JVC GZ-EX555 User Manual

3Tap “VIDEO MAIL” ( L).
.
4 Tap “VIDEO MAIL ADDRESS”.
.
5Select “VIDEO MAIL ADDRESS”, then tap  J.
.
0 To display the  L icon, tap the e-mail address.
0 To cancel the e-mail address, press the icon one more time.
0 Up to 8 e-mail addresses can be selected.
6 Tap “START” ( I).
.
7 Press the START/STOP button to start recording.
.
0Or, tap the REC on screen.
8 Recording starts after the 5-second countdown.
0 Recording starts immediately after pressing the START/STOP button
again during the countdown.
....

Image Monitoring on TV (TV MONITORING)
You can connect this unit to a DLNA compatible TV wirelessly to playback still images on this unit on the TV screen. (This function may not be available
depending on the DLNA device in use.)
Connect via access point (wireless LAN router) at home.
What You Need
0 DLNA compatible device
0 Wireless LAN router (use a product that has a Wi-Fi certification logo)
Settings Required in Advance
1 Connect the camera to the access point (wireless LAN router). “Registering the...

0If the DLNA compatible TV in use cannot detect Everio, tap “STOP” to start
from the step 1 again.Caution : 
0 This function is not designed for disaster or crime prevention.
0 We do not guarantee the compatibility of all the DLNA compatible TVs.
0 This function is available when a connection to the access point is made
with wires as well.
0 To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.EASY STORAGE
You can save the...

0Tap “STOP” to disconnect.
5 Connection is established; backup starts.
(Indication on this camera)
.
0Tap “STOP” to disconnect.
6 Backup starts.
.
0Everio Watcher appears on the task bar located on the lower right of
the computer screen.
0 To see the status of backing up and remaining time, move the arrow
to it.
7 Backup is completed.
(Operation on this camera)
.
0Tap “OK”, or wait for about 10 seconds to turn off the power
automatically.
Memo : 
0 After performing “EASY STORAGE”, it is recommended to...

.
4Tap “START” ( I).
(Operation on this camera)
.
0When iFrame is selected for “VIDEO REC FORMAT”, the following
display appears and recording mode is switched to the 60i mode in
AVCHD.
.
5Check the SSID and the PASS being displayed on the screen of the
camera.
.
6Select the SSID in step 5 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone (or computer))
.
0For details on connecting your smartphone (or computer) to a Wi-Fi...

5Tap “WPS”.
(Operation on this camera)
.
6Activate WPS on the smartphone (or computer) within 2 minutes.
(Operation on the smartphone (or computer))
0 To activate WPS, refer to the instruction manual of the device in use.
7 A connection is established and  Q
 appears on the camera’s screen.
.
Operation Method
1 Activate the GPS function of the smartphone.
(Operation on the smartphone)
.
0For details on using the smartphone, refer to the instruction manual
of the device in use.
2 Start “Everio sync. 2” on...

.
0Press the “START/STOP” button to start a normal recording.
Memo : 
0Manual recording cannot be performed.
0 It is not possible to switch to the playback mode.Using the Pan Cradle (Sold Separately)
Panning operation (moving the camera to the left/right, horizontal direction) can be controlled via smartphone by setting the camera on the pan cradle.To use a pan cradle, change the setting of “AV TERMINAL” in advance.
Change the setting from the menu screen of the camera.
o Changing the setting of the AV...

oSetting the camera to the pan cradle.
0 For how to connect the pan cradle and the camera, refer to the instruction
manual of the pan cradle for further details.1 Set the camera to the pan cradle.
.
0For how to connect the pan cradle and the camera, refer to the
instruction manual of the pan cradle for further details.
2 Set the power of the pan cradle to “ON”.
.
3Wait until the pan cradle stops the rotation.
.
0When the power is turned ON, pan cradle moves to the left/right to
adjust the position.
o...

.
Memo : 
0Speed of the panning operation can be set in two steps.
“Changing the Panning Speed” ( A p. 160)Changing the Settings
To use the Wi-Fi function, it may be necessary to perform some settings on
the camera and smartphone (or computer).
0 Registering the access points to connect (wireless LAN router)
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 151)
0 Obtaining a dynamic DNS account
“Obtaining a Dynamic DNS (DDNS) Account” ( A p. 144)
0 Setting the account on...

Menu SettingsSettingDetailsDIRECT MONITORINGConfigures various settings related to DIRECT MONITORING.
0 PASSWORD
Sets the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
( A  p. 142)
0 ENFORCED GROUP OWNER (Default: “ON”)
Set whether or not to get the owner group permissions.
・ OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
devices that do not support Wi-Fi Direct will be disabled.)
・...