InFocus Projector IN1100 User Manual

30
Advanced > Status/Service menu
Factory Reset: restores all settings to their default.
Projector Info: a read-only display  of
  current projector settings.
Reset Lamp Hours : resets the lamp h
 ours used counter in the Projector Info menu 
to zero. Do this only after changing the lamp.
Source Info : a read-only 
 display of current source settings.
Service Code : only used by 
 authorized service personnel.
Advanced > Status/Service menu 

31
Maintenance
Cleaning the lens
1Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
• Avoid using an excessive amount of  cleaner,
  and don’t apply the cleaner 
directly to the lens. Abrasive cleane rs, solvents or other harsh chemicals 
might scratch the lens.
2Lightly wipe the cleaning cloth over the lens in a circular motion.
Using the security lock
The projector has a security lock for use with a Cable Lock System. Refer to the 
information that came with the lock for instructions on...

32
Replacing the projection lamp
The lamp hours used timer in the Projector Info menu counts the number of hours 
the lamp has been in use. Twenty hours before the lamp life expires, the message 
“Change lamp” appears on the screen at startup.
• NOTE:  Y

ou can order new lamps from  www.infocus.com (in select areas), 
your retailer or your  dealer. Only genuine InFocus  lamps are tested for use in 
this projector. InFocus is not liable for the performance, safety or certification 
of any other lamps....

33
1
Turn off the projector and unplug the power cord.
2Wait 60 minutes to allow the projector to cool thoroughly.
3Turn the projector upside down on a soft 
cloth so that the lamp door is facing 
you.
4Loosen the two captive screws on th e lamp door and lift the door off.
5Loosen the two captive screws that attach the lamp housing to the projector.
6Carefully remove the lamp housing. Dispos e of the lamp in an environmentally 
proper manner.
7Install the new lamp housing and tighten the screws.
8Replace...

34
INDEX
Numerics
3D Control
3D 25
3D Sy

nc Invert 25
A
Advanced > Image > 3D Control Menu 25
B
Basic menu 24
Aspect Ratio 24
Auto Image 24
Brightness 24
Con

trast 24
Keystone 24
Preset 24
Sharpness 24
Volume 24
C
cleaning the lens 31
Color 25 Blue Gain 

25
Color 25
Color Space 25
Color Temp 25
Gamma 25
Green Gain 25
Red Gain 25
Tint 25
White Peaking 25
Computer In connector 6
connector panel 4 Audio in 4
Audio out 4
Composite video 4
HDMI 4 MINI USB Type B connector 4
S-video 4
VESA computer 4...

35
O
optimizing images 21
optimizing video 
22
Overscan 25, 26, 27, 28, 29
P
PC 25 F
 orce Wide 25
PC Screen Saver 25
Phase 25
Tracking 25
positioning the projector 5
Power connector 6
power cord 6
presentation features 21
projection distance 5
projector connector panel 4
customization 22
image size 5
keypad buttons 20
maintenance 31
menus 23
offset 5
positioning 5
registering 3
reset 30
safety considerations 2
security lock 31
setting up 5
shutting down 10
Status Indicator Panel 10
troubleshooting...