JVC Gz Mg 130e Manual

EN11
GETTING 
STARTED
Camcorder
 Touch Sensor OK Button MENU Button  Power (1) Button  SD Card Slot ( pg. 18)	 EXPORT Button
 AV Connector UPLOAD Button ( pg. 36)  PLAY/REC Button ( pg. 19, 20, 22, 23)
  Mode Switch [, ] DIRECT DVD Button ( pg. 28)
 INFO Button ( pg. 21)
 START/STOP Button ( pg. 19) SNAPSHOT Button ( pg. 20)
Zoom Lever [W 
, T]  ( pg. 21) 
Speaker Volume Control
 Speaker DC Connector   USB Connector ( pg. 27, 30)
 Camera Sensor  LED Light ( pg. 21) Lens...

EN12
 
AC Adapter
AP-V20U/AP-V14U*Battery Pack
BN-VF808UAudio/Video 
CableRemote Control
RM-V751U
USB Cable CD-ROM Core Filter (x2)
Lithium Battery
CR2025
Pre-installed in the
remote control unit.
NOTEMake sure to use the provided cables for connections. Do not use any other cables.
* AP-V14U is not mentioned in the GUIDEBOOK in the supplied CD-ROM.
Attaching the Core Filter
The core filter reduces interference caused when connecting to other devices. 
Preparing the Remote Control
A battery is included...

EN13
GETTING 
STARTED
During both Video and Still Image 
Recording
WT01/4000
LCDNOV. 1. 2009 
SD
4:55 PM 
  Selected Operation Mode Indicator 
( pg. 24)
 : Auto Mode : Manual Mode
  Effect Mode Indicator
  Tele Macro Mode Indicator
  LED Light Indicator ( pg. 21)
  Scene Select Mode Indicator
	
Quick Review Indicator ( pg.19, 20)

  Zoom Indicator ( pg. 21)
  Recording Medium Indicator
SD : SD Card : Built-in memory
  White Balance Indicator

  Monitor Backlight Indicator 
 Battery...

EN14
During Video  Playback
+4
8
SD
1: 55 : 01
NOV. 1. 2009 4:55 PM 
 Mode Indicator
  Playlist Playback Indicator (Appears when 
playing back a playlist.) 
 Video Quality:
 
# (ULTRA FINE), $ (FINE), % (NORMAL), & (ECONOMY) 
 Counter
 Playback Mode
: Playback2: Pause,: Forward Search+: Reverse Search(: Forward Slow-Motion&: Reverse Slow-Motion
(The number on the left shows speed.)
	 Battery Indicator

 Date/Time ( pg. 16)
  Volume Level Indicator
During Still Image Playback
SD
101- 0098
NOV. 1....

EN15
GETTING 
STARTED
   
 
Charging the Battery Pack
1Close the LCD monitor to turn off the 
camcorder.
2Attach the battery pack, then 
connect the AC adapter.
vv” (arrow) on the battery pack 
pointing at the correct direction, slide the 
battery pack until it locks in place.
DC
 The power/charge lamp blinks to indicate 
charging has started.
 When the lamp goes out, charging is 
finished.
- To check the remaining battery power
See page 21.
- Required charging/recording time
  (approx.)
*When the LED...

EN16
   
 
 
 
 
Date/Time Setting
1Open the LCD monitor to turn on the 
camcorder.
2Touch MENU.
3Select [DISPLAY SETTINGS].
CONFIGURE ON-SCREEN DISPLAY
VIDEO
WIND CUT
AUTO SWITCH REC MEDIA
>>DISPLAY SETTINGS>BASIC SETTINGS
SETQUIT
4Select [CLOCK ADJUST].
DISPLAY SETTINGS
SET DATE AND TIMELANGUAGE
CLOCK ADJUST
DATE DISPLAY STYLE
MONITOR BRIGHT
SETQUIT
5Select [CLOCK SETTING].
CLOCK ADJUST
SET THE CITY, DATE AND TIME
CLOCK SETTINGAREA SETTINGSET FOR DAYLIGHT SAVING TIME
SETQUIT
6Select the city closest to...

EN17
GETTING 
STARTED
   
Tripod Mounting
Align the camcorder stud hole with the tripod
stud, and the mounting socket with the screw,
and then rotate the camcorder clockwise to
mount it to the tripod.
NOTEDo not use a tripod on unsteady or unlevel 
surfaces. It could tip over, causing serious 
damage to the camcorder.
Bottom of the 
Camcorder
    Language Setting
The language on the display can be changed.
1Open the LCD monitor to turn on the 
camcorder.
2Touch MENU.
3Select [DISPLAY SETTINGS].
CONFIGURE...

EN18
   
 
Using an SD Card
If you want to record to an SD card, the 
following operations need to be performed.
 Operations are confirmed on the following 
SD cards: Class 4 or higher compatible 
SD or SDHC card Panasonic, TOSHIBA, 
SanDisk, ATP SD card (256 MB to 2 GB) or 
SDHC card (4 GB to 32 GB).
 If other media are used, they may fail to 
record data correctly, or they may lose data 
that had already been recorded.
 MultiMediaCards are not supported. Cards used to record video on this 
camcorder...

EN19
RECORDING/
PLAYBACK
  Recording Files
 
 
Video Recording
Press the PLAY/REC button to 
select recording mode.
PLAY/REC
Press the START/STOP button to 
start recording.
[4 h 59 m]
0:00:01 REC
Approximate remaining time 
for recording appears.
You can also start/stop recording by 
selecting [REC] on the LCD monitor.
(On-screen recording control).
- To stop recording
Press the START/STOP again.
- To view the last recorded scene
Select  while recording is paused.
Selecting  during playback deletes...

EN20
Recording Files  (Continued)
 
 
Still Image Recording
Slide the mode switch to select  (still image) mode.
Press the PLAY/REC button to 
select recording mode.
PLAY/REC
Press and hold the SNAPSHOT 
button halfway.
FINE
The   indicator becomes green when 
the captured image is focused.
Press the SNAPSHOT button fully 
to take the photo/picture.
FINE  [9999]PHOTO
NOTE
 DIS (Digital Image Stabilizer) does not function during still image recording. If the camcorder is not operated for 5 minutes while...