Insignia NS-46D400NA14, NS-50D400NA14 Led Tv User Guide

							7
Insignia 46/50" LED TV
www.insigniaproducts.com
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and 
scratches.
2If the stand is attached, remove the five screws that secure the stand column to the TV, then remove the stand 
column.
3Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions 
that came with the wall-mount bracket for information about how to correctly hang your TV.
Warning
This TV is intended to be supported by a UL Listed wall mount bracket with 
suitable weight/load. (See “Miscellaneous” on page 77.)
Notes
• The length of the wall-mount screws vary depending on the wall-mount 
bracket you purchased. See the instructions that came with the 
wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take type M6 screws.
7.87 in. (200 mm)
7.87 in. (200 mm)
Wall-mount brackets
Wall-mount brackets 7.87 in. (200 mm)
11.81 in. (300 mm)
NS-46D400NA14 NS-50D400NA14 
						

							8
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
TV components
Package contents
• 46" or 50" LED TV
• Remote control and batteries (2 AAA)
•Stand column and screws (5)
• TV stand and screws (4)
• Quick Setup Guide
• Important Information
Front
Note
This graphic shows the location of the 
power indicator (1) and remote control 
sensor (2) on the NS-46D400NA14.
The power indicator and remote control 
sensor on the NS-50D400NA14 are to the 
right of the Insignia logo on the front of 
the T V.
#ItemDescription
Power indicatorTurns off when your T V is on.
Lights red when your TV is off 
(standby mode).
Remote control 
sensorReceives signals from the remote 
control. Do not block.
MENUPress to open the on-screen 
menu. For more information, see 
“Navigating the menus” on 
page40.
INPUT
Press one or more times to select 
the video input source you want, 
then wait a few seconds. Your TV 
switches to the source you 
selected. For more information, 
see “Selecting the video input 
source” on page39.
In menu mode, press to confirm 
selections.
VOL+/VOL–Press to increase or decrease the 
volume.
CHS/CHT
Press to go to the next or previous 
channel in the channel list. For 
more information, see “Selecting 
a channel” on page41.
POWERPress to turn your TV on or off 
(standby mode). 
Warning: When your TV is off, 
power still flows through it. To 
completely disconnect power, 
unplug the power cord.
1
2
3
4
5
6
7 
						

							9
Insignia 46/50" LED TV
www.insigniaproducts.com
Side#ItemDescription
HDMI 3/DVIConnect an HDMI device to this 
jack. For more information, see 
“Using HDMI (best)” on pages 13, 
19, 24, or 28.
OR
Connect the video for a DVI device 
to this jack. For more information, 
see “Using DVI (same as HDMI but 
requires an audio connection)” on 
pages14,20 or29.
HDMI 2/MHL
Connect an HDMI device to this 
jack. For more information, see 
“Using HDMI (best)” on pages 13, 
19, 24, or 28.
OR
Connect an MHL-enabled device, 
such as a cell phone, to this jack to 
view pictures and videos stored on 
the device. For more information, 
see “Connecting an MHL-enabled 
device” on page23 and “Using an 
MHL-enabled device or Roku 
Streaming Stick” on page63.
HDMI 1/ARCConnect an HDMI device to this 
jack. For more information, see 
“Using HDMI (best)” on pages 13, 
19, 24, or 28.
OR
If you are connecting a home 
theater system using HDMI, 
connect it to this jack.
USB
Connect a USB flash drive to this 
jack to view compatible JPEG 
picture files. For more information, 
see “Connecting a USB flash drive” 
on page30 and “Using a USB flash 
drive” on page65.
AUDIO OUT/Connect headphones, an analog 
audio amplifier, a home theater 
system, or a sound bar to this jack. 
For more information, see “Using 
analog audio” on page33. 
1
2
3
4
5 
						

							10
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Back#ItemDescription
PC/DVI AUDIO INConnect the audio for a computer 
to this jack. For more information 
see “Using VGA (most common)” 
on page27.
OR
Connect the audio for a DVI 
device to this jack. For more 
information see, “Using DVI (same 
as HDMI but requires an audio 
connection)” on pages14, 20, 
or29.
VGA
Connect the video ( VGA) for a 
computer to this jack. For more 
information, see “Using VGA 
(most common)” on page27.
COMPONENT IN
Y/VIDEO, P
B, PR
OR
AV I N Y / V I D E OThe Y/VIDEO jack works as one of 
the three component video jacks 
or as a composite video jack.
Connect the video for a 
component video device to 
COMPONENT IN Y/VIDEO, P
B, 
and PR jacks. For more 
information, see “Using 
component video (better)” on 
page15, 21, or 25.
OR
Connect the video for a 
composite video device to the 
AV IN Y /V I D E O jack. For more 
information, see “Using 
composite video (good)” on 
page16, 22, or 26.
L/R AUDIO
Connect the audio for a 
component video device to these 
jacks. For more information, see 
“Using component video (better)” 
on page15, 21, or 25.
OR
Connect the audio for a 
composite video device to these 
jacks. For more information, see 
“Using composite video (good)” 
on page16, 22, or 26.
DIGITAL OUTPUT 
(Optical)Connect a digital audio amplifier 
or home theater system to this 
jack to listen to TV audio through 
the amplifier speakers. For more 
information, see “Using digital 
audio” on page32.
ANT/CABLE IN
Connect an antenna or cable TV 
to this jack. For more information, 
see “Connecting an antenna or 
cable T V (no box)” on page18.
1
2
3
4
5
6 
						

							11
Insignia 46/50" LED TV
www.insigniaproducts.com
Remote control
#ButtonDescription
 (power)Press to turn your TV on or off (standby mode). 
Warning: When your TV is off, power still flows 
through it. To disconnect power, unplug the power 
cord.
NumbersPress to enter channel numbers and the parental 
control password.
Press to enter a digital sub-channel number. For more 
information, see “Selecting a channel” on page 41.
ENTERPress to confirm selections or changes or to access a 
sub-menu.
MENU Press to open the on-screen menu.
EXITPress to close the on-screen menu.
ASPECTPress to change how the picture looks on the screen 
(aspect ratio). For more information, see “Aspect ratio 
options” on page42.
VOL+/–Press to increase or decrease the volume.
SLEEPPress to set the sleep timer. You can select Off, 5, 10, 
15, 30, 60, 90, 120, 180, or 240 minutes. For more 
information, see “Setting the sleep timer” on page58.
1
2
3
4
5
6
7
8
9
FAVORITEPress to open the Favorite channel list. For more 
information, see “Setting up a favorite channel list” on 
page48 and “Viewing a favorite channel” on page48.
INlink ControlsPress to control INlink-compatible (HDMI CEC) devices. 
For more information, see “Using INlink” on page60.
INPUT
Press to open the INPUT SOURCE list, press S or T on 
the remote control to select the video input source, 
then press ENTER. For more information, see 
“Selecting the video input source” on page39.
 (return) In TV mode, press to return to the previous channel.
S T W XPress to navigate in on-screen menus and to adjust 
settings.
(home)When an MHL-enabled device or Roku Streaming Stick 
is connected to the HDMI 2/MHL jack, press to open 
the device’s menu.
INFO*
Press to display TV status information, such as the 
channel number, channel name (if available), or signal 
source. For more information, see “Viewing channel 
information” on page41.
CCDPress to turn closed captioning on or off. You can select 
CC Off, CC On, or CC on when mute. For more 
information, see “Turning closed captioning on or off” 
on page54.
MUTEPress to mute the sound. Press again to restore the 
sound.
CH /CHPress to change TV channels. For more information, 
see “Selecting a channel” on page41.
MTS/SAP
Press to select the audio mode for an analog program. 
You can select:
•Mono—Select this option if there is noise or 
static on weak stereo broadcasts.
•Stereo—Select this option for programs 
broadcast in stereo.
•SAP—Select this option to listen to a 
secondary audio program, if available. 
OR
Press to select the audio language for a digital 
program, if alternate languages are available.
PICTUREPress to select the picture mode. You can select Vivid, 
Standard, Energy Savings, Movie, or Custom. For 
more information, see “Picture Mode” in “Adjusting 
the TV picture” on page 41.
AUDIO
Press to select the sound mode. You can select 
Standard, Theater, Music, News, or Custom. For 
more information, see “Sound Mode” in “Adjusting 
sound settings” on page44.
#ButtonDescription
10
11
12
13
14
15
16
17
18
19
20
21
22 
						

							12
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
What connection should I 
use?
Your TV has several connection types for 
connecting devices to your T V.
For the best video quality, you should connect a 
device to the best available connection.
Use the following tables to identify cables:
You can use the HDMI 3/DVI jack on your TV to 
connect a DVI device to your TV. You need to attach 
an HDMI-to-DVI adapter to the end of the HDMI 
cable that connects to the DVI device.
Video 
qualityConnection 
type and 
jack
Cable connector
Best (use this 
if your devices 
have HDMI)HDMI 
video/audio
Better than 
composite or 
coaxialComponent 
video (requires 
an audio 
connection)
Better than 
coaxialComposite video 
(requires an 
audio 
connection)
GoodCoaxial 
video/audio
Connection 
type and 
jackCable connectors
Optical digital 
audio
Analog audio 
input
Analog audio 
output
VGA (computer) 
video and audio
Cautions
• Check the jacks for position and type 
before making any connections.
• Loose connections can result in image or 
color problems. Make sure that all 
connections are tight and secure.
• The external audio/video equipment 
shown may be different from your 
equipment. If you have questions, refer to 
the documentation that came with your 
equipment.
• Always unplug the power cord when 
connecting external equipment. 
						

							13
Insignia 46/50" LED TV
www.insigniaproducts.com
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the 
best connection type available. For more information, see “What connection should I use?” on page12.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT 
jack on the cable or satellite box.
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press 
S or T to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any 
audio cables.
HDMI cable
Cable or 
satellite boxSide of TV
HDMI cable 
connector
HDMI jackOn your TV 
						

							14
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires an audio connection)
To connect a cable or satellite box using DVI:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the 
adapter to the DVI OUT jack on the cable or satellite box.
4Connect the other end of the cable to the HDMI 3/DVI jack on the side of your TV.
5Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the 
audio out jacks on the cable or satellite box.
6Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7Press INPUT to open the INPUT SOURCE list.
8Press 
S or T to select HDMI3, then press ENTER.
Note
You must use the HDMI 3/DVI jack to connect a cable or satellite box. If you 
use another HDMI jack, you will not hear sound from the TV speakers.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio 
output is analog.
Cable or 
satellite box
HDMI cable with 
HDMI-DVI 
adapter
3.5mm audio 
cableSide of TV
HDMI cable 
connector3.5mm audio 
cable 
connector
HDMI 3/DVI 
jackPC/DVI 
AUDIO IN 
jack On your TV 
						

							15
Insignia 46/50" LED TV
www.insigniaproducts.com
Using component video (better)
To connect a cable or satellite box using component video:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a component video cable (not provided) to the COMPONENT IN Y/VIDEO, P
B, and PR video jacks on 
the back of your TV and the component video out jacks on the cable or satellite box.
4Connect an audio cable (not provided) to the L/R AUDIO jacks on the back of your T V and to the audio out jacks 
on the cable or satellite TV box.
5Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6Press INPUT to open the INPUT SOURCE list.
7Press 
S or T to select Component/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The COMPONENT IN Y/VIDEO, P
B, and PR video jacks (used to connect 
a component device) share the L/R AUDIO jacks with the AV I N  
Y/VIDEO jack (used to connect a composite device).
• When you connect the audio using the L/R AUDIO jacks, the audio 
output is analog.
Audio cableCable or 
satellite box
Component video cable
Back of TV Component 
video cable 
connectorsAnalog 
audio cable 
connector
Analog 
audio jacks Component 
video jacksOn your TV 
						

							16
 NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using composite video:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an AV cable (not provided) to the AV I N Y / V I D E O jack and L/R AUDIO jacks on the back of your TV and 
to the composite video and audio out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press 
S or T to select Component/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green 
AV IN Y / V I D EO jack.
Notes
•The COMPONENT IN Y/VIDEO, P
B, and PR video jacks (used to connect 
a component device) share the L/R AUDIO jacks with the AV I N  
Y/VIDEO jack (used to connect a composite device).
• When you connect the audio using the L/R AUDIO jacks, the audio 
output is analog.
Cable or 
satellite box
AV  c a b l e  
(composite video cable)
Back of TV Composite 
video cable 
connector
Composite 
video jackAnalog audio 
cable 
connectors
Analog 
audio jacks On your TV