InFocus Projector Play Big In82 User Manual

20
Picture menuTo adjust the following settings, highlight the setting, press Select, use the up and 
down arrows to adjust the values, then press Select to confirm the changes.Ke y s t o n e: adjusts the image vertically and makes a squarer image. Tilt the projec
-
tor up or down to adjust for keystone before using the digital keystone correction 
in the menu.Image Shift: moves the image vertically. Use to shift the image, or to mask arti
-
facts or bars on the top or bottom of the image.Contrast:...

21
Presets: This allows you to customize settings and save the settings to be 
restored later. To restore the factory default settings, choose Factory Reset in the 
Settings>Service menu. To set a preset for the current source, adjust the image, select Save Settings in 
the Presets menu, then choose Save User 1, 2, or 3. You can recall these settings in 
the future by selecting the appropriate user presets. All settings in the Picture 
menu (except Keystone) are saved and recalled. ISF Day and ISF Night...

22
Advanced menuRemember that not all options in the menus are available for all sources/signals. Iris: adjusts the aperture of the iris from 0 to 100 (fully open) to regulate the 
amount of light emitting from the projector. Close the aperture to increase the 
contrast in dark images.Phase: adjusts the horizontal phase of a computer source.Tr a c k i n g: adjusts the vertical scan of a computer source.Horizontal/Vertical Position: adjusts the position of a computer source.Sync Threshold Adjust:...

23
Color Temperature: changes the intensity of the colors. Select a value. Native 
means an uncorrected/unchanged color temperature. Other values change the 
white point of the colors. 6500K (the default setting) is generally used for film con
-
tent and 9300K is used for TV video.Color Gamut: sets the total number of possible displayable colors (gamut). 
Choose Auto to have the projector select automatically based on the current sig
-
nal format. Choose Maximum to display all colors that the projector...

24
Settings menuSources: 
allows programming of source buttons, enables autosource, and enables 
the SCART RGB source. When Autosource is selected, the Source Enable fea
-
ture indicates which sources the projector attempts to lock onto. You can use the 
Source Enable feature to eliminate certain sources from this search, which will 
speed the search. By default, the check boxes for all sources are checked except 
SCART RGB. Uncheck a source box to eliminate it from the search. When Auto
-
source is not...

25
Display Messages: displays status messages (such as “Searching”) in the lower-
left corner of the screen.Tr a n s l u c e n t  O S D  (On Screen Display): makes the 
menus translucent. This prevents the image from being completely covered by the 
menus while you are making image adjustments. Sleep Timer: automatically turns 
off the projector after 4 hours. Pow e r  S av e: automatically turns the lamp off after 
no signals are detected for 20 minutes. After 10 additional minutes with no signal, 
the...

26
Service: To use these features, highlight them and press Select.
Factory Reset: restores all settings to their default.Reset Lamp hours: resets the lamp hours used counter in the Service Info 
menu to zero. Do this only after changing the lamp. Test Pattern: displays a test pattern. To display test patterns, first you must 
assign Blank Screen to the Custom key (
page
 25), then click the Test pattern 
check box in the Service menu to turn the option on, exit the menus, then 
press the Custom button...

27
MaintenanceReplacing the projection lampThe lamp hours timer in the Service Info menu counts the number of hours the 
lamp has been in use. Twenty hours before the lamp life expires, a message appears 
on the screen at startup indicating that you should change the lamp. The LED on 
top of the projector also blinks red twice to indicate that the lamp should be 
changed.NOTE: You can order new lamp housings from www.infocus.com (in select areas), 
your retailer or your dealer. Use only a replacement...

28
4
Loosen the two captive screws on the lamp door and lift the door off.
5
Loosen the two captive screws that attach the lamp housing to the projector.
6
Carefully remove the lamp housing. Dispose of the lamp in an environmentally 
proper manner. 
7
Install the new lamp housing and tighten the screws.
8
Replace the lamp door.
9
Replace the base or ceiling mount plate, if necessary.
10
Plug in the power cord and press the Pow e r button on the remote to turn the 
projector back on.
11
To reset the lamp...

29
AppendixRemote control discrete codesYou can use these codes to program another remote to learn the projector’s 
remote functions.To activate discrete mode, press and hold the Custom button on the remote for 
10 seconds. The back light blinks twice when discrete mode is entered. The 
remote buttons are now remapped to new functions as listed below. To return to 
normal remote mode, press and hold the Custom button on the remote for 10 
seconds. The remote also returns to normal mode automatically if...