HP Photosmart C4480 User Manual

To clean the glass
1.Turn off the product, unplug the power cord, and raise the lid.
2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the product.
3. Dry the glass with a dry, soft, lint-free cloth to prevent spotting.
4. Turn on the product....

Print a self-test report
If you are experiencing problems with printing, print a self-test report before you replace
the print cartridges. This report provides useful information on several aspects of your
product, including your print cartridges.
To print a self-test report
1. Load letter or A4 unused plain white paper into the input tray.
2. Press and hold the  Cancel button and then press the  Start Copy Color button.
The product prints a self-test report, which might indicate the source of the...

This section contains the following topics:
•
Handle the print cartridges
•
Check the estimated ink levels
•
Replace the print cartridges
•
Use a photo print cartridge
•
Use the print cartridge protector
•
Remove ink from y our skin and clothing
•
Ink-backup mode
•
Advanced print cartridge maintenance
Handle the print cartridges
Before you replace or clean a print cartridge, you should know the part names and how
to handle the print cartridges.
1Copper-colored contacts
2Plastic tape with pink pull tab...

TIP:You can also print a self-test report to see if your print cartridges might need to
be replaced.
NOTE: If the print cartridges were used before being installed in the product, or have
been refilled, the estimated ink levels on the  Estimated Ink levels tab may be
inaccurate or unavailable.
NOTE: Ink from the cartridges is used in the printing process in a number of different
ways, including in the initialization process, which prepares the product and cartridges
for printing, and in print head...

To replace the print cartridges
1.Make sure the product is turned on.
CAUTION: If the product is turned off when you open the print cartridge door to
access the print cartridges, it will not release the cartridges for changing. You
might damage the product if the print cartridges are not docked safely when you
try to remove them.
2. Make sure you have letter or A4 unused plain white paper loaded in the input tray.
3. Open the print cartridge door.
The print carriage moves to the far right side of the...

If you are replacing the black or photo print cartridge, remove the print cartridge from
the slot on the right.
1Print cartridge slot for the tri-color print cartridge
2Print cartridge slot for the black and photo print cartridges
TIP:If you are removing the black print cartridge in order to install the photo print
cartridge, store the black print cartridge in the print cartridge protector or an airtight
plastic container.
5. Remove the new print cartridge from its packaging and, being careful to touch...

6.Hold the print cartridge with the HP logo on top, and insert the new print cartridge into
the empty cartridge slot. Make sure you push the print cartridge in firmly until it snaps
into place.
If you are installing the tri-color print cartridge, slide it into the left slot.
If you are installing a black or photo print cartridge, slide it into the right slot.
7.Close the print cartridge door.
8.When prompted, press  OK.
The product prints a print cartridge alignment page.
NOTE: If you have colored paper...

Related topics
“
Align the print cartridges” on page 78
Use a photo print cartridge
You can optimize the quality of the color photos you print and copy with the HP All-in-
One by purchasing a photo print cartridge. Remove the black print cartridge and insert
the photo print cartridge in its place. With the tri-color print cartridge and photo print
cartridge installed, you have a six-ink  system, which provides  enhanced quality color
photos.
When you want to print regular text documents, swap the black...

To insert a print cartridge into the print cartridge protector
▲Place the print cartridge into the print cartridge protector at a slight angle and snap it
securely into place.
To remove the print cartridge from the print cartridge protector
▲Press down on the top of the print cartridge protector to release the print cartridge,
and then gently remove the print cartridge out of the print cartridge protector.
Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and...

Ink-backup mode
Use the ink-backup mode to operate the HP All-in-One with only one print cartridge. The
ink-backup mode is initiated when a print cartridge is removed from the print cartridge
carriage. During ink-backup mode, the product can only print jobs from the computer.
You cannot initiate a print job from the control panel (such as copying or scanning an
original).
NOTE: When the HP All-in-One operates in ink-backup mode, a message is
displayed on screen. If the me ssage is displayed and two...