IBM Thinkpad R40 R40e Manual

							1140 Bluetooth antenna assembly
For access, remove these FRUs, in order:
vª1010 Battery packº on page 64
vª1060 Keyboardº on page 73
vª1100 Hinge coverº on page 87
For machine type 2681, 2682, 2683, 2722, 2723, 2724
Note:Some models do not have the Bluetooth antenna.
1
1
2
a
Step Screw (quantity) Torque
«1¬M2.0 ý 3.5 mm, Silver (1) 0.294 Nm
(3 kgfcm)
When installing:Route the Bluetooth antenna cable to fit
firmly inside the cable guides on the
base cover as shown in the figure«a¬.
Removing and replacing a FRU
ThinkPad R4097 
						

							1150 LCD assembly
For access, remove these FRUs, in order:
vª1010 Battery packº on page 64
vª1050 Mini PCI adapterº on page 70
vª1060 Keyboardº on page 73
vª1100 Hinge coverº on page 87
vª1110 Communication daughter card (CDC)º on page 88
1
Step Screw (quantity) Torque
«1¬M2.5 ý 8.5 mm, Black (1) 0.294 Nm
(3 kgfcm)
(continued)
Removing and replacing a FRU
98ThinkPad R40 
						

							3
2
Step Screw (quantity) Torque
«2¬M2.5 ý 6 mm, Yellow (1) 0.294 Nm
(3 kgfcm)
(continued)
Removing and replacing a FRU
ThinkPad R4099 
						

							6
6
5
4
Step Screw (quantity) Torque
«4¬M2.0 ý 3.5 mm, Silver (2) 0.294 Nm
(3 kgfcm)
«6¬M2.5 ý 8.5 mm, Black (4) 0.294 Nm
(3 kgfcm)
(continued)
Removing and replacing a FRU
100ThinkPad R40 
						

							7
7
Removing and replacing a FRU
ThinkPad R40101 
						

							When installing:Make sure that the antenna cables are
routed along the cable holder as shown
in this figure, and then attach the LCD
assembly to the base cover by securing
the screws.
Removing and replacing a FRU
102ThinkPad R40 
						

							1160 Keyboard bezel
For access, remove these FRUs, in order:
vª1010 Battery packº on page 64
vª1050 Mini PCI adapterº on page 70
vª1060 Keyboardº on page 73
vª1100 Hinge coverº on page 87
vª1150 LCD assemblyº on page 98
For machine type 2681, 2682, 2683, 2722, 2723, 2724
1
1
1
1
1
2
2
2
1
Step Screw (quantity) Torque
«1¬M2.5 ý 8.5 mm, Black (6) 0.294 Nm
(3 kgfcm)
«2¬M2.5 ý 6 mm, Yellow (3) 0.294 Nm
(3 kgfcm)
(continued)
Removing and replacing a FRU
ThinkPad R40103 
						

							If the ThinkPad computer you are servicing has the touch
pad, detach the connector«a¬before removing the screws.
a
When installing:If the ThinkPad computer you are
servicing has the touch pad, make sure
that the connector«a¬is firmly attached.
(continued)
Removing and replacing a FRU
104ThinkPad R40 
						

							Remove the keyboard bezel in the direction of arrow«2¬.
2
2
Removing and replacing a FRU
ThinkPad R40105 
						

							For machine type 2684, 2685
1
1
1
1
1
2
2
2
1
Step Screw (quantity) Torque
«1¬M2.5 ý 8.5 mm, Black (6) 0.294 Nm
(3 kgfcm)
«2¬M2.5 ý 6 mm, Yellow (3) 0.294 Nm
(3 kgfcm)
(continued)
Removing and replacing a FRU
106ThinkPad R40