InFocus ScreenPla 5700 Projector User Manual

21
Using the menusTo open the menus, press the menu button on the keypad or remote. (The 
menus automatically close after 60 seconds if no buttons are pressed.) The 
Main menu appears. Use the arrow buttons to move up and down to high-
light the desired submenu, then press the Select button. 
To change a menu setting, highlight it, press Select, then use the up and 
down arrow buttons to adjust the value, select an option using radio but-
tons, or turn the feature on or off using check boxes. Press...

22
Picture menuTo adjust the following five settings, highlight the setting, press Select, use 
the up and down arrows to adjust the values, then press select to confirm 
the changes. All menu defaults are listed in a table starting on page 37.
Key s t o n e: adjusts the image vertically and makes a squarer image. You can 
also adjust keystone from the keypad.
Contrast: controls the degree of difference between the lightest and darkest 
parts of the picture and changes the amount of black and white in...

23
16:9: the default is 16:9, which preserves the 16:9 aspect ratio and is 
designed to be used with content that is Enhanced for Widescreen TVs. 
4:3: resizes the image from its original version to fit a standard 4:3 
aspect ratio screen. If you have a 4:3 source on a 16:9 screen, the image 
is placed in a 16:9 space, so black bars appear at the sides of the image.
Letterbox: preserves the 16:9 aspect ratio. If you have a 16:9 source and 
screen, the image fills the screen. If your source is...

24
Presets: This allows you to customize settings and save the settings to be 
restored later. To restore the factory default settings, choose Factory Reset in 
the Settings>Service menu. 
To set a preset for the current source, adjust the image, select Save Settings 
in the Presets menu, then choose Save User 1, 2, or 3. You can recall these 
settings in the future by selecting the appropriate user presets. 
Gamma: Gamma tables contain preset intensity configurations optimized 
for the input source. You...

25 Advanced settings
The following 4 options are for computer or HDTV sources only. 
Phase: adjusts the phase of the video signal’s digital conversion.
Tr a c k i n g: adjusts the frequency of the video signal’s digital conversion. 
Horizontal/Vertical Position: adjusts the position of the source.
Tr u e L i f e: This option refers to Faroudja’s TrueLife processing of the image. 
All standard definition interlaced video signals (composite, S-video and 
component) are routed through this processor....

26
Color Space: This option applies to computer and HDTV sources (it won’t 
appear in the menu for video sources). It allows you to select a color space 
that has been specifically tuned for the video input. When Auto is selected, 
the projector automatically determines the standard. To choose a different 
setting, turn off Auto, then choose RGB for computer sources, choose 
REC709 for component 1080i or 720p sources, or choose REC601 for compo-
nent 480p or 576p sources.
Color Temperature: changes the...

27
Settings menuSources
: allows you to assign a particular input to a specific source key on 
the remote and enables or disables Autosource. When Autosource is not 
checked, the projector defaults to the last-used source. If no source is found, 
a blank screen displays. When Autosource is checked, the projector checks 
the last-used source first at power up. If no signal is present, the projector 
checks the sources in order until a source is found or until power down. 
You can use the Source Enable...

28
Tr a n s l u c e n t  O S D: makes the menus translucent. This prevents the image 
from being completely covered by the menus while you are making image 
adjustments.
Chime: turn this on to hear a sound when the Powe r button is pressed.
Sleep Timer: allows you to force the projector to automatically shutoff after 
4 hours.
Pow e r  S av e: when On, the lamp is automatically turned off after no signals 
are detected for 20 minutes. After 10 additional minutes with no signal, the 
projector powers...

29
Service: to use these features, highlight them and press Select.
Factory Reset: restores all settings (except Lamp Hours) to their default 
after displaying a confirmation dialog box.
Te s t  P a t t e r n: displays a test pattern when the Blank button on the remote is 
pressed. To select the patterns, use the up/down arrows on the remote or 
keypad.
Blue Only: turns off the Red and Green portions of the input, allowing you 
to properly adjust the color balance with a SMPTE color bar pattern.
Color...

30
Replacing the projection lampThe lamp hour timer in the About menu counts the number of hours the 
lamp has been in use. After 1980 hours, the message “Change lamp” briefly 
appears on the screen at each startup. To maintain optimal video perfor-
mance, we recommend changing the lamp after 2000 hours, depending on 
usage. You can order new lamp modules from your dealer. See “Accesso-
ries” on page 32 for information.1
Turn off the projector and unplug the power cable. 
2
Wait 60 minutes to allow the...