InFocus Projector Lp620 User Manual

27
FIGURE 25
Adju sti ng the an gle of the projected im age
To lower the projector (raise the image):
1Press the elevator’s quick release button.
2Push the projector down.
3If necessary, rotate the  elevator  feet (Figure 25)  to  readjust  the 
angle of the projected image. 

28
Using the Projector
Changing between Color and  Monochrome  Modes
The color dial on the top of  the  projector (Figure 26)  allows you to 
select either color or monochrome modes. A monochrome image 
is significantly brighter than a color image.
To change color mode:
1Insert a coin or other flat object into dial on the top of the pro-
jector.
2Turn the dial to either color   or monochrome  .
FIG U R E 26
Cha nging colo r mo des 

29
Using the  Remote  and Keypad Buttons
This section provides an alphabetical reference to the remote and 
keypad buttons. 
FIGURE 27
Remo te con trol an d keypad
Bright ness     
Adjusting the brightness lightens or darkens the image.
•To darken the image, press  
•To lighten the image, press 
The 
brightness buttons are auto-repeating; they repeat their func-
tion as long as you hold down the button.
C om put er 
When you have more than one source (computer or video) con-
nected to the projector, you...

30
Using the Projector
Freeze 
The freeze  button  halts, or  “freezes”  the  projected image. Use this 
button to freeze a frame of video (the video continues to run but 
the image is frozen). You also can freeze an image from a com-
puter source on the screen, allowing you to perform other opera-
tions on the computer without the audience seeing them. Press 
freeze again when you want the image to return to normal.
Help 
Press help to display the online help information.
Light 
Press light to...

31
2Press the right disk mouse  button  to display the color  selector. 
Position the cursor on the desired color, then press  the left 
mouse button. Press the right button again to close the color 
selector.
3Move the pencil to where you want to start the annotation.
4Press the left mouse button on the disk mouse. The cursor 
changes to an upright pencil.
5Use the disk mouse to draw your annotation. Press the left 
mouse button to finish the annotation. 
6To exit Scribble, press the 
scrib ble button....

32
Using the Projector
Using the  Disk Mouse
NOTE : U si ng a l ight tou ch on th e
di sk m ous e o ften  gets  the bes t
resul ts.
Press anywhere on the edge  of  the disk mouse  to move the curs or 
on the screen. For example, if you press the top edge of the disk, 
the cursor moves up the screen; if you press the bottom edge, the 
cursor moves down (Figure 28). You can move the cursor at any 
angle by pressing the corresponding edge of the disk.
FIG U R E 28
Us ing the d is k mou se
Using the...

33
To change a menu setting, use the disk mouse to move the cursor 
to the setting you want to change, then use one of the two buttons 
below the disk mouse to make the changes.
The status bar at the top of each menu indicates the source that is 
currently active. For example, if you have both a computer and a 
video player connected, “Source: Computer” or “Source: Video” 
displays  depending on whether you’ve pressed the 
compu ter or 
th e 
video button.
 
FIGURE 30
On-screen  menu  statu s b ar 

34
Using the Projector
Display Menu Functi ons
FIG U R E 31
Displa y menu
Bright ness
NOTE : Ch an ging the b rightness
usin g the menu  is  the sa me as
cha ngin g i t usi ng the remote or
keypad.
Adjusting the brightness changes the intensity of the image.
•Press the left mouse button to darken the image.
•Press the right mouse button to lighten the image.
Contrast
Contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes 
the...

35
Audio Menu Functions
FIGURE 32
Au di o menu
NOTE: Cha ngin g th e vo lum e 
us ing th e m enu i s th e sam e a s 
cha nging it  usi ng the remote or 
keypad. Volume
Volume adjustments you make are saved for each source.
•Press the left mouse button to decrease the volume. 
•Press the right mouse button to increase the volume.
Mic Volum e
•
Press the left mouse button to decrease the microphone 
volume.
•Press the right mouse button to increase the microphone 
volume. 
Balance
Balance controls the...

36
Using the Projector
•
Press the right mouse button to increase the amount of sound 
coming from the right speakers.
Fade
Fade controls the balance between the internal and external 
speakers. The setting appears gray and won’t highlight if external 
speakers aren’t connected.
•Press the left mouse button to increase the amount of sound 
coming from the internal speakers.
•Press the right mouse button to increase the amount of sound 
coming from the external speakers.
Treble
Treble controls the higher...