JVC Lt 26ax5 Instructions

							Setting up your TV
9
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
• If the JVC logo does not appear this is 
because your TV has already been 
turned on for the first time: 
use the “LANGUAGE”, “TELETEXT 
LANGUAGE” and “AUTO 
PROGRAM” functions to make the 
initial settings. For details, see “SET 
UP menu” on page 29.
3 Press the a button
The LANGUAGE menu appears.
4 Press the 6 buttons to choose 
ENGLISH. Then press the a 
button
The TELETEXT LANGUAGE menu 
appears. Set the teletext language group 
that corresponds to the language of the 
teletext programme that you want to watch. 
For details, see “TELETEXT 
LANGUAGE” on page 33.
5 Press the 6 buttons to choose a 
group. Then press the a button
The AUTO PROGRAM function starts. 
The TV channels you receive are 
automatically stored in the programme 
numbers (PR) list.
• To stop the AUTO PROGRAM 
function, press the b button.
6 After the TV channels have been 
registered in the programme 
numbers (PR), the EDIT menu 
appears
• You can proceed to edit the 
programme numbers (PR) list using 
the EDIT/MANUAL function. For 
details, see “EDIT/MANUAL” on 
page 29.
• If a TV channel you want to view is 
not stored in the programme numbers 
(PR) list, you can register it using the 
MANUAL function. For details, see 
“EDIT/MANUAL” on page 29.
• The AUTO PROGRAM function does 
not store a TV channel to the 
programme number PR 0 (AV).
• If you do not need to use the EDIT/
MANUAL function, press the a 
button to close the EDIT menu.
Now, setting up is complete. Please 
enjoy your new JVC TV!
D1003
OK
GROUP-1
>TELETEXT LANGUAGE
GROUP-2
GROUP-3
GROUP-4
-EN
CH >>
14%
D0004
28 AUTO PROGRAM
-EN
>
PR ID
AV21
22
23
24
25
26
D0038
OKDELETEMANUAL
IDMOVEINSERT
CC 01 CH
CH
CH
CH
CH
CH CH/CC EDIT
02
03
05 04
06
07 01
-EN
LT-32&26AX5_Eng.book  Page 9  Thursday, August 18, 2005  10:07 AM
 
						

							10
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
TV buttons and functions
Refer to the pages in parentheses for details.
1Remote control sensor
2Power lamp (page 8)
3TV/AV button (page 10)
4MENU/OK button (pages 11, 22)
5P p buttons (page 10)
6r (Volume) q buttons (page 11)
7A (Stand by) button (page 10)
8Headphone jack (mini jack) (page 11)
Turn the TV on from standby 
mode
Press the A button or the P p 
buttons to turn the TV on from 
standby mode.
When the TV is turned on, the power lamp 
lights blue.
To turn the TV off:
Press the A button again.
The power lamp goes off.
Caution
•The A button on the TV does not fully 
isolate the TV from the AC supply. If 
you are not going to use the TV for a 
long period, be sure to disconnect the 
AC plug from the AC socket.
Choose a TV channel
Press the P p buttons to choose a 
programme number (PR)
Watch images from external 
devices
Press the TV/AV button to choose a 
VIDEO terminal
•The p p buttons can also be used to 
choose a VIDEO terminal.
TV mode VIDEO modes
Last 
Programme 
number
or
LT-32&26AX5_Eng.book  Page 10  Thursday, August 18, 2005  10:07 AM
 
						

							TV buttons and functions
11
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
Adjust the volume
Press the r (Volume) q buttons
The volume level indicator appears.
Using the Menu
Use the MENU/OK button
Refer to “Using the TV’s menu” (see 
page 22) for details of using the menu.
Connecting headphones
Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone 
jack at the TV front panel.
• No sound comes from the TV speakers 
when the headphones are connected.
Using the stand
This stand can be used to adjust the direction 
of the TV screen 5° up, 10° down, and 20° to 
the left or right.
„Tilt the TV up and down:
„Rotate the TV to the left and right:
LT-32&26AX5_Eng.book  Page 11  Thursday, August 18, 2005  10:07 AM
 
						

							12
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
Remote control buttons and functions
1Muting button
2Number buttons
3Information button
4c button
5/ (3D SOUND) button
6b button
77 buttons
8g (Text) button
9p p buttons
0VCR/DVD/Teletext control buttons
-p buttons
=d (Favourite) button
~# (Standby) button
!VCR/TV/DVD switch
@G button
#Colour buttons
$H button
%a button
^b button
&r (Volume) q buttons
Turn the TV on or off from 
standby mode
Press the # (standby) button to turn 
the TV on or off
When the TV is turned on, the power lamp 
lights blue.
• The power can be turned on by pressing 
the b button, p p buttons or Number 
buttons.
~
!
0 3
4
5
9 6
7
8
-$@
& #
%
^ 1
2
=
To turn the TV on or off, set the VCR/TV/
DVD switch on the remote control to the 
TV position and press the # button.
If the VCR/TV/DVD switch on the remote 
control is set to the DVD position, the TV 
will not be turned on or off even if the # 
button is pressed.
LT-32&26AX5_Eng.book  Page 12  Thursday, August 18, 2005  10:07 AM
 
						

							Remote control buttons and functions
13
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
Choose a TV channel and 
watch images from external 
devices
„Use the number buttons:
Enter the programme number (PR) 
of the channel using the number 
buttons.
Example:
•PR 6 → press 6
• PR 12 → press 1 and 2
„Use the p p buttons:
Press the p p buttons to 
choose the programme number 
(PR) you want or an VIDEO 
terminal.
„Use the G button:
Press the G button to choose an 
VIDEO terminal.
• You can choose a video input signal from 
the S-VIDEO signal (Y/C signal) and 
regular video signal (composite signal). 
For details, see “VIDEO-3 SETTING” on 
page 33.
• If you do not have a clear picture or no 
colour appears, follow the operation 
procedure “COLOUR SYSTEM” on 
page 24.
• If you choose a VIDEO terminal with no 
input signal, the VIDEO terminal number 
becomes fixed on the screen.• Since this TV is designed to make full use 
of the resolution of the original video 
source, the motion may appear unnatural 
when the video source is input with 
progressive-scanning component signals.
If this happens, change the output setting 
of the connected device to interlace-
scanning component signal output. See 
the instructions that came with the device 
for more information.
• The PC sound is the same as the VIDEO-3 
sound.
To return to a TV channel:
Press the b button, the p p buttons or 
the number buttons.
To use the programme number PR 0 
(AV):
When the TV and VCR/DVD recorder are 
connected only by the aerial cable, choosing 
the programme number PR 0 (AV) allows 
you to view images from the VCR/DVD 
recorder. Set the VCR/DVD recorder RF 
channel to the programme number PR 0 
(AV) manually. For details, see “EDIT/
MANUAL” on page 29.
Pressing the G button changes the choice as 
follows:
• The VCR/DVD recorder sends its 
playback image along the aerial cable as 
an RF (radio frequency) signal.
• Also see your VCR/DVD recorder 
instruction manual.
TV mode VIDEO modes
Programme 
numbers 
PR 1 – PR 99
or
TV mode VIDEO modes
Programme 
numbers 
PR 1 – PR 99PR 0
or
LT-32&26AX5_Eng.book  Page 13  Thursday, August 18, 2005  10:07 AM
 
						

							14
Remote control buttons and functions
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
Adjust the volume
Press the r q buttons to adjust 
the volume.
The volume level indicator appears and the 
volume changes as you press the r q 
buttons.
„Muting the sound
Press the 
l (muting) button to 
turn off the sound.
Pressing the 
l (muting) button again 
restores the previous volume level.
Information function
You can see the channel number of the 
programme you are watching or the PR 
LIST.
From the PR LIST, you can choose a channel 
or VIDEO terminal.
Press the 
h (Information) button to 
display the information you want to 
see.
Pressing the 
h (Information) button changes 
the display as follows:
Channel number display:
The channel number and channel name 
(when the channel name is registered) of the 
programme you are watching or the VIDEO 
terminal number is displayed.PR LIST:
The programme number (PR) and VIDEO 
terminal list is displayed.
Pressing the a button after choosing the 
programme number (PR) or VIDEO terminal 
with the 7 buttons will display the 
chosen programme or VIDEO terminal.
• For programme numbers (PR) for which 
the CHANNEL GUARD function is set, 
the n (CHANNEL GUARD) mark is 
displayed. For details see “CHANNEL 
GUARD” on page 26.
• For programme numbers (PR) which is 
registered as a favourite channel, the d 
(favourite) mark is displayed. For details 
see “Favourite channel function” on 
page 17.
PR ID
AV
01
02
03
04
05
06
07
D0011
PR LIST
OK
-EN
+8
-8
No indication Channel number display
LT-32&26AX5_Eng.book  Page 14  Thursday, August 18, 2005  10:07 AM
 
						

							Remote control buttons and functions
15
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
ZOOM function
You can change the screen size according to 
the picture aspect ratio. Choose the optimum 
one from the following ZOOM modes.
• The ZOOM mode is fixed at FULL when 
you are using the TV as a PC screen.
REGULAR:
Use to view a normal picture (4:3 aspect 
ratio) as this is its original shape.
PANORAMIC:
This stretches the left and right sides of a 
normal picture (4:3 aspect ratio) to fill the 
screen, without making the picture appear 
unnatural.
• The top and bottom of the picture are 
slightly cut off.
14:9 ZOOM:
This zooms up the wide picture (14:9 aspect 
ratio) to the upper and lower limits of the 
screen.
16:9 ZOOM:
This zooms up the wide picture (16:9 aspect 
ratio) to the full screen. 
16:9 ZOOM SUBTITLE:
This zooms up the wide picture (16:9 aspect 
ratio) with subtitles to the full screen. FULL:
This uniformly stretches the left and right 
sides of a normal picture (4:3 aspect ratio) to 
fill the wide TV screen.
• For 16:9 aspect ratio pictures that have 
been squeezed into a normal picture (4:3 
aspect ratio), use the FULL mode to 
restore the picture to its original shape.
„Choose the ZOOM mode
1 Press the c button to display 
the ZOOM menu
2 Press the 6 buttons to choose a 
ZOOM mode. Then press the a 
button
The picture expands and the chosen 
ZOOM mode is displayed in about 5 
seconds.
REGULAR
D0009
ZOOM
OK
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
-EN
LT-32&26AX5_Eng.book  Page 15  Thursday, August 18, 2005  10:07 AM
 
						

							16
Remote control buttons and functions
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
„Adjusting the visible area of the 
picture
If subtitles or the top (or bottom) of the 
picture are cut off, you can adjust the visible 
area of the picture manually.
1 Press the c button
The ZOOM menu appears.
2 Press the a button to display the 
ZOOM mode indicator
The indicator appears.
3 While it is displayed, press the 6 
buttons to change the position of 
the picture
• You cannot adjust the visible area in 
REGULAR or FULL mode.
The visible area adjustment is saved even 
after the TV channel is changed.
However, it is cancelled if the following 
operations are performed.
• The power is turned off/on
•g (Text) button is pressed
• The TV is switched between TV mode 
and VIDEO mode
3D SOUND function
You can enjoy sounds with a wider 
ambience.
• This function does not work for the sound 
from headphones.
Press the 3 button to select one of 
3D SOUND modes
ON:
When you listen to stereo sound, please 
select ON mode.
You can enjoy sound similar to the 
experience at the theatre.MONO:
Select the MONO mode, when you listen to 
the mono sound.
You can enjoy the sound for a wider 
audience similar to stereo sound.
OFF:
The 3D SOUND function switches off.
• You can choose the 3D SOUND mode 
with the “SOUND menu” (see page 25).
Return to TV channel instantly
You can return to a TV channel instantly.
Press the b button
The TV returns to the TV mode and a TV 
channel appears.
16 : 9   ZOOMD0010-EN
LT-32&26AX5_Eng.book  Page 16  Thursday, August 18, 2005  10:07 AM
 
						

							Remote control buttons and functions
17
ENGLISH
LT-32/26AX5 / LCT1926-001A / English
Favourite channel function
You can register your favourite TV channels 
(PR 1 – PR 99) in the number buttons 1 to 4.
After registering, the channel can be called 
by pressing the d (favourite) button and a 
number button 1 to 4.
„Favourite channel registration
1 In the normal screen, choose a TV 
channel (PR 1 – PR 99) that you 
want to register
For details, refer to “Choose a TV channel 
and watch images from external devices” 
on page 13.
2 Press and hold the d (favourite) 
button for three seconds or more
Then “SET 1-4?” appears on the screen.
3 Press one of the number buttons 1 
to 4
The current channel is registered in the 
pressed number button.
After “PROGRAMMED!” appears on the 
screen, the favourite channel icon appears 
at the top-right of the screen.
• If the channel you are trying to register 
is already registered in one of the other 
number buttons 1 to 4, “NOT 
AVAILABLE” appears on the screen.
• Channels locked with the CHANNEL 
GUARD function cannot be registered.
• If AUTO PROGRAM is performed, 
the registered favourite channels are 
reset.
• When you want to delete a favourite 
channel, delete the set channel and set 
contents with FAVOURITE SETTING 
(see page 28) in the FEATURES menu.
„Calling the favourite channel
1 In the normal screen, press the d 
(favourite) button
Then “FAVOURITE1-4?” appears.
2 Press one of the number buttons 1 
to 4
The called favourite channel appears on 
the screen.
• If a number button in which no 
channel is registered is pressed, “NO 
MEMORY” appears on the screen.
„Setting the picture effect
When a favourite channel has been chosen 
with the d (favourite) button and number 
buttons 1 to 4, picture effect settings can be 
memorised for each favourite channel by 
setting the picture effects in the PICTURE 
menu (see page 23).
The following items in the PICTURE menu 
(see page 23) are memorised.
PICTURE MODE
BACK LIGHT
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
WHITE BALANCE
DIGITAL VNR
COLOUR SYSTEM
The last setting made for each item is 
memorised.
LT-32&26AX5_Eng.book  Page 17  Thursday, August 18, 2005  10:07 AM
 
						

							18
Remote control buttons and functions
LT-32/26AX5 / LCT1926-001A / English
ENGLISH
Operating a JVC brand VCR or 
DVD player
These buttons will operate a JVC brand VCR 
or DVD player. Pressing a button that looks 
the same as the device’s original remote 
control button has the same effect as the 
original remote control.
1 Set the VCR/TV/DVD switch to the 
VCR or DVD position
VCR:
When you are operating the VCR, set the 
switch to the VCR position.
• You can turn the VCR on or off with 
the # (standby) button.
DVD:
When you are operating the DVD player, 
set the switch to the DVD position.
• You can turn the DVD player on or off 
with the # (standby) button.
• You can also press the H or 
T button and display the 
DVD disc menu screen, and then 
operate by pressing the 7 
buttons.
2 Press the VCR/DVD Control Button 
to control your VCR or DVD player
• If your device is not made by JVC, 
these buttons will not work.
• Even if your device is made by JVC, 
some of these buttons may not work, 
depending on the device you are using.
• You can use the p buttons to choose 
a TV channel the VCR will receive, or 
choose the chapter the DVD player 
plays back.
• Some models of DVD player use the 
p buttons for both operating the fast 
forward/backward functions and for 
choosing the chapter. In this case, the 
253 buttons do not work.
You cannot turn the TV on or off when the 
VCR/TV/DVD switch is set to the VCR or 
DVD position.
When you turn the TV on or off, set the 
VCR/TV/DVD switch to the TV position.
LT-32&26AX5_Eng.book  Page 18  Thursday, August 18, 2005  10:07 AM