HP Photosmart C4480 User Manual

Chapter 7
48 Print from your computer
Print
 

8 Use the photo features
The HP All-in-One is equipped with memory card slots which enable you to insert a
memory card and begin printing photos from your digital camera without uploading your
photos to a computer first. Additionally, if the HP All-in-One is connected to a computer
with a USB cable, you can also transfer your photos to the computer to print, edit, or
share.
This section contains the following topics:
•
Insert a memory card
•
Print photos
•
Save photos to your computer
•
Edit photos...

To insert a memory card
1.Make sure the product is on.
2. Insert the memory card into the appropriate slot.
The memory card has a Photo light (below the camera icon) that indicates the status
of the memory card. When it is solid green, your photos are ready to be viewed.
CAUTION: Do not pull out the memory card while the Photo light is flashing. A
flashing light means the product is accessing the memory card. Wait until the light
remains solid. Removing a memory card while it is being accessed might...

3.Press the buttons next to the up arrow or down arrow icons on the display to scroll
through the photos on your memory card until the photo you want to print appears.
4. Press  Settings .
5. Leave the default  Size setting as  Borderless .
6. Press the button next to  Prints/Total to increase the number of copies you want to
print of the current image.
The first number on the display indicates how many copies of the current image will
be printed. The second number indicates how many total prints are in...

6.Press the button next to  Prints/Total to increase the number of copies you want to
print of the current image.
The first number on the display indicates how many copies of the current image will
be printed. The second number indicates how many total prints are in the print queue.
7. Press  OK.
8. Repeat steps 3 through 7 to add photos to the print queue.
9. Press the button next to  Print on the display.
TIP: While the photo is printing, you can continue scrolling through the photos
on your memory...

NOTE:Not all digital cameras enable you to tag your photos for printing. See the
documentation that came with your digital camera to see if your camera supports
DPOF file format 1.1.
To print camera-selected photos using the DPOF standard
1. Insert your memory card into the appropriate slot on the product.
2. When prompted, do one of the following:
• Select  OK to print all DPOF-tagged photos.
• Select  CANCEL to bypass DPOF printing.
Save photos to your computer
You can use the HP Photosmart Software...

Share photos with friends and relatives
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the HP All-in-One.
NOTE:The HP All-in-One must be connected to a computer that has the
HP...

9 Use the copy features
The HP All-in-One allows you to produce high-quality color and black-and-white copies
on plain or photo paper. You can enlarge or reduce the size of an original to fit a specific
paper size, adjust the copy quality, and make high-quality copies of photos, including
borderless copies.
This section contains the following topics:
•
Make a copy
•
Change the copy settings for the current job
•
Perform special copy jobs
•
Stop copying
Make a copy
You can make quality copies from the...

Change the copy settings for the current job
You can customize the copy settings of the HP All-in-One to handle nearly any copy task.
This section contains the following topics:
•
Make multiple copies of the same original
•
Change copy speed or quality
Make multiple copies of the same original
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
NOTE: For...

4.Press the button next to  Copies to increase the number of copies. When you reach
the maximum, the settin g returns to 1 copy.
TIP:Use the software that you installed with the product to set a higher number
of copies. When the number of copies is greater than 9, only the last digit of the
number of copies is displayed on the control panel.
5. Press  OK.
6. Press the button next to  Start Copy Black or Start Copy Color .
In this example, the product makes six copies of the original 10 x 15 cm (4 x 6...