JVC Lt 26ax5 Instructions
Have a look at the manual JVC Lt 26ax5 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LT-32/26AX5 / LCT1926-001A / All Cover Cover01 WIDE LCD PANEL TVINSTRUCTIONS LT-32AX5 LT-26AX5 ENGLISH LCT1926-001A-H LT-32&26AX5_Eng.book Page 1 Thursday, August 18, 2005 10:07 AM
LT-32/26AX5 / LCT1926-001A / All Cover Cover02 LT-32&26AX5_Eng.book Page 2 Thursday, August 18, 2005 10:07 AM
1 ENGLISH LT-32/26AX5 / LCT1926-001A / English Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) DO NOT place anything on top of the TV. (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) DO NOT allow objects or liquid into the cabinet openings. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.) DO NOT place any naked flame sources, such as lighted candles, on the TV. DO NOT subject the TV to direct sunlight. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING • Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down. WARNING • The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down. • Do not allow children to hang from the TV, place their elbows on the TV or lean against the TV. Doing so may cause the TV to fall over and lead to injuries. CAUTION • The TV screen may be damaged if the TV is carried as shown in the diagram below. The TV should always be carried by two people. CAUTION: • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Avoid damaging the AC plug and power cord. • When you are not using this unit for a long period of time, it is recommended that you disconnect the power cord from the main outlet. If there is a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. LT-32&26AX5_Eng.book Page 1 Thursday, August 18, 2005 10:07 AM
2 LT-32/26AX5 / LCT1926-001A / English ENGLISH „Cleaning the screen The screen is coated with a special thin film to reduce reflection. If this film is damaged, uneven colours, discolouration, scratches, and other problems that cannot be repaired may occur. Pay attention to the following when handling the screen. • Do not use glue or adhesive tape on the screen. • Do not write on the screen. • Do not allow the screen to come in contact with any hard objects. • Do not allow condensation to form on the screen. • Do not use alcohol, thinner, benzene or other solvents on the screen. • Do not rub the screen hard. Distance recommendations Avoid improper installation and never position the unit where good ventilation is impossible. When installing this TV, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation. Pixel defects LCDs use collections of fine points (“pixels”) to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light, or may light all the time. The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it. 200 mm 200 mm 50 mm 150 mm 150 mm LT-32&26AX5_Eng.book Page 2 Thursday, August 18, 2005 10:07 AM
3 ENGLISH LT-32/26AX5 / LCT1926-001A / English CONTENTS Setting up your TV ...................................4 Installation .................................................. 4 Connecting other devices .......................... 4 Cable holder............................................... 7 Connecting the power cord to the AC outlet....................................................... 8 Putting the batteries into the remote control..................................................... 8 Initial settings ............................................. 8 TV buttons and functions ......................10 Turn the TV on from standby mode ......... 10 Choose a TV channel .............................. 10 Watch images from external devices ....... 10 Adjust the volume .................................... 11 Using the Menu ........................................ 11 Connecting headphones .......................... 11 Using the stand ........................................ 11 Remote control buttons and functions..............................................12 Turn the TV on or off from standby mode.. 12 Choose a TV channel and watch images from external devices ........................... 13 Adjust the volume .................................... 14 Information function ................................. 14 ZOOM function......................................... 15 3D SOUND function ................................. 16 Return to TV channel instantly ................. 16 Favourite channel function ....................... 17 Operating a JVC brand VCR or DVD player.................................................... 18 Teletext function ....................................19 Basic operation ........................................ 19 Using the List Mode ................................. 19 Hold.......................................................... 20 Sub-page ................................................. 20 Reveal ...................................................... 20 Size .......................................................... 20 Index ........................................................ 21 Cancel ...................................................... 21 Using the TV’s menu..............................22 Basic operation ........................................ 22 PICTURE menu ...................................... 23 PICTURE MODE...................................... 23 BACK LIGHT ............................................ 23 CONTRAST ............................................. 23 BRIGHT.................................................... 23 SHARP ..................................................... 23 COLOUR .................................................. 23 TINT ......................................................... 23 WHITE BALANCE .................................... 23 FEATURES .............................................. 24 SOUND menu ......................................... 25 STEREO / I • II ......................................... 25 BASS........................................................ 25 TREBLE ................................................... 25 BALANCE ................................................ 25 3D SOUND............................................... 25 FEATURES menu ................................... 26 SLEEP TIMER ......................................... 26 CHANNEL GUARD .................................. 26 APPEARANCE......................................... 28 BLUE BACK ............................................. 28 FAVOURITE SETTING ............................ 28 SET UP menu ......................................... 29 AUTO PROGRAM.................................... 29 EDIT/MANUAL ......................................... 29 LANGUAGE ............................................. 33 VIDEO-3 SETTING .................................. 33 TELETEXT LANGUAGE .......................... 33 Displaying a computer screen.............. 34 Connecting to the computer ..................... 34 Watching images from a computer .......... 34 Table of signals for each type of computer............................................... 34 CH/CC numbers ..................................... 35 Troubleshooting .................................... 36 Specifications ........................................ 38 LT-32&26AX5_Eng.book Page 3 Thursday, August 18, 2005 10:07 AM
4 LT-32/26AX5 / LCT1926-001A / English ENGLISH Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is installed on the wall by a skilled installer. Installation Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way. • The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow satisfactory cooling. See “Distance recommendations” on page 2. Connecting other devices Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method. • Turn off all the equipment including the TV. • The “Specifications” on page 38 give the details of the VIDEO terminals. * Monitor output: Output the images and sounds you are viewing. without terminal covers [VIDEO-4] Component video input [VIDEO-3] S-VIDEO input Video input Audio L/R input[VIDEO-2] Video input Audio L/R input Monitor output*[VIDEO-1] Video input Audio L/R input Monitor output*Aerial input PC inputRemoving the terminal cover LT-32&26AX5_Eng.book Page 4 Thursday, August 18, 2005 10:07 AM
Setting up your TV 5 ENGLISH LT-32/26AX5 / LCT1926-001A / English „Connecting the aerial • The connecting cables are not provided. If you are not connecting a VCR/DVD recorder. If you are connecting a VCR/DVD, follow A → B in the diagram below. Aerial 75-ohm Coaxial Cable 75-ohm Coaxial Cable75-ohm Coaxial Cable To Aerial Output To Aerial Input VCR/DVD recorderAerial LT-32&26AX5_Eng.book Page 5 Thursday, August 18, 2005 10:07 AM
6 Setting up your TV LT-32/26AX5 / LCT1926-001A / English ENGLISH „Connecting to the VIDEO-1/VIDEO-2 terminal (video input/monitor output) To play the VCR/DVD player: Connect the TV to the VCR/DVD player with the supplied SCART to RCA cable (for input/output). Monitor output from the VIDEO-1/VIDEO-2 terminal The video/sound signal you are viewing is always output from the VIDEO-1/VIDEO-2 terminal. • Changing over a programme number (PR) also changes over the monitor output from the VIDEO-1/VIDEO-2 terminal. • The PC signal cannot be output. • Teletext programmes cannot be output. „Connecting to the VIDEO-3 terminal (S-VIDEO or video input) To play the VCR/DVD player: Connect the TV to the VIDEO-3 terminal of the VCR/DVD player. • You can choose between an S-VIDEO signal (Y/C signal) and a normal video signal (composite signal). For details of how to operate the equipment, see “VIDEO-3 SETTING” on page 33. • You can also connect game consoles and camcorder. VCR/DVD recorderSCART to RCA Cable (for input/output) VIDEO IN AUDIO IN-L AUDIO IN-R To OUTPUT Outputs the images and sounds you are viewing. To INPUTVIDEO OUT AUDIO OUT-L AUDIO OUT-R VCR/DVD player To OUTPUT To OUTPUT S-VIDEO IN VIDEO IN AUDIO IN-L AUDIO IN-R Game consoles/Camcoder LT-32&26AX5_Eng.book Page 6 Thursday, August 18, 2005 10:07 AM
Setting up your TV 7 ENGLISH LT-32/26AX5 / LCT1926-001A / English „Connecting to the VIDEO-4 terminal (component video input) To play the DVD player: Connect the TV to the VIDEO-4 terminal of the DVD player. • Audio is shared between the VIDEO-3 and VIDEO-4 terminal. „Connecting the PC For details, see “Connecting to the computer” on page 34. Cable holder A cable holder which is used to keep the connection cables tidy is attached to the back of the stand. Gently squeeze the left and right of the cable holder and pull it to remove it from the stand. After putting the cables in the cable holder, attach it to the back of the stand again. DVD player To OUTPUT COMPONENT INAUDIO IN-L AUDIO IN-R cable holder LT-32&26AX5_Eng.book Page 7 Thursday, August 18, 2005 10:07 AM
8 Setting up your TV LT-32/26AX5 / LCT1926-001A / English ENGLISH Connecting the power cord to the AC outlet Insert the AC plug on the power cord from the TV into AC outlet. Caution • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Remove the AC plug from the outlet to completely disconnect the TV from the power supply. Putting the batteries into the remote control Use two AA/R6 dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. • The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to. Initial settings When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings. 1 Make sure to set the VCR/TV/DVD switch on the remote control to the TV position • You cannot turn the TV on when the VCR/TV/DVD switch is set to the DVD position. 2 Press the # button on the remote control The TV turns on from standby mode and the JVC logo is displayed. • Check that the AC plug on the power cord from the TV is connected to AC outlet. Yellow button Blue button 7 button s # button VCR/TV/DVD switch Remote control sensorPower lamp LT-32&26AX5_Eng.book Page 8 Thursday, August 18, 2005 10:07 AM