JVC GZ-EX555 User Manual

Setting Self Recording on this Camera (DETECT/MAILSETTING)
Sets whether to record videos on this camera during detection.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( P).
(Operation on this camera)
.
4Tap “SELF RECORDING”.
(Operation on this camera)
.
5Tap “ON” or “OFF” to make a selection.
.
0Select “ON” to record videos on this camera.
0 Select “OFF” not to record videos on this camera.
Registering the...

.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch and Register1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
)...

7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0...

7Tap “MANUAL”.
(Operation on this camera)
.
8Enter the name (SSID) of the access point (wireless LAN router) and tap
“SET”.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E...

oWPS PIN Registration1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “WPS PIN”.
(Operation on this camera)
.
0The PIN code appears.
8 Enter the PIN code displayed on the camera to the access point
(wireless...

Editing LAN Settings of Access Points (Wireless LAN Router)
Change accordingly such as when you want to fix the IP address for the
camera.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “LAN SETTINGS”.
(Operation on this camera)
.
0 Tap “USE” to...

Enabling the MAC Address Filter (TV MONITORING)
By enabling “MAC ADDRESS FILTER”, Everio can be searched from the
device (TV monitor); the MAC address of the device needs to be registered
to Everio in advance.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “TV MONITORING”.
.
4Tap “MAC ADDRESS FILTER”.
.
5Select “ON” or “OFF”.
Memo : 
0If “MAC ADDRESS FILTER” is enabled while no MAC address is
registered, Everio can not be...

Checking the MAC Address of this Camera
Displays the MAC address of the camera.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “MAC ADDRESS”.
(Operation on this camera)
.
0The MAC address of the camera appears.
(The above shows the address during direct connection, while the
below shows the MAC...

.
0Enter the 4-digit numbers.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap  E or  F to move one space to the left or right.
0 After setting, tap “SET”.
Initializing the Wi-Fi Settings
Returns the Wi-Fi settings to their default values.
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this...

.
0To cancel, tap “NO”.
0 When “YES” is tapped, the network settings return to their default
values.
Changing the Panning Speed
Change the operation speed of the pan cradle (sold separately) via
smartphone.
Select either of the 2: “HIGH SPEED” or “LOW SPEED”.
0 For details on how to use a pan cradle, refer to the following.
“Using the Pan Cradle (Sold Separately)” ( A p. 137)
o Change the setting via smartphone
1
Tap  Q.
Confirm that the camera and a smartphone are connected via Wi-Fi,
and the monitor...