Insignia NS-46D400NA14, NS-50D400NA14 Led Tv User Guide

							57
Insignia 46/50" LED TV
www.insigniaproducts.com
Adjusting time settings
When you set up your TV for the first time, the clock 
was set up. If you move your TV to a different time 
zone, you need to reset the clock to the correct 
time.
Setting the clock
To  s e t  t h e  c l o c k :
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight Time, then press 
ENTER. The SET TINGS · TIME menu opens.
4Press 
S or T to highlight Date/Time, then press 
ENTER. The SETTINGS · TIME · DATE/TIME menu 
opens.5Press 
S or T to highlight Mode, then press 
ENTER. A menu opens.
6Press 
S or T to highlight Manual (to set the 
options manually) or Auto (the options are 
automatically set by the TV signal source). 
7Press 
S or T to highlight Time Zone, then 
pressENTER. A menu opens.
8Press 
S or T to select your time zone, then press 
ENTER. You can select Eastern, Central, 
Mountain, Pacific, Alaska, Hawaii, Atlantic or 
Newfoundland.
9If your viewing area observes daylight savings 
time, press 
S or T to highlight Daylight 
Savings, then press ENTER.
10Press 
S or T to select On or Off, then press 
ENTER to close the menu.
11If you selected Manual for Mode:
• Press 
S or T to highlight Year, Month, or Day, 
then press X to access the setting. Press S or T to adjust the setting, then press ENTER.
• Press 
S or T to highlight Time, then press X to 
access the setting. Press 
W or X to highlight 
the hour, minute, or AM/PM field, then press S 
or T to adjust the setting. When you are 
finished, press ENTER.
12Press MENU to return to the previous menu, or 
press EXIT to close the menu. 
						

							58
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Setting the sleep timer
You can specify the amount of time before your TV 
automatically turns off.
To set the sleep timer:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight Time, then press 
ENTER. The SET TINGS · TIME menu opens.
4Press 
S or T to highlight Sleep Timer, then 
press ENTER. A menu opens.
5Press 
S or T to selec t the amount of time before 
your TV turns off automatically. You can select 
Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240 
minutes.
To turn off the sleep timer, select Off.
6Press MENU to return to the previous menu, or 
press EXIT to close the menu.
Adjusting menu settings
Selecting the menu language
Your TV can display the on-screen menu in English, 
French, or Spanish. When you set your TV up for the 
first time, the language was selected. You can 
change the menu language to a different language.
To select the menu language:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.p
3Press S or T to highlight Menu Language, then 
press ENTER. A menu opens.
4Press 
S or T to highlight a language, then press 
ENTER. You can select English, Français, or 
Español.
5Press MENU to return to the previous menu, or 
press EXIT to close the menu.
Note
You can also press SLEEP to set the sleep 
timer. 
						

							59
Insignia 46/50" LED TV
www.insigniaproducts.com
Labeling an input source
You can add a label to an input source to make it 
easier to identify.
To label an input source:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight Input Labels, then 
press ENTER. The SETTINGS · INPUT LABELS 
screen opens with the input source field 
highlighted.
4Press 
S or T to select the input source you want 
to label, then press X to move to the label field.
5Press 
S or T to select a character, then press 
Wor X to move to the previous or next character 
position. Repeat this step to enter additional 
characters. 
6When you have completed the label, press 
ENTER.
7Press MENU to return to save your label and 
return to the previous menu. The next time you 
press INPUT, your label will appear in the INPUT 
SOURCE list.
8Press EXIT to close the menu.
Turning Input Sensor on or off
When the Input Sensor feature is turned on, your TV 
automatically detects which video jacks have 
devices connected to them. Your TV uses this 
information to determine what options you can 
select on the INPUT SOURCE list when you press 
INPUT.
To turn Input Sensor on or off:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight Auto Input Sensing, 
then press ENTER. A menu opens.
4Press 
S or T to select On (turns on the input 
sensor) or Off (turns off the input sensor).
5Press MENU to return to the previous menu, or 
press EXIT to close the menu. 
						

							60
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Using INlink
INlink lets you control HDMI CEC-compatible 
devices connected to the HDMI jacks on your TV 
using the remote control that came with your T V. To 
use INlink, you must set the INlink Control setting 
on the SETTINGS · INlink menu to On.
Turning INlink on or off
To turn INlink on or off:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight INlink, then press 
ENTER. The SETTINGS · INlink menu opens.
4Press 
S or T to highlight INlink Control, then 
press ENTER. 
5Press 
S or T to highlight On or Off, then press 
ENTER.
6Press MENU to return to the previous menu, or 
press EXIT to close the menu.
Turning Device Auto Power Off on or off
When INlink is set to On, Device Auto Power Off 
automatically turns off HDMI CEC devices when you 
turn off your TV.
To turn Device Auto Power Off on or off:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight INlink, then press 
ENTER. The SETTINGS · INlink menu opens.
4Press 
S or T to highlight Device Auto Power 
Off, then press ENTER. 
5Press 
S or T to highlight On (turns off the 
connected devices when you turn off your TV ) 
or Off (does not turn off the connected devices 
when you turn off your TV ), then press ENTER.
6Press MENU to return to the previous menu, or 
press EXIT to close the menu.
Note
• HDMI cables must be used to connect 
HDMI CEC-compatible devices to your 
TV.
• The connected device’s HDMI CEC 
feature must be turned on.
• If you connect an HDMI device that is 
not HDMI CEC-compatible, all the 
INlink Control features do not work.
• Depending on the connected HDMI 
device, the INlink Control feature 
may not work. 
						

							61
Insignia 46/50" LED TV
www.insigniaproducts.com
Turning TV Auto Power On on or off
TV Auto Power On automatically turns on your TV 
when an HDMI CEC device is turned on, if the 
device has this feature.
To turn TV Auto Power On on or off:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight INlink, then press 
ENTER. The SETTINGS · INlink menu opens.
4Press 
S or T to highlight TV Auto Power On, 
then press ENTER. 
5Press 
S or T to highlight On (turns on your T V 
when you turn on the connected device) or Off 
(does not turn on your TV when you turn on the 
connected device), then press ENTER.
6Press MENU to return to the previous menu, or 
press EXIT to close the menu.
Turning Audio Receiver on or off
When INlink is turned on and you have connected 
an audio receiver to your TV, turning on Audio 
Receiver lets you use your TV’s remote control to 
control the volume on the audio receiver.
To turn Audio Receiver on or off:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press 
T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight INlink, then press 
ENTER. The SETTINGS · INlink menu opens.
4Press 
S or T to highlight Audio Receiver, then 
press ENTER. 
5Press 
S or T to highlight On (your TV’s remote 
control controls the connected audio receiver’s 
volume) or Off (your TV’s remote control does 
not control the connected audio receiver’s 
volume), then press ENTER.
6Press MENU to return to the previous menu, or 
press EXIT to close the menu. 
						

							62
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Displaying a list of INlink-compatible 
(HDMI CEC) devices
You can display a list of HDMI CEC devices that are 
connected to your TV.
To display a list of INlink-compatible (HDMI CEC) 
devices:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight INlink, then press 
ENTER. The SETTINGS · INlink menu opens.
4Press 
S or T to highlight INlink Device Lists, 
then press ENTER. A list of the HDMI 
CEC-compatible devices you have connected 
appears.
5Press MENU to return to the previous menu, or 
press EXIT to close the menu.
Waking INlink-compatible (HDMI CEC) 
devices
When a connected INlink-compatible device is 
in turned off (standby mode), Connect wakes 
(turns on) the device.
To wake INlink-compatible (HDMI CEC) devices:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight INlink, then press 
ENTER. The SETTINGS · INlink menu opens.
4Press 
S or T to highlight Connect, then press 
ENTER. A list of HDMI CEC-compatible devices 
you have connected opens.
5Press 
S or T to highlight the device you want to 
connect to, then press ENTER.
6Press MENU to return to the previous menu, or 
press EXIT to close the menu. 
						

							63
Insignia 46/50" LED TV
www.insigniaproducts.com
Opening an INlink-compatible device’s root 
menu
You can open an INlink-compatible device’s root 
menu, then use your TV’s remote control to control 
the device, if the device has this feature.
To open an INlink-compatible device’s root 
menu:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETTINGS, then press 
T or ENTER. The SETTINGS menu opens.
3Press 
S or T to highlight INlink, then press 
ENTER. The SETTINGS · INlink menu opens.
4Press 
S or T to highlight Root Menu, then press 
ENTER. The device’s root menu closes, and you 
can use your TV’s remote control to control the 
device.
Using an MHL-enabled 
device or Roku Streaming 
Stick
You can connect your MHL-enabled device, such as 
a cell phone or Roku Streaming Stick™, and view 
your device’s screen on your TV.
Using an MHL-enabled device
To use an MHL-enabled device:
1Connect an MHL-enabled device to your TV. For 
connection instructions, see “Connecting an 
MHL-enabled device” on page23. A message 
tells you the device is connected.
2Press ENTER to access your MHL-enabled 
device. Your device’s menu opens.
3Use 
S T W X and ENTER to navigate on your 
device. 
Note
Your device’s menu wi ll va r y dependin g on 
the device and the apps you have loaded 
on the device.
Note
The buttons you use to navigate on your 
device may vary depending on the device. 
						

							64
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
To switch to an MHL-device that is already 
connected:
1Press INPUT, then press 
S or T to select 
HDMI 2-MHL/ACC.
OR
Press MENU, then press 
W or X to highlight 
MHL.
2Press ENTER to access your MHL-enabled 
device. Your device’s menu opens. 3Use 
S T W X and ENTER to navigate on your 
device.
Using a Roku Streaming Stick
To use a Roku Streaming Stick:
1Connect a Roku Streaming Stick to your TV. For 
connection instructions, see “Connecting an 
MHL-enabled device” on page23. A message 
tells you the stick is connected.
2Press ENTER to access your Roku Streaming 
Stick. Your stick’s menu opens.
3Use 
S T W X and ENTER to navigate on your 
Roku Streaming Stick.
Note
Your device’s menu wi ll va r y dependin g on 
the device and the apps you have loaded 
on the device.
Note
The buttons you use to navigate on your 
device may vary depending on the device.
Note
Your Roku Streaming Stick’s menu will 
vary depending on the content you have 
loaded on the device. 
						

							65
Insignia 46/50" LED TV
www.insigniaproducts.com
To switch to a Roku Streaming Stick that is 
already connected:
1Press INPUT, then press 
S or T to select 
HDMI 2-(Roku).
OR
Press MENU, then press 
W or X to highlight 
STREAMING.
2Press ENTER to access your Roku Streaming 
Stick. Your stick’s menu opens. 
3Use 
S T W X and ENTER to navigate on your 
Roku Streaming Stick.
Using a USB flash drive
You can connect a USB flash drive to your TV to 
view compatible JPEG pictures.
Switching to USB mode
To switch to USB mode:
1Make sure that you have connected the USB 
flash drive to the USB port on your TV.
2If your TV is turned on when you connect the 
USB flash drive, press 
S or T to highlight Ye s in 
the message that appears, then press ENTER. 
The PHOTOS menu opens.
OR 
If you connected the USB flash drive, then 
changed to a different video input source, press 
INPUT to open the INPUT SOURCE list, press 
S or T to highlight USB (Photos), then press ENTER. 
The PHOTOS menu opens.
Note
Your Roku Streaming Stick’s menu will 
vary depending on the content you have 
loaded on the device.
Notes
• Never remove the USB flash drive or 
turn off your TV while viewing JPEG 
pictures.
• The JPEG picture viewer only supports 
JPEG format images (with “.jpg” file 
extensions) and not all JPEG files are 
compatible with your TV.
Note
To exit USB mode, press INPUT to open 
the INPUT SOURCE list, then select another 
input source. 
						

							66
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Browsing photos
To browse photos:
1Switch to USB mode. See “Switching to USB 
mode” on page65. The PHOTOS menu opens.
2Press 
S or T to highlight Browse Photos, then 
press ENTER. The screen displays folder names 
and photo files stored on the USB flash drive in a 
thumbnail index with the first photo or folder 
highlighted. A control bar appears at the 
bottom of the screen.
3To navigate the thumbnail index screen, press:
•
S T W or X to browse through the files and 
folders.
•ENTER to view a highlighted photo full-screen 
or open a highlighted folder.
•MENU to open the PHOTOS menu.
•FAV O R I T E to add or remove a photo from the 
favorite photo list. A heart appears on a photo 
that has been added to the favorite photo list.
• Press EXIT to close the control bar.When a photo is displayed full-screen, a control 
bar appears at the bottom of the photo. The file 
name, picture resolution, size, and date are 
displayed on the bottom of the control bar. If 
you do not press a button within 10 seconds, 
the control bar closes. Press INFO to open the 
control bar again. 
4To navigate on the photo screen, press:
•
W to go to the previous photo.
•
X to go to the next photo.
•ENTER to rotate the photo clockwise.
•ASPECT one or more times to enlarge the 
image by ×2, or ×4 or to select Fill (to fill the 
screen). You can press 
S T W or X to pan the 
photo.
•EXIT to return to the thumbnail index.
•MENU to return to the PHOTOS menu.
Note
Photos are shown in the order they appear 
on the USB flash drive. They may not be 
listed in file name order.