InFocus Projector IN1100 User Manual

20
Using the keypad buttons
menu navigation 
buttons
Most buttons are described in detail in other sections, but here is an overview of 
their functions:
Power –turns the projector on and off (page 7).
Auto Image –resynchronizes the projector to the source (page 25).
Presets –cycles through the availabl e preset settings (page 29).
Keystone –adjusts squareness of the image (page 8).
Up/Down/Left/Right arrows –navigates to and adjusts settings in the menus 
(page 23).
Menu–opens the onscreen menus (page...

21
Optimizing computer images
After your computer is connected properly and the computer’s image is on the 
screen, you can optimize the image us ing the onscreen menus. For general 
information on using the menus, see page 23.
• Adjust the Keystone, Contrast, or  
 Brightness in the Basic menu (page 24).
• Change the Aspect  Ratio. Choose the 
 option that best fits your input source 
(page  24).
• Adjust the Color Temperature in the Advanced > Image > Color Menu  (page  24).
• Adjust the Phase,...

22
Optimizing video images
After your video device is connected properly and the image is on the screen, you 
can optimize the image using the onscreen menus. For general information on using 
the menus, see  page 23.
• Adjust the Keystone, Contra st, Brightness, Color
 , or Tint in the Basic menu 
(page  24).
• Change the Aspect  Ratio. Choose the 
 option that best fits your input source 
(page  24).
• Select a Sharpness setting in the Basic menu ( page 24).
• Adjust the Color Temperature in the A...

23
Using the menus
To open the menus, press the Menu button on the keypad or remote. (The menu 
automatically closes after 60 seconds if  no buttons are pressed.) Use the up and 
down arrow buttons to highlight the de sired menu option and then press the Select 
or right arrow button.
To change the menu settings (or enter anot her submenu), highlight the desired menu 
option and press the  Select or right arrow button. Us e the left and right arrow 
buttons to scroll through the options a nd make...

24
Basic menu
To change the following menu settings (or enter the Advanced menu), highlight the 
desired menu option and press the  Select or right arrow button. Use the left and 
right arrow buttons to scroll through the  options and make adjustments. To save 
your adjustments, press  Select.
Aspect Ratio : is the ratio of 
 the image width to image height. TV screens are 
usually 4:3. HDTV and most DVDs are 16:9.
Select Auto to have the projector choos e 
the ratio. 
 Choose Native to see the...

25
Advanced > Image menu
3D Control:
•3D: to ggles between on and off. Turn  it 
 on to display the image in 3D.
• 3D Sync Invert : togg
 les between on and off. Turn it on when the image is 
discrete or overlapping.
Color:
• Color Space:  This 
 option applies to computer  and component video sources. It 
allows you to select a color space that ha s been specifically tuned for the input 
signal. When Auto is selected, the projector automatically determines the 
standard. To choose a diff erent setting,...

26
Advanced >  Setup menu
Audio Setup:
•Internal Speaker :
  allows the user to turn on and off the internal speaker.
• Powe r Sound : controls whether the projec tor makes a sound 
 when powered 
on and off. 
• Vo l u m e : adjusts 
 the volume level.
• Closed Captions : controls closed 
 caption display while audio is not muted. 
Closed Captions:
• Closed Captions
: controls closed 
 caption display while audio is not muted. If 
this setting is not off, a nd audio is not muted, and  the source is NTSC...

27
Keypad/Remote:
•Blank Key : sele
 cts what to display when the  Blank Key on the remote is 
pressed: your custom snapshot, a solid co lor screen (blue, black or white), the 
factory logo screen, a timer, or test patterns. The timer option is useful for 
classroom tests or brea k times during meetings. 
• Custom Key : 
allows you to assign a dif
 ferent function to the Custom button, 
allowing you to quickly and ea sily use the effect. Highlight an effect and press 
Select to choose a different one.
•...

28
Pin Settings: 
• Change PIN:
To enter the PIN at projector startup:
Power
  up the projector. The Enter PIN  dialog box appears after th
 e startup screen. 
Enter the PIN. Use the navigation buttons on the remote or keypad to enter the 
correct button press sequence. See the  description above for instructions.
To change the PIN:
Select Change PIN... in the  Setup me nu. Enter the existing PIN. 
 Enter the new 
PIN. You can navigate betw een OK and Cancel by pressing  the left and right arrow 
keys....

29
Source:
•Powe r-up Source : 
 determines which source the projector checks first for 
active video during power-up.
• Se
arch Screen : 
 allows you to display a blank  screen instead of the default 
screen at startup when no source is de tected. Options include the factory logo 
screen, a custom Snapshot, or a blue, black or white screen.
• Auto S ource:
  When this feature is On, the projector automatically finds the 
active source, checking the selected Power-up Source first. When this feature 
is...