JVC Lt 26ax5 Instructions
Here you can view all the pages of manual JVC Lt 26ax5 Instructions. The JVC manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
LT-32/26AX5 / LCT1926-001A / All Cover Cover01 WIDE LCD PANEL TVINSTRUCTIONS LT-32AX5 LT-26AX5 ENGLISH LCT1926-001A-H LT-32&26AX5_Eng.book Page 1 Thursday, August 18, 2005 10:07 AM
Page 2
LT-32/26AX5 / LCT1926-001A / All Cover Cover02 LT-32&26AX5_Eng.book Page 2 Thursday, August 18, 2005 10:07 AM
Page 3
1 ENGLISH LT-32/26AX5 / LCT1926-001A / English Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) DO NOT place anything on top of the TV. (such as cosmetics or medicines, flower vases,...
Page 4
2 LT-32/26AX5 / LCT1926-001A / English ENGLISH „Cleaning the screen The screen is coated with a special thin film to reduce reflection. If this film is damaged, uneven colours, discolouration, scratches, and other problems that cannot be repaired may occur. Pay attention to the following when handling the screen. • Do not use glue or adhesive tape on the screen. • Do not write on the screen. • Do not allow the screen to come in contact with any hard objects. • Do not allow condensation to form on the...
Page 5
3 ENGLISH LT-32/26AX5 / LCT1926-001A / English CONTENTS Setting up your TV ...................................4 Installation .................................................. 4 Connecting other devices .......................... 4 Cable holder............................................... 7 Connecting the power cord to the AC outlet....................................................... 8 Putting the batteries into the remote control..................................................... 8 Initial...
Page 6
4 LT-32/26AX5 / LCT1926-001A / English ENGLISH Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is installed on the wall by a skilled installer. Installation Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way. • The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to...
Page 7
Setting up your TV 5 ENGLISH LT-32/26AX5 / LCT1926-001A / English „Connecting the aerial • The connecting cables are not provided. If you are not connecting a VCR/DVD recorder. If you are connecting a VCR/DVD, follow A → B in the diagram below. Aerial 75-ohm Coaxial Cable 75-ohm Coaxial Cable75-ohm Coaxial Cable To Aerial Output To Aerial Input VCR/DVD recorderAerial LT-32&26AX5_Eng.book Page 5 Thursday, August 18, 2005 10:07 AM
Page 8
6 Setting up your TV LT-32/26AX5 / LCT1926-001A / English ENGLISH „Connecting to the VIDEO-1/VIDEO-2 terminal (video input/monitor output) To play the VCR/DVD player: Connect the TV to the VCR/DVD player with the supplied SCART to RCA cable (for input/output). Monitor output from the VIDEO-1/VIDEO-2 terminal The video/sound signal you are viewing is always output from the VIDEO-1/VIDEO-2 terminal. • Changing over a programme number (PR) also changes over the monitor output from the VIDEO-1/VIDEO-2...
Page 9
Setting up your TV 7 ENGLISH LT-32/26AX5 / LCT1926-001A / English „Connecting to the VIDEO-4 terminal (component video input) To play the DVD player: Connect the TV to the VIDEO-4 terminal of the DVD player. • Audio is shared between the VIDEO-3 and VIDEO-4 terminal. „Connecting the PC For details, see “Connecting to the computer” on page 34. Cable holder A cable holder which is used to keep the connection cables tidy is attached to the back of the stand. Gently squeeze the left and right of the cable...
Page 10
8 Setting up your TV LT-32/26AX5 / LCT1926-001A / English ENGLISH Connecting the power cord to the AC outlet Insert the AC plug on the power cord from the TV into AC outlet. Caution • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Remove the AC plug from the outlet to completely disconnect the TV from the power supply. Putting the batteries into the remote control Use two AA/R6 dry cell batteries. Insert the batteries from the - end, making sure the + and -...