InFocus Projector Play Big In82 User Manual

IN82 
www.infocus.com/support
IN82

010-0629-01 *010-0629-01*
IN82
   
User’s Guide
User’s Guide
Mode d’emploi
Benutzeranleitung
Manual de Uso
Guidaalluso
Gebruikershandleiding
Guia do usuário
Användarhandbok
用户指南

C
M
Y
CM
MY
CY
CMY
K
K1 UG cover.pdf   8/2/2007   10:37:55 AM 

1
Declaration of ConformityManufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070 
USA
 
European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands
 
We declare under our sole responsibility that this projector conform to the following direc
-
tives and norms:
EMC Directive 89/336/EEC, Amended by 93/68/EEC
 
EMC: EN 55022
 
           EN 55024
 
 EN 61000-3-2
 
 EN 61000-3-3
 
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC
 
Safety: IEC 60950-1: 1
st...

2
Table of Contents 
Introduction 3
Positioning the projector  5
Choosing the aspect ratio  6
Connecting a video device  7
Video connectors  7
Digital connections  7
HDMI 1.3 connection  8
DVI connection  8
Component (RCA) connection  8
S-video connection  8
Composite (RCA) video connection  8
Computer connections  8
RS-232 connections  8
Displaying an image  9
Adjusting the image  9
Shutting down the projector  11
Troubleshooting your setup  11
Using the remote control  17
Optimizing video images  18...

3
IntroductionYour new InFocus
 projector is specifically designed for home theater applications. 
It sets a high standard using the latest DLP™ technology and new DNX™ video 
processing from Pixelworks™. The projector has 1920x1080 resolution (1080p). 
Whether you are watching movies or High Definition broadcasts or playing the lat
-
est video game, you will enjoy amazing image quality. Product specificationsTo read the latest specifications, be sure to visit our website at www.infocus.com 
as...

4
Connector PanelRemove the cable cover, if attached, to access the connector panel. Replace the 
cover after the projector is installed, if desired.The projector provides the following connection options:  M1-DA/DVI (Digital Visual Interface)  HDMI™ (High Definition Multimedia Interface) Component (RCA)S-video Composite video (RCA)See 
“Video connectors” on page
 7 for details.
 
The projector also provides the following connectors: RS-232 for serial control  Two 12 volt DC outputs (see below)...

5
Positioning the projectorTo determine where to position the projector, consider the size and shape of your 
screen, the location of your power outlets, and the distance between the projector 
and the rest of your equipment. Here are some guidelines: Position the projector on a flat surface at a right angle to the screen. The pro
-
jector must be at least 4.9 feet (1.5m) from the projection screen.
 For safety reasons, position the projector within 10 feet (3m) of your power 
source (running extension...

6
Choosing the aspect ratioAspect ratio is the ratio of the image width to image height. HDTV and most 
DVDs are 16:9, which is the default for this projector. When in 4:3 mode the pro
-
jector places black bars on both sides of the image. Native mode centers the image 
and turns off the internal scaler so that any resolution larger than the native pro
-
jector resolution is cropped on the edges. Letterbox expands the image to fill the 
screen.What you plan to project will also help you choose between...

7
Connecting a video deviceYou can connect video devices such as HDTV receivers, HD-DVD players, VCRs, 
camcorders, digital cameras, video game consoles, and TV tuners to the projector. 
Connect the audio from your video device to your stereo system to get sound.You can connect the projector to most video devices that can output video. You 
cannot directly connect the coaxial cable that enters your house from a cable or 
satellite company, the signal must pass through a tuner first. Examples of tuners...

8
HDMI 1.3 connectionHDMI is a standard, uncompressed, all-digital audio/video interface. HDMI pro
-
vides an interface between sources, such as set-top boxes, DVD players, and 
receivers and your projector. Plug an HDMI cable into the video-out connector on 
the video device and into the HDMI connector on the projector.To take advantage of HDMI 1.3 Deep Color (30 bit) you must have a 1.3-compati
-
ble source.Note that the projector has no audio capabilities, so audio signals transferred 
through HDMI...

9
Displaying an imageConnect the power cord to the Pow e r connector on the back of the projector 
and to your electrical outlet.NOTE: Always use the power cord that shipped with the projector. Press the Pow e r  button on the remote.The Power light on the Status Indicator Panel blinks green and the fans start to 
run. When the lamp comes on, the start up screen displays and the Power light is 
solid green. It can take a minute for the image to achieve full brightness. 
? No start up screen? Get help on...