Iwatsu Adix Vs Owners Manual

Digital Telephone User’s Guide - 99  Tone/Voice Calling 
The calling mode for intercom calls may be switched between voice and tone signaling.  
ADIX-VS may be programmed to allow either the calling party or the called party to 
have control of the signaling mode. 
 
Operation 
Calling party control: 
F Dial intercom extension number 
F Dial # 
 
Called party control: 
F Press the Feature button FEAT then dial 65 
Or 
F Press the Tone button V/T if assigned as a Multipurpose button and 
the lamp will be...

Digital Telephone User’s Guide - 100  Universal Night Answer 
Allows you to answer calls that have been switched to ring at the Night Mode 
location. 
 
F Lift the receiver 
F Wait for the dial tone 
F Press the Feature button FEAT then dial 36 
Or 
F Press the Universal Night Answer button UNA if assigned as a 
Multipurpose button 
Voice Mail Message 
ADIX-VS comes equipped with Omega-Voice VMI Voice Mail. For information on 
Omega-Voice VMI and message management functions, please refer to Section 6 of...

Digital Telephone User’s Guide - 101  To begin a conversation with the caller during monitor (other programming required): 
F While listening to the caller record a message 
F Press the Voice Mail Monitor button VMMNT 
F The Voice Mail Monitor button VMMNT green LED will turn off 
F Begin speaking with the caller. 
F The voice mail message will be deleted. 
 
To Activate /Deactivate or change the voice mail monitor mode: 
F While your station is idle press SPKR 
F Press the Voice Mail Monitor button...

Digital Telephone User’s Guide - 102  Whisper Page During Consultation Hold  
You can now use Whisper Page during consultation hold. When a user tries to transfer 
a call to a busy station and thus temporarily places the call on consultation hold, the 
station can send a whisper page to the busy station. This feature allows the 
transferring party to announce a call to a busy station and then camp-on the call in 
one step. 
Operation: 
F Operation for shifting to whisper page state 
After busy signal...

Digital Telephone User’s Guide - 103  F To select and send a manual signaling text message to the originating 
Whisper Page station 
1. After you receive a whisper page 
§ Press the Text Message button [TEXT MSG] + text message 
number (00 – 99) 
or  
§ Press the Preprogrammed Text Message button [TEXT MSGn] 
2. Dial an extension number or press a DSS key or Call Coverage 
key 
F To delete a text message from your display 
1. Press the Text Message button [TEXT MSG] when a text message 
displays  
2....

Digital Telephone User’s Guide - 104  

  Section 4 -  
Attendant Position 
Features 
  

  ADIX-VS  

Attendant Position Features - 107  
Attendant Position - Basic Features 
Receiving an Incoming Call 
There are two ways you may answer incoming calls; either with the receiver in the 
cradle or with the receiver not in the cradle. 
 
Operation 
To answer calls with the receiver in the cradle:  
When your phone rings and the outside line button(s) flash red: 
F Lift the receiver and you will be connected to the outside caller 
F The outside line button will flash green. 
Transferring a Call to Another...

Attendant Position Features - 108  Receiving an Intercom Call 
Internal or intercom calls will flash the lamp on the Operator button OPER at the 
Attendant Position. 
 
Operation 
To answer intercom calls with the receiver in the cradle: 
F Lift the receiver 
Putting a Call on Hold 
 
Operation 
To put a call on Hold: 
F Press the Hold button HOLD/DND and the lamp will intermittently 
flash green on the outside line button 
Picking Up a Call on Hold 
 
Operation  
To retrieve a call on Hold: 
F Press the...