JVC GZ-EX555 User Manual

.
0Tap “Monitor” to return to the monitor screen.
0 Tap  Q
 to move to the setting screen.
6 Tap “TRANSFER”.
.
0Tap “CANCEL” to cancel the operation.
7 “TRANSFER” starts.
.
0Tap “CANCEL” to cancel the operation.
8 After transferring is complete, tap “OK”.
.
0To play back and check the still image, tap “CHECK”. (Android only)
0 To upload the still image, tap “SHARE”. (Android only)
Tap the desired service, then proceed to the uploading process.
To make use of a service, it is necessary to perform...

Smartphone Application Settings
You can change the settings of the smartphone applications.
o Common for Android and iOS
1
Tap  Q.
.
2 Tap the desired setting.
.
ItemDetailsMONITORINGTurns on/off the monitoring function of the
screen. (Enter a check mark to set to “ON”)PAN OPERATION
SPEEDSelect the panning speed of the pan cradle
(optional) from high speed/low speed.LOC INFO TRANS INTSelect the time interval for obtaining the GPS
location information while the direct monitoring
is in use. (Off - 15...

Game Score Settings
Enter the recording methods of the game score, as well as the teaminformation.
o Common for Android and iOS
1
Tap  Q.
.
2 Tap “GAME SCORE SETTING”.
.
3Tap the desired setting.
.ItemDetailsTEAM LISTSet the team name and the color.
To display “HOME” and “VISITOR”, tap  A“TEAM
LIST”.
B “TEAM NAME” and “TEAM COLOR” can be set by
tapping each button.
C  Select “TEAM NAME” to display the screen for
entering the team name. Tap the column to enter the
team name, and press “OK”.
D Select “TEAM...

Using the Wi-Fi Function from a Web Browser
You can connect to the camera and make use of the Wi-Fi function from the web browser of a computer. 0 Indications on the screen
“Indications on the Screen” ( A p. 174)
Indications on the Screen
o Recording Screen
.
Memo : 
0The full screen button is not displayed when the stream format is MotionJPEG.Caution : 
0Features of the stream format are as follows:
Full HD/SD (MPEG-2 TS format)
- Sound of the camera can be checked from the browser.
- Recording...

oVideo Index Screen (Thumbnail Display) (AVCHD)
.
oVideo Index Screen (Thumbnail Display) (iFrame)
.
0To download a video, click on the thumbnail.
o Still Image Index Screen (Thumbnail Display)
.
0To download a still image, click on the thumbnail.
Using Wi-Fi (GZ-EX555/GZ-EX515)175 

oDETECT/MAIL SETTING Screen
Notification mail settings such as detection method and recipient’s e-mail address can be changed even when the camera is out of reach.
.Using Wi-Fi (GZ-EX555/GZ-EX515)176 

Troubleshooting
Direct MonitoringTroubleActionUnable to connect to camera.
(URL required)0 Check whether the Wi-Fi connection is established successfully.
0 Check whether Wi-Fi is connected to “DIRECT-**EVERIO”.
0 Check whether the smartphone (or computer) is connected to the camera.
0 Try again after powering off and on the camera and the terminal (smartphone or computer).Unable to browse internet on the computer
when it is connected to the camera.0 The camera operates as an access point during direct...

INDOOR MONITORING (connection at home)TroubleActionUnable to connect to the camera.
(URL required)0 Check whether the Wi-Fi connection is established successfully.
0 Check to ensure that the camera and the terminal (smartphone or computer) are connected to the same
access point.
0 Try again after powering off and on the camera and the terminal (smartphone or computer).Unsure of URL to access from a web
browser.0 After INDOOR MONITORING is started, tap “CAMERA NETWORK INFO.” shown on the camera’s screen....

OUTDOOR MONITORING (connection from the Internet)TroubleActionUnsure of URL to access from a web
browser.0 After OUTDOOR MONITORING is started, tap “CAMERA NETWORK INFO.” shown on the camera’s
screen.
Enter the address as shown in “URL(WAN):” into the web browser to access it.The URL (WAN) does not appear in the
network information.0 The URL (WAN) will not appear if dynamic DNS is not set on the camera.
To set dynamic DNS, perform the following steps.
1. Obtain an account with JVC dynamic DNS service...

0When the “HTTP Port” of the camera (set to “80” by default) is used by another device, a connection cannot
be established. Change the “HTTP Port” of the camera.
“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)” ( A  p. 143)
E-mail (Notification Mail, Video Mail)
TroubleActionUnable to send e-mails.0
Check that the settings of the e-mail server are correct.
0 Check that the settings of the sender’s e-mail address are correct.
0 Check that the username and password are...