Home > HP > Printer > HP PhotoSmart C7283 User Manual

HP PhotoSmart C7283 User Manual

Here you can view all the pages of manual HP PhotoSmart C7283 User Manual. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 61

DHCPDynamic Host Configuration Protocol. A server on the network that supplies
configuration parameters to devices on the network. On small networks, this
could be a router.
DNSDomain Name Service. When you use the Web or send an e-mail message,
you use a domain name to do it. For example, the URL http://www.hp.com
contains the domain name hp.com. The  DNS on the Internet translates the
domain name into an IP address. Devices use the IP addresses to refer to
one another.
DNS-SDSee DNS. The SD portion...

Page 62

routerA router provides a bridge between two or more networks. A router can link
a network to the Internet, link two networks and connect both to the Internet,
and help secure networks through the use of firewalls and assigning dynamic
addresses. A router can also act as a gateway, while a switch cannot.
SSIDThe SSID or network name identifies a wireless network.
switchA switch makes it possible for several users to send information over a
network at the same time without slowing each other down....

Page 63

Norwaywww.hp.no/faxconfig
Irelandwww.hp.com/ie/faxconfig
Francewww.hp.com/fr/faxconfig
Italywww.hp.com/it/faxconfig
This section contains the following topics:
•
Change settings on the HP All-in-One to receive faxes
•
Test your fax setup
•
Set the fax header
•
Set up speed dialing
Related topics
“
Use the fax features” on page 131
Change settings on the HP All-in-One to receive faxes
In order to receive faxes successfully, you might need to change some settings on the
HP All-in-One. If you are unsure...

Page 64

For example, set your answering machine to a low number of rings and the HP All-in-One
to answer in the maximum number of rings. (The maximum number of rings varies by
country/region.) In this setup, the answering machine will answer the call and the HP All-
in-One will monitor the line. If the HP All-in-One detects fax tones, the HP All-in-One will
receive the fax. If the call is a voice call, the answering machine will record the incoming
message.
To set the number of rings before answering from the...

Page 65

•Checks for an active phone line
• Tests the status of your phone line connection
The HP All-in-One prints a report with the result s of the test. If the test fails, review the
report for information on how to fix the problem and rerun the test.
To test your fax setup  from the control panel
1. Set up the HP All-in-One for faxing according to your particular home or office setup
instructions.
2. Insert the ink cartridges and load full-size paper in the input tray before starting the
test.
3. Press...

Page 66

Set up speed dialing
You can assign speed dial entries to fax numbers you use often. This lets you dial those
numbers quickly by using the control panel.
This section contains the following topics:
•
Set up individual speed dial entries
•
Set up group speed dial entries
•
Delete speed dial entries
•
Print the speed dial list
Set up individual speed dial entries
You can create speed dial entries for fax numbers that you use frequently. If necessary,
you can also edit the name or fax number of a speed...

Page 67

Update individual speed dial entries
You can edit the name or fax number in a speed dial entry from the control panel or from
your computer by using the software that you installed with the HP All-in-One.
To update a speed dial entry from the control panel
1.Press  Setup.
2. Press 
 to highlight  Speed Dial Setup , and then press OK.
3. Press 
 to highlight  Individual Speed Dial , and then press OK.
The first unassigned speed dial entry appears on the display.
4. Press 
 or  to scroll through the speed...

Page 68

5.Press  or  to scroll through the individual speed dial entries you set up, and then
press  OK to select the appropriate entry. Repeat this step for each number you want
to add to the group speed dial.
6. When you are done, press 
 to highlight  Done Selecting , and then press  OK.
The visual keyboard appears on the display.
7. Use the visual keyboard to enter a name for the group speed dial. When you are
finished, highlight  Done on the visual keyboard, and then press  OK.
8. Press  OK to add another...

Page 69

Chapter 4
68 Finish setting up the HP All-in-One
Finish setup
 

Page 70

5 How do I?
This section contains links to commonly performed tasks, such as printing photos,
scanning, making copies, and faxing.
•“
How do I print 10 x 15 cm (4 x 6) inch borderless photos from a memory card?”
on page 104
•“
How do I make reprints of a photo in a variety of sizes?” on page 115
•“
How do I make a black-and-white or color copy of a document?” on page 121
•“
How do I print 13 x 18 cm (5 x 7) inch or larger size photos from a memory card?”
on page 104
•“
How do I save photos to my...
Start reading HP PhotoSmart C7283 User Manual

Related Manuals for HP PhotoSmart C7283 User Manual

All HP manuals