HP Pavilion Dv6100 Entertainment Notebook Pc Series Service Guide
Here you can view all the pages of manual HP Pavilion Dv6100 Entertainment Notebook Pc Series Service Guide. The HP manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 141
Removal and Replacement Procedures Maintenance and Service Guide 5–25 8. Release the zero insertion force (ZIF) connector 1 to which the LED board cable is connected and disconnect the cable2 from the LED board. 9. Remove the switch cover. Disconnecting the LED Board Cable Reverse the above procedure to install the switch cover.
Page 142
5–26 Maintenance and Service Guide Removal and Replacement Procedures 5.11 Keyboard 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the switch cover (Section 5.10). Keyboard Spare Part Number Information For use with all computer models in the following countries or regions: Belgium The Czech Republic France French Canada Germany Greece The Netherlands and Europe Israel441427-A41 441427-221 441427-051 441427-121 441427-041 441427-151 441427-B31 441427-BB1Italy Portugal Russia Saudi...
Page 143
Removal and Replacement Procedures Maintenance and Service Guide 5–27 3. Remove the four Phillips PM2.5×7.0 screws that secure the keyboard to the computer. Removing the Keyboard Screws
Page 144
5–28 Maintenance and Service Guide Removal and Replacement Procedures 4. Turn the computer display-side up with the front panel toward you. 5. Open the computer as far as possible. 6. Lift the rear edge of the keyboard 1 until it rests at an angle. 7. Slide the keyboard 2 back to disengage the tabs on the front edge of the keyboard from the top cover. 8. Swing the keyboard 3 forward until it rests on the palm rest. Releasing the Keyboard
Page 145
Removal and Replacement Procedures Maintenance and Service Guide 5–29 9. Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board. Disconnecting the Keyboard Cable 10. Remove the keyboard. Reverse the above procedure to install the keyboard.
Page 146
5–30 Maintenance and Service Guide Removal and Replacement Procedures 5.12 Speaker Assembly 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the switch cover (Section 5.10). 3. Remove the keyboard (Section 5.11). 4. Disconnect the speaker assembly cable 1 from the power button board. 5. Remove the two Phillips PM2.5×4.0 screws 2 that secure the speaker assembly to the computer. 6. Remove the speaker assembly 3. Removing the Speaker Assembly Reverse the above procedure to install the...
Page 147
Removal and Replacement Procedures Maintenance and Service Guide 5–31 5.13 Power Button Board 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the switch cover (Section 5.10). 3. Remove the keyboard (Section 5.11). 4. Disconnect the microphone cable 1 and the speaker assembly cable 2 from the power button board. 5. Release the ZIF connector 3 to which the power button board is connected and disconnect the cable 4. 6. Remove the power button board cable from the clip 5 in the top...
Page 148
5–32 Maintenance and Service Guide Removal and Replacement Procedures 7. Remove the two Phillips PM2.0×3.0 screws 1 that secure the power button board to the computer. 8. Remove the power button board 2. Removing the Power Button Board Reverse the above procedure to install the power button board.
Page 149
Removal and Replacement Procedures Maintenance and Service Guide 5–33 5.14 Display Assembly 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: ❏Memory module compartment cover (Section 5.8) ❏Switch cover (Section 5.10) ❏Keyboard (Section 5.11) ❏Speaker assembly (Section 5.12) Display Assembly Spare Part Number Information For use with full-featured computer models with camera (includes camera, camera cable, and microphones) 15.4-inch, WXGA, TFT with BrightView...
Page 150
5–34 Maintenance and Service Guide Removal and Replacement Procedures 2. Close the computer. 3. Turn the computer upside down with the rear panel toward you. 4. Make note of which wireless antenna cable is attached to which antenna clip on the Mini Card module before disconnecting the cables. Then disconnect the cables 1 from the module. 5. Remove the two Phillips PM2.5×7.0 screws 2 that secure the display assembly to the computer. Removing the Display Assembly Screws