HP PhotoSmart C7283 User Manual

Pulse Dialing. Contact your local telephone company if you are unsure which setting to
use.
NOTE: If you select  Pulse Dialing , some phone system features might not be
available. It can also take longer to dial a fax or phone number.
NOTE: This feature is not supported in all countries/regions. If it is not supported in
your country/region,  Tone or Pulse Dialing  does not appear in the  Basic Fax
Setup  menu.
To set tone or pulse dialing from the control panel
1.Press  Setup.
2. Press 
 to highlight...

Wireless Technology into the front USB port, Bluetooth® devices such as PDAs and
camera phones can print to the HP All-in-One.
NOTE: In the remainder of this chapter, the HP bt450, Printer and PC Adapter with
Bluetooth® Wireless Technology is referred to simply as an HP bt450.
This section contains the following topics:
•
Supported connection types
•
Connect using Ethernet
•
Connect using integrated wireless WLAN 802.11
•
Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless...

Connect using integrated wireless WLAN 802.11
The HP All-in-One uses an internal networking component that supports a wireless
network. For detailed instructions on connecting the HP All-in-One to a wireless (802.11)
network, see “
Integrated wireless WLAN 802.11 network setup” on page 39 .
Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless
Technology
HP bt450, Printer and PC Adapter with Bluetooth® Wireless Technology allows you to
print images from most Bluetooth devices,...

5.When you have finished entering a name for the HP All-in-One, press  OK.
The name you entered will appear on your Bluetooth device when you connect to the
HP All-in-One to print.
6. Press  OK to exit the  Setup menu.
Related topics
“
Text and symbols” on page 18
Set Bluetooth security  for the HP All-in-One
You can enable printer security settings through the  Bluetooth menu on the HP All-in-
One. Press  Setup on the control panel, and select  Bluetooth. From the Bluetooth  menu,
you can:
• Require...

6.Press  until  Security Level  is highlighted, and then press  OK.
7. Press  OK to select  High.
High level security requires authentication.
Passkey authentication is now set for the HP All-in-One.
Related topics
“
Text and symbols” on page 18
Set the HP All-in-One to be invisible to Bluetooth devices
You can set the HP All-in-One to be either  Visible to all Bluetooth devices (public) or
Not visible  to any (private).
• Visible to all : Any Bluetooth device within range can print to the HP...

NOTE:The only software functionality available with a Bluetooth connection is
printing. Scanning and software-based faxing cannot be done over a Bluetooth
connection. However, stand-alone copy  and fax functions are still available.
Before you print, you must connect an HP bt450, Printer and PC Adapter with
Bluetooth® Wireless Technology to the HP All-in-One.
You must have Windows XP or Windows Vista and either the Microsoft Bluetooth
®
Protocol Stack or the Widcomm Bluetooth® Protocol Stack installed...

To install and print using the Widcomm stack
1.Make sure that you have installed the HP All-in-One software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver
is available for the Bluetooth® connection. Therefore, if you have already installed
the software, you do not need to reinstall it. If you want both a USB and a
Bluetooth
® connection to the HP All-in-One, install the USB connection first. For
more information, see the Setup Guide. However, if you do...

If you want to:See this section:
Change the HP All-in-One from a USB
connection to a network connection.
NOTE:Use the instructions in this section if
you first installed the HP All-in-One with a USB
connection, and you now want to change to
either a wireless or Ethernet network
connection.“Change the HP All-in-One from a USBconnection to a network connection”
on page 47
View or change the network settings.“Manage your network settings” on page 48
Find troubleshooting information.“Network...

What you need for a wired network
Before you connect the HP All-in-One to a network, make sure you have all of the required
materials.
❑A functional Ethernet network that includes a router, switch, or hub with an Ethernet
port.
❑ CAT-5 Ethernet cable.
Although standard Ethernet cables look similar to standard telephone cables, they
are not interchangeable. There is a different number of wires in each one, and each
has a different connector. An Ethernet cable connector (also called an RJ-45
connector) is...

2.Connect the Ethernet cable to the Ethernet port on the back of the HP All-in-One.
3.Connect the other end of the Ethernet c able to an available port on your Ethernet
router or switch.
4. Once you have connected th e HP All-in-One to the network, install the software.
Related topics
“
Install the software for a network connection” on page 46
Integrated wireless WLAN 802.11 network setup
For optimal performance and security in your wireless network, HP recommends you use
a wireless router or access...