JVC Lt 26ax5 Instructions

							29
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
SET UP menu
AUTO PROGRAM
You can again perform the AUTO 
PROGRAM function TV channel automatic 
registration which was performed in the 
“Initial settings” (page 8).
1 Choose AUTO PROGRAM, then press the  a or 3 button
The AUTO PROGRAM function starts. 
The TV channels you receive are 
automatically stored in the programme 
numbers list.
• To stop the AUTO PROGRAM  function, press the  b button.
2 After the TV channels have been 
stored in the programme number 
list, the EDIT menu appears • You can proceed to edit the 
programme numbers list using the 
EDIT/MANUAL function. For details, 
see “EDIT/MANUAL” on page 29.
• If a TV channel you want to view is  not stored in the programme numbers 
list, you can regist er it using the 
MANUAL function.
For details, see “EDIT/MANUAL” on 
page 29.
• The AUTO PROGRAM function does  not store a TV channel to the 
programme number PR 0 (AV).
• If you do not need to use the EDIT/ MANUAL function, press the  a 
button to exit the EDIT menu.
• Starting the AUTO PROGRAM  deletes the registered favourite 
channel.
EDIT/MANUAL
The EDIT/MANUAL func tions are divided 
into two types:
• editing the current programme numbers  (PR) (EDIT functions); and 
• manually storing a TV channel you want  to view on a part icular programme 
number (PR) (MANUAL function).
Here are the details  about these functions:
MOVE:
This function changes the programme 
number (PR) of a TV channel.
ID:
This function registers  a channel name (ID) 
to a TV channel.
INSERT:
This function adds a new TV channel in the 
current programme numbers (PR) list by 
using the CH/CC number.
• You cannot use the INSERT function if  you do not know the channel number of a 
TV channel. Use the MANUAL function 
to register a TV channel in the programme 
number (PR).
D0029
SET UP
AUTO PROGRAM
OK
EDIT/MANUAL
LANGUAGE
VIDEO-3 SETTING
TELETEXT LANGUAGE
-EN
VIDEO
CH
>>
14%
D0004
28
AUTO PROGRAM
-EN
>
PR ID
AV21
22
23
24
25
26
D0038
OKDELETEMANUAL
IDMOVEINSERT
CC 01 CH
CH
CH
CH
CH
CH CH/CC
EDIT
02
03
05 04
06
07 01
-EN
Body_Eng.fm  Page 29  Tuesday, August 23, 2005  9:30 AM
 
						

							30
SET UP menu
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
DELETE:
This function deletes a TV channel you do 
not want to list.
MANUAL:
This function manually stores a new TV 
channel in a programme number (PR).
Caution
• Using the MOVE, DELETE or INSERT 
functions rewrites the current 
programme numbers (PR) list. 
Therefore, the programme numbers 
(PR) of some of the TV channels will 
change.
• Using the MANUAL function for a TV 
channel for which the CHANNEL 
GUARD function has been set cancels 
the CHANNEL GUARD function for 
that channel.
• When a TV channel has already been 
registered in PR 99, using the INSERT 
function deletes that TV channel.
„Basic operation
1 Choose EDIT/MANUAL, then press 
the a or 3 button
The EDIT menu appears.
2 Follow the description for the 
function you want to use
3 Press the a button to complete 
the settings
• For programme number PR 0, “AV” 
appears in the programme numbers (PR) 
list.
• A VIDEO terminal number does not 
appear in the programme numbers (PR) 
list.
„MOVE
1 Press the 6 buttons to choose a 
TV channel
2 Press the 3 button to start the 
MOVE function
3 Press the 6 buttons to choose a 
new programme number (PR)
To cancel the MOVE function:
Press the b button.
4 Press the 2 button to change the 
programme number (PR) of a TV 
channel to a new programme 
number (PR)
>
PR ID
AV21
22
23
24
25
26
D0038
OKDELETEMANUAL
IDMOVEINSERT
CC 01 CH
CH
CH
CH
CH
CH CH/CC EDIT
02
03
05 04
06
07 01
-EN
D0030
CH21
>
OK
CH/CC
PR IDAV
01
02
03
04
05
06
07CH
CH
CH
CH
CH
CC22
23
24
25
26
01
STORE
EDIT
-EN
LT-32&26AX5_Eng.book  Page 30  Thursday, August 18, 2005  10:07 AM
 
						

							SET UP menu
31
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
„DELETE
1 Press the 6 buttons to choose a 
TV channel
2 Press the yellow button to delete 
the TV channel
The TV channel is deleted from the 
programme numbers (PR) list.
„ID
1 Press the 6 buttons to choose a 
TV channel
2 Press the red button to start the ID 
function
3 Press the 6 buttons to choose a 
character
4 Press the 5 buttons to move the 
cursor
5 Repeat steps 3 and 4 to complete 
the channel name
6 Press the a button to give a 
channel name (ID) to a TV channel
„INSERT
Before performing INSERT operation
• A CH/CC number unique to this TV and 
corresponding to the Channel number of a 
TV channel is required. Find the 
corresponding CH/CC number from a 
table “CH/CC numbers” on page 35 based 
on the Channel number of the TV 
channel.
1 Press the 6 buttons to choose a 
programme number (PR) for which 
you will register a new TV channel
2 Press the green button and start 
the INSERT function
3 Press the 6 buttons to choose 
“CC” or “CH” according to the CH/
CC number of the TV channel
To cancel the INSERT function:
Press the b button.
4 Press the number buttons to enter 
the remaining CH/CC number
The TV shifts to registration mode. When 
the registration is completed, the picture 
of the TV channel appears on the screen.
• The CH/CC number is a number given 
to each broadcast frequency that 
carries a TV channel. If the TV cannot 
detect the TV channel corresponding 
to the broadcast frequency indicated 
by the CH/CC number, a “no-signal” 
picture appears.
D0032-EN
> EDIT
OK
PR IDAV
01
02
03
04
05
06
07CH
CH
CH
CH
CH
CH21
22
23
24
25
26
CC 01CH/CC
M
D0034
>
CH/CC
PR IDAV
01
02
03
04
05
06
07CH
CH
CH
CH
CH
CH21 
22 
23 
24 
25 
26 
CC
09OKCH/CC
EDIT
-EN
LT-32&26AX5_Eng.book  Page 31  Thursday, August 18, 2005  10:07 AM
 
						

							32
SET UP menu
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
„MANUAL
1 Press the 6 buttons to choose a 
programme number (PR) for a new 
TV channel
2 Press the blue button to activate 
the MANUAL function
At the right side following the CH/CC 
number, the SYSTEM (sound system) of 
the TV channel appears.
To cancel the MANUAL function:
Press the b button.
3 Press the 3 button to choose the 
SYSTEM (sound system) for a TV 
channel you want to register
• For the sound systems in each country 
or region, refer to the table below:
4 Press the green or red button to 
search for a TV channel
Scanning stops when the TV finds a TV 
channel. Then the TV channel is 
displayed.
5 Press the green or red button 
repeatedly until the TV channel you 
want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-
tune the TV channel.
If you cannot hear the normal 
sound even when the picture of the 
TV channel appears normally:
The SYSTEM setting is wrong. Press the 
3 button and choose a SYSTEM that has 
normal sound.
6 Press the a button and register 
the TV channel to a Programme 
number (PR)
The normal EDIT menu is resumed.
Area Country or Region System
Asia, 
Middle 
East Bahrain, Kuwait, Oman, 
Qatar, United Arab Emirates, 
Yemen, etc.
Indonesia, Malaysia, 
Singapore, Thailand, India, 
etc. B/G
China, Vietnam, etc.  D/K
Hong Kong, etc. I
Islamic Republic of Iran, 
Lebanon, Saudi Arabia, etc.B/G
Philippines, Taiwan, 
Myanmar, etc.M
EuropeRussia, etc. D/K
Czech Republic, Poland, etc. D/K
Germany, Holland, Belgium, 
etc.B/G
UK, etc. I
Oceania Australia, New Zealand, etc. B/G
AfricaRepublic of South Africa, etc. I
Nigeria, etc. B/G
Egypt, Morocco, etc. B/G
D0035
>
CH/CC
PR IDAV
01
02
03
04
05
06
07CH
CH
CH
CH
CH
CH21
22
23
24
25
26
OK
CC 01
SYSTEMFINE+FINE-
SEARCH+
SEARCH-
(
B / G)
MANUAL
-EN
LT-32&26AX5_Eng.book  Page 32  Thursday, August 18, 2005  10:07 AM
 
						

							SET UP menu
33
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
LANGUAGE
The LANGUAGE setting which was 
performed in the “Initial settings” (page 8) 
can be changed.
1 Choose LANGUAGE, then press 
the a or 3 button
A sub-menu of the LANGUAGE function 
appears.
2 Press the 6 buttons to choose a 
language. Then press the a 
button
VIDEO-3 SETTING
Set the VIDEO-3 SETTING correctly 
according to the video signal input from the 
external device connected to the VIDEO-3 
terminal. If this setting is incorrect, images 
will not be displayed.
VIDEO:
If a normal video signal (composite video 
signal) is input.
S-VIDEO:
If a S-VIDEO signal (Y/C signal) is input.
• If you set S-VIDEO in VIDEO-3 
SETTING, the display on the screen 
changes from V3 to S3.
TELETEXT LANGUAGE
There are four types of teletext language 
groups. Set the teletext language group that 
corresponds to the language of the teletext 
programme that you want to watch.
1 Choose TELETEXT LANGUAGE, 
then press the a or 3 button
2 Press the 6 buttons to choose a 
group
3 Press the a button to complete 
the setting
The menu disappears.
• Languages that are not included in the 
teletext language group that you select, 
the sub-titles of the teletext programme 
will not be displayed properly.
D1002-EN
LANGUAGE
Group Languages
GROUP-1 Turkish, Hungarian, English, 
German, French, Italian, Spanish, 
Portuguese, Greek, Swedish, 
Finnish
GROUP-2 Polish, Serbian, Croatian, 
Slovenian, Czech, Slovak, 
Rumanian, Hungarian, German, 
French, Italian, Swedish, Finnish
GROUP-3 Russian, Bulgarian, Lettish, 
Lithuanian, Estonian, Ukrainian, 
Serbian, Croatian, Slovenian, 
Czech, Slovak, English, German
GROUP-4 Arabic, Czech, Slovak. Hungarian, 
English, German, French, Italian, 
Spanish, Portuguese, Swedish, 
Finnish
D1003
OK
GROUP-1
>TELETEXT LANGUAGE
GROUP-2
GROUP-3
GROUP-4
-EN
LT-32&26AX5_Eng.book  Page 33  Thursday, August 18, 2005  10:07 AM
 
						

							34
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
Displaying a computer screen
This TV can be used as a computer screen.
Connecting to the computer
Use a D-SUB cable to connect the TV’s PC 
IN terminal to the computer’s analogue RGB 
output terminal.
If you want to listen to the sound from the 
computer, use an audio cable to connect the 
VIDEO-3 AUDIO L/R sound input terminal 
to the computer’s sound output terminal.
When the sound from the computer is mono, 
connect to the VIDEO-3 AUDIO L terminal.
• Refer to the computer manual for a 
detailed explanation of the connections at 
the computer side.
• Ensure that the connectors are facing the 
correct way when connecting.
• After connecting the D-SUB cable, 
tighten the two screws to fix the connector 
in place.
Watching images from a 
computer
After starting the computer, press the 
G or p p buttons to choose “PC”
“PC” is after VIDEO-4.
You can listen to the sound when the 
sound from the computer is connected to 
the VIDEO-3 AUDIO L/R sound input 
terminal.
• When the sound from the computer is 
connected to VIDEO-3, by choosing 
external input VIDEO-3 the sound 
from the computer can be listened to, 
but the images from the computer 
cannot be seen.
Table of signals for each type 
of computer
• Only the above formats are supported.
• Even with the above formats and at 
60 Hz, some problems may be 
experienced depending on the quality of 
the synchronous signal. (Depending on 
the quality, some pictures may not be 
displayed properly.)
• Apple Macintosh
* computers are not 
supported.
When a picture is not displayed
Check the computer’s refresh rate and set it 
to 60 Hz. Refer to the computer’s instruction 
manual.
Computers which cannot have their refresh 
rate set to 60 Hz cannot be used with this 
unit.
* Apple Macintosh is a registered 
trademark of Apple Computer, Inc.
Resolution Vertical 
frequency 
(Hz)Horizontal 
frequency 
(kHz)
640 × 480 
(VGA)60.0 31.5
1024 × 768 
(XGA)60.0 42.0
LT-32&26AX5_Eng.book  Page 34  Thursday, August 18, 2005  10:07 AM
 
						

							35
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
CH/CC numbers
When you want to use the INSERT function on page 31, find the CH/CC number corresponding to 
the Channel number of the TV channel from this table.
US:  The US channel numbers are the channel numbers used in the United States, 
Philippines, etc.
CCIR:  The CCIR channel numbers are the channel numbers used in the Middle East, 
Southeast Asia, etc.
OIRT:  The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, 
Vietnam, etc.
AUSTRALIA:  The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
CHChannel
US CCIR OIRT AUSTRALIA
CH02 US-2 E2 R1 AU-0
CH03 US-3 E3 AU-1
CH04 US-4 E4 R2 AU-2
CH05 US-5 E5 R6 AU-6
CH06 US-6 E6 R7 AU-7
CH07 US-7 E7 R8 AU-8
CH08 US-8 E8 R9 AU-9
CH09 US-9 E9
CH10 US-10 E10 R10 AU-10
CH11 US-11 E11 R11 AU-11
CH12 US-12 E12 R12
CH13 US-13
CH14 US-14,  W+29
CH15 US-15,  W+30
CH16 US-16,  W+31
CH17 US-17,  W+32
CH18 US-18,  W+33
CH19 US-19,  W+34
CH20 US-20,  W+35
CH21 US-21,  W+36 E21
CH22 US-22,  W+37 E22
CH23 US-23,  W+38 E23
CH24 US-24,  W+39 E24
CH25 US-25,  W+40 E25
CH26 US-26,  W+41 E26
CH27 US-27,  W+42 E27
CH28 US-28,  W+43 E28
CH29 US-29,  W+44 E29
CH30 US-30,  W+45 E30
CH31 US-31,  W+46 E31
CH32 US-32,  W+47 E32
CH33 US-33,  W+48 E33
CH34 US-34,  W+49 E34
CH35 US-35,  W+50 E35
CH36 US-36,  W+51 E36
CH37 US-37,  W+52 E37
CH38 US-38,  W+53 E38
CH39 US-39,  W+54 E39
CH40 US-40,  W+55 E40
CH41 US-41,  W+56 E41
CH42 US-42,  W+57 E42
CH43 US-43,  W+58 E43
CH44 US-44,  W+59 E44
CH45 US-45,  W+60 E45
CH46 US-46,  W+61 E46
CH47 US-47,  W+62 E47
CH48 US-48,  W+63 E48
CH49 US-49,  W+64 E49
CH50 US-50,  W+65 E50
CH51 US-51,  W+66 E51
CH52 US-52,  W+67 E52
CH53 US-53,  W+68 E53
CH54 US-54,  W+69 E54
CH55 US-55,  W+70 E55
CH56 US-56,  W+71 E56
CH57 US-57,  W+72 E57
CH58 US-58,  W+73 E58
CH59 US-59,  W+74 E59
CH60 US-60,  W+75 E60
CH61 US-61,  W+76 E61
CH62 US-62,  W+77 E62
CH63 US-63,  W+78 E63
CH64 US-64,  W+79 E64
CH65 US-65,  W+80 E65
CH66 US-66,  W+81 E66
CH67 US-67,  W+82 E67
CH68 US-68,  W+83 E68
CH69 US-69,  W+84 E69CCChannel
US CCIR OIRT AUSTRALIA
CC01 S-1 AU-5
CC02 S-2
CC03 S-3
CC04 S-4
CC05 S-5
CC06 S-6 AU-5A
CC07 S-7
CC08 S-8
CC09 S-9
CC10 S-10
CC11 S-11
CC12 S-12
CC13 S-13
CC14 A S-14
CC15 B S-15
CC16 C S-16
CC17 D S-17
CC18 E S-18
CC19 F S-19
CC20 G S-20
CC21 H S-21
CC22 I S-22
CC23 J S-23
CC24 K S-24
CC25 L S-25
CC26 M S-26
CC27 N S-27
CC28 O S-28
CC29 P S-29
CC30 Q S-30
CC31 R S-31
CC32 S S-32
CC33 T S-33
CC34 U S-34
CC35 V S-35
CC36 W S-36
CC37 W+1 S-37
CC38 W+2 S-38
CC39 W+3 S-39
CC40 W+4 S-40
CC41 W+5 S-41
CC42 W+6
CC43 W+7
CC44 W+8
CC45 W+9
CC46 W+10
CC47 W+11
CC48 W+12
CC49 W+13
CC50 W+14
CC51 W+15
CC52 W+16
CC53 W+17
CC54 W+18
CC55 W+19
CC56 W+20
CC57 W+21
CC58 W+22
CC59 W+23
CC60 W+24
CC61 W+25
CC62 W+26
CC63 W+27
CC64 W+28
CC75 X
CC76 Y R3
CC77 Z R4 AU-3
CC78 Z+1 R5
CC79 Z+2 AU-4
CC95 A-5
CC96 A-4
CC97 A-3
CC98 A-2
CC99 A-1
LT-32&26AX5_Eng.book  Page 35  Thursday, August 18, 2005  10:07 AM
 
						

							36
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
Troubleshooting
If a problem arises while you are using the TV, please read this troubleshooting guide carefully 
before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, 
if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may 
think there is a problem with the TV itself.
Important:
• This troubleshooting guide only covers problems whose causes are not easy to decide. If you 
have a question when you are operating a function, read the page(s) for that function carefully, 
not this troubleshooting guide.
• If you follow the advice in this troubleshooting guide without any success, unplug the mains 
plug and ask for your TV to be repaired. Do not attempt to repair the TV by yourself or to 
remove the rear cover of the TV.
„If you cannot turn on the TV
• Is the mains plug connected to the mains 
outlet?
• Make sure you set the VCR/TV/DVD 
switch to the TV position. You cannot 
turn the TV on when the VCR/TV/DVD 
switch is set to the VCR or DVD position.
„If you cannot turn off the TV
• Make sure you set the VCR/TV/DVD 
switch to the TV position. You cannot 
turn the TV off when the VCR/TV/DVD 
switch is set to the VCR or DVD position.
„No picture or no sound
• Have you chosen a TV channel with very 
poor reception? If so, the BLUE BACK 
function will be activated: the entire 
screen becomes blue, and the sound is 
muted. If you still want to view the TV 
channel, follow the description “BLUE 
BACK” on page 28 to change the BLUE 
BACK function setting to OFF.
• If the SYSTEM setting for a TV channel 
is incorrect, it may prevent the sound 
from being issued. Follow the description 
“EDIT/MANUAL” on page 29 to use the 
MANUAL function to try to change the 
SYSTEM setting.
„Poor picture
• If noise (snow) totally blocks out the 
picture, there may be a problem with the 
aerial or aerial cable. Check the following 
to try to solve the problem:– Have the TV and aerial been connected 
properly?
– Has the aerial cable been damaged?
– Is the aerial pointing in the right 
direction?
– Is the aerial itself faulty?
• If the TV or aerial suffers interference 
from other equipment, stripes or noise 
may appear in the picture. Move any 
equipment such as an amplifier, personal 
computer, or a hair drier, that can cause 
interference away from your TV. Or try 
moving the TV. If the aerial suffers 
interference from a radio tower or high-
voltage wire, please contact your local 
dealer.
• If the TV suffers interference from signals 
reflecting from mountains or buildings, 
double-pictures (ghosting) will occur. Try 
to change the aerial’s direction or replace 
it with one with better directionality.
• Are your COLOUR SYSTEM settings 
correct? Follow the description 
“COLOUR SYSTEM” on page 24 to try 
to solve the trouble.
• Have the COLOUR and BRIGHT settings 
been adjusted properly? Follow the 
description “BRIGHT” and “COLOUR” 
on page 23 to try to adjust them properly.
• Videotaping teletext is not recommended 
because it may not record correctly.
LT-32&26AX5_Eng.book  Page 36  Thursday, August 18, 2005  10:07 AM
 
						

							Troubleshooting
37
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
• When viewing images from commercially 
available video software products, or 
videos from videotapes which have been 
recorded improperly, the top of the image 
may be distorted. This is due to the 
condition of the video signal. There is 
nothing wrong with the TV.
• Since this TV is designed to make full use 
of the resolution of the original video 
source, the motion may appear unnatural 
when the video source is input with 
progressive-scanning component signals.
If this occurs, change the output setting of 
the connected device to interlace-
scanning component signal output. See 
the instructions that came with the device 
for more information.
„Poor sound
• Have you adjusted BASS or TREBLE 
properly? If not, follow the description 
“BASS” or “TREBLE” on page 25.
• When TV channel reception is poor, it can 
be hard to hear stereo or bilingual sound. 
In this case, follow the description 
“STEREO / I • II” on page 25 to hear the 
sound more easily by changing it to a 
mono sound.
„If the TV does not respond to the 
remote control
• Have the batteries of the remote control 
worn out? Follow the description “Putting 
the batteries into the remote control” on 
page 8 and replace them with new batteries.
• Have you attempted to use the remote 
control from the sides or rear of the TV or 
from more than seven metres away from the 
TV? Use the remote control in front of your 
TV or from less than seven metres away.
• When you are viewing a teletext 
programme, you cannot operate the 
menus. Press the b button to return to 
the ordinary TV programme, and then try 
operating the menus.
• If the TV suddenly stops responding, 
disconnect the power cord of the TV from 
the AC outlet. Connect them to the AC 
outlet again to turn on the TV. If the TV 
returns to a normal state, it is not a failure.
„Other issues
• When the SLEEP TIMER function 
operates, the TV is automatically turned 
off. If the TV suddenly turns off, try to 
press the # (standby) button to turn on 
the TV once again. If the TV goes back to 
normal, there is no problem.
• It takes a short period of time from the 
time an operation such as changing 
channels is performed until an image is 
displayed. This is not a fault. This is the 
time needed for the image to stabilise 
before it can be displayed.
• The TV may make a crackling sound due 
to a sudden change in temperature. The 
picture or sound may be normal. If you 
hear crackling sounds frequently while 
you are viewing the TV, there may be 
other causes. As a precaution, ask your 
service technician to inspect it.
• The top of the TV and the screen may 
become hot during use but this has no 
affect on the performance of the TV. 
Make sure that the ventilation holes are 
not blocked.
• When the picture is unstable, the screen 
may become white for a moment. This 
happens when the signal which drives the 
liquid crystal is missing. This is not a 
fault.
• When a still image has been displayed for 
a long period, a faint residual image may 
remain on the screen for a short time after 
the power has been turned off or when 
another image is displayed. This is not a 
fault and the image will eventually 
disappear.
LT-32&26AX5_Eng.book  Page 37  Thursday, August 18, 2005  10:07 AM
 
						

							38
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
Specifications
We may change the design and specifications without notice.
Model LT-32AX5Broadcasting systems B, G, I, D, K, M
Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz
Channels and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz 
VHF high channel (VH) = 175.25 to 463.25 MHz 
UHF channel (U) = 471.25 to 863.25 MHz
• Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 
to S20) and hyper band (S21 to S41).
Sound-multiplex systems NICAM (B/G, I, D/K) system, A2 (B/G, D/K) system
Languages displayed by 
teletext Please see the table in the description “TELETEXT LANGUAGE” on page 33.
Teletext systems FLOF (Fastext), WST (World Standard System)
Power requirements 110 - 240 V AC, 50/60 Hz
Power consumption
[Standby]158 W 
[2.1 W]
Screen size Viewable area 80 cm (measured diagonally)
Audio output Rated Power output: 5 W + 5 W
Speakers 6.6 cm round × 2
VIDEO-1 terminal Euroconnector (21-pin, SCART)
• Video input and Audio L/R inputs are available.
• Monitor outputs (Video and Audio L/R) are available.
VIDEO-2 terminal Euroconnector (21-pin, SCART)• Video input and Audio L/R inputs are available.
• Monitor outputs (Video and Audio L/R) are available.
VIDEO-3 terminal RCA connectors × 3
S-VIDEO connector × 1
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
VIDEO-4 terminal RCA connectors × 3
• Component video (Y, Pb, Pr) input.• Input signal types 
480i/ 50Hz, 480p/ 50Hz, 576i/ 60Hz, 576p/ 60Hz, 720i/ 50Hz, 720p/ 60Hz, 
1080i/ 50Hz, 1080i/ 60Hz.
• Audio L/R input uses the Audio L/R of the VIDEO-3 terminal.
PC IN terminal Analogue RGB D-SUB (15 pin) × 1
• PC signal is available. Refer to page 34 for details of the signals which can be 
input.
• Audio L/R input uses the Audio L/R of the VIDEO-3 terminal.
Headphone jack Stereo mini-jack (3.5 mm in diameter)
Dimensions (W × H × D)
[without stand]820 mm × 604 mm × 308 mm
[820 mm × 551 mm × 127 mm]
Weight
[without stand]20 kg
[16.5 kg]
Accessories Remote control unit × 1 (RM-C1816)
AA/R6 dry cell battery × 2
SCART - RCA cable (for input/output) × 2
LT-32&26AX5_Eng.book  Page 38  Thursday, August 18, 2005  10:07 AM