dimensions. „Choose the ZOOM mode 1Press the c cc c button to display the ZOOM menu • The c button does not work in the twin pictures mode. 2Press the 6 66 6 buttons to choose a ZOOM mode. Then press the a aa a button The picture expands and the chosen ZOOM mode is displayed in about 5 seconds. „Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, adjust the visible area of the picture manually. 1Press the c cc c button The ZOOM menu appears. 2Press the a aa a button to display the ZOOM mode indication Indicator is displayed. 3 While it is displayed, press the 6 66 6 buttons to adjust the visible area vertically • You cannot adjust the visible area in REGULAR or FULL mode. CINEMA SURROUND function You can enjoy sounds with a wider ambience. Press the 3 33 3 button to turn the CINEMA SURROUND function on or off • The CINEMA SURROUND function does not work properly with mono sound. • The CINEMA SURROUND function can be also turned on or off by using the SOUND SETTING menu. For details, see “CINEMA SURROUND” on page 21. TV OKBACK D0009-EN AUTO REGULAR PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM SUBTITLE FULL ZOOM 16 : 9 ZOOMD0010-EN LT-Z32&26S2_Eng.book Page 12 Thursday, December 18, 2003 10:11 AM
13 Remote control buttons and functions LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Displaying the current time You can display the Current Time on the screen. Press the h hh h (Information) button to display the current time Pressing the h (Information) button changes the display as follows: • This TV uses teletext data to set the current time. If the TV has not received a TV channel that has teletext programmes since it was turned on, the time display is blank. To view the current time, choose a TV channel that has teletext programmes. • When watching videos, an incorrect current time is sometimes displayed. Return to TV channel instantly You can return to a TV channel instantly. Press the b bb b button The TV returns to the TV mode and a TV channel appears. Using the FREEZE function You can view the current programme as a still picture. 1 Press the f ff f button The still picture of the current picture will appear. To cancel the FREEZE function: Press the f button, the p p buttons or the number buttons. • The FREEZE function does not work while a sub- picture is displayed. • The still picture cannot be output from the TV. • The FREEZE function is cleared if no operation is performed for approximately one minute. Using the PIP function You can view two pictures (Main-picture and sub-picture). A TV programme and a video programme from an external device can be watched at the same time. 1Press the R RR R button Pressing the R RR R button changes the PIP mode as follows: 2Press the p pp p buttons to change the sub- picture to the picture from another TV channel or another VIDEO terminal Listening to the sound of the sub-picture: You can listen to the sound of the sub-picture with the headphones while listening to the sound of the main- picture from the TV speakers. For details, see “HEADPHONE” on page 22. • The sub-picture sound is monaural. Changing the position of the sub-picture: You can choose one of four positions. For details, see “PIP” on page 20. Swapping the main-picture and sub-picture: Press the g button. The main-picture and sub-picture will be swapped. PR IDAV 01 02 03 04 05 06 07 08 09 D0011-EN 12 : 00 PR LIST TV OK+10 -10 No indication D0056 current programmestill picture D0057 Twin pictures mode Picture in picture mode Cancel the PIP function Main- picture Main- picture Main- pictureSub- picture Sub- picture AB D0051 AB LT-Z32&26S2_Eng.book Page 13 Thursday, December 18, 2003 10:11 AM
Remote control buttons and functions 14 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Cancelling the PIP function: Press the R RR R button or b button. • If the main-picture signal is poor, the quality of the sub-picture may also be poor. • If the pictures have different standards, the top and bottom of one of them may be missing. • If an external device is operated, the sub-picture may disappear. If this happens, press the R RR R button again to redisplay the sub-picture. • You cannot view a scrambled channel in the sub- picture. If the g button is pressed when viewing a scrambled channel in the main-picture using an external decoder, the channel you have been viewing in the sub-picture will appear in both the main-picture and sub-picture. • The ZOOM function does not work in the twin- picture mode. • Do not press the g button while you are recording the TV output on the VCR. If you do, the TV output signal will change. • The BLUE BACK function does not work in the twin picture mode or the picture-in-picture mode. • PIP function does not work for a picture of 1125i signal. See “VIDEO-4 terminal” on page 34 for more information on this type of signal. • A picture of 625p or 525p signal cannot be displayed as the sub-picture. See “VIDEO-4 terminal” on page 34 for more information on this type of signal. Pay attention to the following. - When the VIDEO-4 picture is a picture of 625p or 525p signal, you cannot choose VIDEO-4 with the p buttons. - When the VIDEO-4 picture signal is changed to 625p, 525p or 1125i signal while the VIDEO-4 picture is displayed as the sub-picture, the PIP function is cancelled. - The pictures cannot be swapped when a picture of 625p or 525p signal from VIDEO-4 is being displayed as the main picture. • The sub-picture cannot be output from the TV. Using the MULTI-PICTURE function You can display multi-pictures that enable you to easily find a program you want to view. 1 Press the X XX X button to display multi-pictures The channels are displayed in the channel number order. The multi-pictures will appear in multi-picture mode. 12-pictures multi: 2 Press the p pp p buttons to choose the screen you want to see The chosen picture changes to a moving picture. 3Press the a aa a button The multi-pictures disappear and the chosen picture appears. Cancelling the multi-pictures: Press the b button, the number buttons or the a button. • Pictures from external devices cannot be displayed in the 12-pictures multi mode. Operating a JVC brand VCR or DVD player You can operate a JVC brand VCR or DVD player. Pressing the button having the same appearance as the original remote control button of a device makes the function work in the same way as the original remote control. 1 Set the VCR/TV/DVD Switch to the VCR or DVD position VCR: When you are operating the VCR, set the switch to the VCR position. You can turn the VCR on or off with the # (Standby) button. DVD: When you are operating the DVD player, set the switch to the DVD position. You can turn the DVD player on or off with the # (Standby) button. 2 Press the VCR/DVD Control Button to control your VCR or DVD player • If your device is not made by JVC, these buttons cannot be used. • Even if your device is made by JVC, some of these buttons or any one of the buttons may not work, depending on the device. • You can use the p buttons to choose a TV channel. The VCR will receive or choose the chapter the DVD player plays back. • Some DVD player models use the p buttons for both operating of Fast forward/backward functions and choosing the chapter. In this case, the 253 buttons do not work. • Set the VCR/TV/DVD switch to the TV position when you turn the TV on or off. „To use D DD D button Some DVDs allow you to select the disc contents using the menu. When you playback these DVDs, you can select the subtitle language and sound-track language, etc. by using the DVD menu. 1Press D DD D button during play back The DVD menu appears on the screen. •Press D button again to resume playback at the scene when you pressed the button. 2Press 6 66 6 or 5 55 5 buttons to select the desired item 3Press a aa a button The menu continues to another screen. Repeat steps 2 and 3 to set additional items if any. D0058-EN Still pictures Moving picture LT-Z32&26S2_Eng.book Page 14 Thursday, December 18, 2003 10:11 AM
15 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Teletext function Basic operation 1 Choose a TV channel with a teletext broadcast 2 Make sure to set the VCR/TV/DVD switch to the TV position. 3 Press g gg g (Text) button to display the teletext Pressing g (Text) button changes the mode as follows: 4 Choose a teletext page by pressing the p pp p p pp p buttons, Number buttons or Colour buttons To return to the TV mode: Press the b button or g (Text) button. • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station. • The ZOOM function will not operate in the TV and text mode or Text mode. • No menu operations are possible when viewing a teletext programme. • Language display depends on the country which was set on the TELETEXT LANGUAGE menu. If characters on a Teletext programme do not appear properly, change the TELETEXT LANGUAGE Setting to other country’s. For detail, “Changing the TELETEXT LANGUAGE setting” on page 28. Using the List Mode You can store the numbers of your favourite teletext pages in memory and call them up quickly using the colour buttons. „To store the page numbers: 1Press B BB B button to engage the List mode The stored page numbers are displayed at the bottom of the screen. 2 Press a Colour button to choose a position. Then press the Number buttons to enter the page number 3 Press and hold down A AA A (Store) button The four page numbers blink white to indicate that they are stored in memory. „To call up a stored page: 1Press the B BB B button to engage the List mode 2 Press a colour button to which a page has been assigned To exit the List mode: Press the B button again. Hold You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the C CC C (Hold) button To cancel the Hold function: Press C (Hold) button again. TEXT---TEXT--- TEXT---TEXT--- D1043 TV mode TV and text mode Text mode Hold indication LT-Z32&26S2_Eng.book Page 15 Thursday, December 18, 2003 10:11 AM
Teletext function 16 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Sub-page Some teletext pages include sub-pages that are automatically displayed. 1 Choose a teletext page that includes sub-pages Sub-page numbers that can be viewed are automatically displayed at the top of the screen. 2 Press the 5 55 5 buttons to choose a sub-page number Reveal Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text. Each time you press the E EE E (Reveal) button, text is hidden or revealed Size You can double the height of the teletext display. Press the F FF F (Size) button. Index You can return to the index page instantly. Press G GG G (Index) button Returns to page 100 or a previously specified page. Cancel You can search for a teletext page while watching TV. 1 Press the Number button to enter a page number, or press a Colour button The TV searches for a teletext page. 2 Press H HH H (Cancel) button The TV programme appears. When the TV finds the teletext page, its page number appears in the upper left of the screen. 3 Press H HH H (Cancel) button to return to a teletext page when the page number is on the screen • The TV mode cannot be resumed even by pressing the H (Cancel) button. A TV programme is temporarily displayed instead of the teletext programme. LT-Z32&26S2_Eng.book Page 16 Thursday, December 18, 2003 10:11 AM
17 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully. Basic operation 1 Press the a aa a button to display the MENU (main menu) •Press the a button twice while watching the MULTI-PICTURE mode. • The display appearing at the bottom of a menu indicates buttons on the remote control you can use when you operate a chosen function. 2 Press the 5 55 5 and 6 66 6 buttons to choose a menu title, and press the a aa a button The menu appears. To return to the previous menu: Press the h (information) button. To exit a menu instantly: Press the b button. 3Press the 6 66 6 buttons to choose a function • For details of the functions in the menus, see the following pages. 4Press the 5 55 5 buttons to choose the setting of that function • If you want to operate a function which appears only with its name, follow the descriptions of that function on the following pages. • The display appearing at the bottom of a menu shows you a button on the remote control that you can use when you operate a chosen function. 5Press the a aa a button to complete the setting The menu disappears. • When watching the television with the NTSC system, the menus are displayed at about half of their normal vertical size. • The menu will be disappear if you press the p p buttons while the menu is displayed. Operation with the buttons on the TV You can also operate the menus using the buttons on the front panel of the TV. The menu will disappear if no operation is performed for approximately one minute. PICTURE SETTING PICTURE FEATURES SOUND SETTINGFEATURES INSTALL BACK MENU TVOK D0013-EN BACKTVOK a button h (Information) button b button MENU/OK button 5 buttons 6 66 6 buttons TV/AV button LT-Z32&26S2_Eng.book Page 17 Thursday, December 18, 2003 10:11 AM
18 LT-Z32/26S2 (ASIA) / LCT1597-001A / English ENGLISH PICTURE SETTING Refer to “Using the TV’s menu” (see page 17) for details of displaying the menu. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharpness. STANDARD: Standardizes picture adjustment. SOFT: Softens contrast and sharpness. Picture Adjustment You can change the picture settings of each PICTURE MODE mode as you like. BRIGHT-1: You can adjust the back light. 2 :darker 3 : brighter CONTRAST: You can adjust the picture contrast. 2 :lower 3 : higher BRIGHT-2: You can adjust the picture brightness. 2 :darker 3 : brighter SHARP: You can adjust the picture sharpness. 2 :softer 3 :sharper COLOUR: You can adjust the picture colour. 2 : lighter 3 : deeper TINT: You can adjust the picture tint. 2 :reddish 3 :greenish • You can change the TINT setting (picture hue) when the colour system is NTSC 3.58, NTSC 4.43 or a signal from the VIDEO-4 terminal. However, operation is not possible when the PIP function main picture is set to VIDEO-4. To return to the default settings in each PICTURE MODE: Press the blue button. • This returns the picture settings in the PICTURE MODE mode you have chosen to the default settings, and stores them in the PICTURE MODE mode. WHITE BALANCE You can select one of three WHITE BALANCE modes (three tones of white) to adjust the white balance of the picture. Since white is the colour which is used as a reference for all the other colours, changing the WHITE BALANCE mode affects the appearance of all the other colours on the screen. COOL: A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. MID: The normal white colour. WARM: A reddish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films. BRIGHT MID PICTURE SETTING BACK TVOKRESET D0014-EN PICTURE MODE BRIGHT-1 CONTRAST BRIGHT-2 SHARP COLOUR TINT WHITE BALANCE LT-Z32&26S2_Eng.book Page 18 Thursday, December 18, 2003 10:11 AM