InFocus ScreenPla 5700 Projector User Manual

31
WARNINGS: 
 To avoid burns, allow the projector to cool for at least 60 minutes before 
you replace the lamp.
 Do not drop the lamp module. The glass may shatter and cause injury.
 Do not touch the glass lamp screen. Fingerprints can obscure projection 
sharpness.
 Be extremely careful when removing the lamp module. In the unlikely 
event that the lamp ruptures, small glass fragments may be generated. 
The lamp module is designed to contain most of these fragments, but 
use caution when removing...

32
AppendixSpecificationsAccessories
*country-dependent
Temperature Operating
50 to 95
° F (10 to 35
° C) at 0 - 7,500 feet
Non-operating
-4 to 158
° F (-20 to 70
° C) at 0 -20,000 feet
Altitude Operating 0 to 7,500 feet (2,286 meters) 
Non-operating 0 to 20,000 feet (6,096 meters)
Humidity Operating  10% to 95% relative humidity, non-condensing
Non-operating 10% to 90% relative humidity, non-condensing
Dimensions13.8 x 12.8 x 4.3” (351W x 325L x 110H mm)
We i g h t9.3 lbs. (4.24 kg) unpacked
Optics...

33
NOTE: Use only approved accessories.Red LED behavior and projector errorsIf the projector is not functioning properly and the red LED is blinking, con-
sult Ta b l e  2  to determine a possible cause. There are two second pauses 
between the blinking cycles. Visit  www.infocushome.com/support  for 
more details on the red LED error codes.
Projected image sizeNOTE : Visit our website at  www.infocushome.com/support  for an interac-
tive image size calculator.
Table 3: Red LEDs
Red LED Behavior...

34
Source compatibility
Table 5: 
Source Compability
Video Component and RGB HDTV (720p, 1035i, 1080i, 1080p, 
1080p-24Hz)
DVI/HDCP for digital video and encrypted digital video
Component EDTV (480p, 576p progressive scan), 
SECAM: M, Component, Composite and S-Video standard 
video (480i, 576i, 576i RGB SCART with adapter, 
NTSC, NTSC M 4.43, 
PAL: B, H, I, M, N)
Computer Digital and analog PC, Macintosh, 1280x1024 resolution 
Communi-
cationUSB and RS-232
Table 6: 
Projector Inputs and Outputs...

35
Projector dimensions for ceiling mount installations
11.3”
288.1mm2.6”
64.9mm2.3”
57.8mm2.1”
53.7mm
12.3”
312.7mm
total length with optional cable cover: 16.2” 411.5mm) dimensions of optional cable cover: 12.4 x 3.9 x 3.2” (315 x 100 x 82mm)
8.5”
216mm 8.7”
221.4mm
4.3”
109.5mm
0.14”
3.6mm 

36
RS-232 terminal specificationsCommunication configurationTo control the projector from an LCD control panel, connect an RS-232 cable 
to the serial control connector on the projector and set your computer ’s 
serial port settings to match this communication configuration:Command formatAll commands consist of 3 alpha characters followed by a request, all 
enclosed in parentheses. The request can be a read request (indicated by a 
“?”) or a write request (indicated by 1 to 4 ASCII digits).
A read...

37 Supported commands
Function Command Range Default
Aspect Ratio ARZ 0-4
0 = Native
1 = 16:9
2 = 4:3
3 = Letterbox
4 = Natural Wide1
Auto Chime Enable ACE 0-1 1
Auto Power APO 0-1 0
Auto Source ASC 0-1 1
Blank BLK 0-1 0
Blank Screen BSC 0-2
0 = black
1 = blue
2 = white0
Blue Color Offest BCO 1-63 32
Blue Gain BCG 1-63 32
Brightness BRT 8-252 128
Ceiling CEL 0-1 0
Chroma Detail CDE 8-248 128
Color CLR 8-252 128
Color Space CSM 0-7
0 = RGB
3 = REC601
2 = REC709
7 = Auto7
Color Temp TMP 0-2
0 = 9300
1 =...

38
Language LAN 0-11
0 = English
1 = French
2 = German
3 = Spanish
4 = Chinese Tradi-
tional
5 = Japanese
6 = Korean
7 = Portuguese
8 = Russian
9 = Norwegian
10 = Chinese Sim-
plified
11 = Italian0
NTSC 2:2 Pulldown Enable NPE 0-1 0
Noise Reduction Enable NRE 0-2
0 = Off
1 = Auto
3 = Manual8
Noise Reduction Level NRL 8-248 8
Overscan OVS 0-1 0
Phase MSS 0-31 n/a
Power PWR 0-1 0
Power Save PSV 0-1 0
Presets PST 0-2
0 = User 1
1 = User 2
2 = User 30
Rear Project REA 0-1 0
Red Color Offset RCO 1-63 32
Red...

39 Numerics
12v triggers 4, 34
16x9 4, 13, 20, 22, 23
4x3 23
4x3 aspect trigger 4AADC Calibration 29
adjusting image 9, 22
Advanced menu 25
altitude limits 32
Aspect Ratio 22
Auto Power 27
Autosource 27BBlank Screen 28
blinking green 11
blinking red 11
Blue Only 29Ccable box 6
cables, optional 32
CCS 25
Ceiling 27
Chime 28
Chroma Delay 25
Chroma Detail 25
cleaning the lens 29
CLI commands 37
Color Space 26
color suppression 25
Color Wheel Index 29
colors are incorrect 14
command line interface commands...

40
image offset 5
image reversed 14
image size matrix 33
image sizes 5
image torn 15
image upside down 14
InFocus website 2
inputs 34
IR repeater 4Kkeystone 9, 22Llamp replacement 30
lamp timer, resetting 31
lamp won’t turn on 15
Language 28
LED
blinking green 11
blinking red 15
solid green 11
LED behavior 11, 33
Lens cleaning 29
Letterbox 23
Luma Detail 25MMain menu 21
Maintenance 29
menus 21
changing the language 28
making translucent 28NNative 22
Natural Wide 23
no computer image 16
no startup screen...