JVC GZ-EX555 User Manual

Wi-Fi Specifications
Wi-Fi SpecificationsItemDetailsWireless LAN StandardIEEE802.11b/g/n (2.4GHz band)Wi-Fi securityEncryption: WEP, WPA, WPA2
*WPA and WPA2 are supported only by the personal mode (PSK).
DIRECT MONITORING / INDOOR MONITORING / OUTDOOR MONITORING
o When Using Everio sync. 2
ItemDetailsSupported TerminalsiPhone/iPad/iPod touch: iOS 5.1 or later
Android: Android 2.3 or later
0 There is no guarantee that the operations will work with all terminals.
0 “Everio sync. 2” for iPhone/iPad cannot...

AudioAAC 48kHz 16 bits 2chTimeMax. 15 seconds
DETECT/MAIL
ItemDetailsStill Image TransmissionJPEG 640x360Using Wi-Fi (GZ-EX555/GZ-EX515)182 

DIRECT MONITORING
You can monitor images being captured by Everio to your smartphone or
PC. While you are busy, you can monitor your baby who is sleeping in the room next door.INDOOR MONITORING
Images being captured by Everio can be set to your PC or smartphone when
your children return home, via the wireless LAN router.
OUTDOOR MONITORING
Images being captured by Everio can be sent to the grandparents’ PC or
smartphone, by the wireless LAN (Wi-Fi spot) via the Internet.
DETECT/MAIL
When your child...

DIRECT MONITORING
o Setting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.
o Enter values in the required items for direct monitoring.
0 Password: set a password to connect this camera to the device by direct
monitoring. (8 to 63 characters (64 characters in case of hexadecimal))
0 Enforced Group Owner: setting used to enable a connection with a device
that does not support Wi-Fi Direct. Normally set to “ON”.
0 HTTP Port: Normally set to “80”.
Display the screen for...

oRegular Operation
Connecting the Smartphone to the Camera Wirelessly
o Connection by entering the Wi-Fi password
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
4Tap “START” ( I).
(Operation on this camera)
.
0When iFrame is selected for “VIDEO REC FORMAT”, the following
display appears and recording...

.
4Tap “START” ( I).
(Operation on this camera)
.
0When iFrame is selected for “VIDEO REC FORMAT”, the following
display appears and recording mode is switched to the 60i mode in
AVCHD.
0 This display disappears automatically after approximately 3 seconds,
but disappears immediately if the screen is tapped.
.
5Tap “WPS”.
(Operation on this camera)
.
6Activate WPS on the smartphone (or computer) within 2 minutes.
(Operation on the smartphone (or computer))
.
0To activate WPS, refer to the instruction...

.
4Operate from a smartphone
.
0How to operate from a smartphone
“Using Smartphone Applications” ( A p. 161)
o Computer (Windows 7)
1
Tap the URL button shown on the camera’s screen.
(displayed when the computer and the camera are connected
wirelessly.)
.
0The URL for the computer to connect to appears.
2 Check the URL displayed on the camera screen, which starts from
“http://”.
.
0After checking the URL, tap “QUIT” to return to the previous screen.
3 Start Internet Explorer (web browser) on the computer...

INDOOR MONITORING
o Setting (Once setting is done, start from the “Regular
Operation” below)
Create a QR code.
o Enter values in the required items for indoor monitoring.
0 Password: set a password to connect this camera to the device via an
access point. (Not more than 8 characters)
0 HTTP Port: Normally set to “80”.
Display the screen for reading the QR code.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower...

.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8 Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use....

.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping...