HP Pavilion Dv6100 Entertainment Notebook Pc Series Service Guide

Removal and Replacement Procedures
Maintenance and Service Guide 5–65
7. If it is necessary to replace the USB/power connector board 
cable or the audio board cable, turn the system board upside 
down with the front toward you.
8. Disconnect the audio board cable 1 and the USB/power 
connector board cable 2 from the system board.
Removing the System Board Cables
Reverse the above procedure to install the system board, 
USB/power connector board cable, and audio board cable. 

5–66 Maintenance and Service Guide
Removal and Replacement Procedures
5.21 Fan/Heat Sink Assembly
✎When replacing the fan/heat sink assembly, be sure the power 
button board is removed from the defective fan/heat sink 
assembly and installed on the replacement fan/heat sink 
assembly. Refer to Section 5.13, “Power Button Board,” for 
power button board removal information.
1. Prepare the computer for disassembly (Section 5.3) and 
remove the following components:
❏Hard drive (Section 5.4)
❏Optical drive...

Removal and Replacement Procedures
Maintenance and Service Guide 5–67
❏To p  c o v e r  (Section 5.15)
❏Audio board (Section 5.16)
❏USB/power connector board (Section 5.19)
❏System board (Section 5.20)
2. Turn the system board upside down with the expansion 
port 3 and external monitor port toward you.
3. Disconnect the fan cable 1 from the system board.
4. Remove the four Phillips PM2.5×5.0 screws 2 that secure the 
fan/heat sink assembly to the system board.
5. Remove the fan/heat sink assembly 3....

5–68 Maintenance and Service Guide
Removal and Replacement Procedures
✎The thermal pads and thermal paste should be thoroughly 
cleaned from the surfaces of the fan/heat sink assembly 1, 2, 
and 3, the system board components 4 and 6, and the 
processor 5 each time the fan/heat sink assembly is removed. 
Thermal pads and thermal paste should be installed on all 
surfaces before the fan/heat sink assembly is reinstalled. 
Thermal pads and thermal paste are included with all fan/heat 
sink assembly, system...

Removal and Replacement Procedures
Maintenance and Service Guide 5–69
5.22 Processor
1. Prepare the computer for disassembly (Section 5.3) and 
remove the following components:
❏Hard drive (Section 5.4)
❏Optical drive (Section 5.9)
❏Switch cover (Section 5.10)
❏Keyboard (Section 5.11)
❏Speaker assembly (Section 5.12)
Processor Spare Part Number Information
Intel Core Duo T7200 (2.00-GHz)
Intel Core Duo T1350 (1.86-GHz)
Intel Core Duo T5600 (1.83-GHz)
Intel Core Duo T5200 (1.66-GHz), use with dv6200
Intel...

5–70 Maintenance and Service Guide
Removal and Replacement Procedures
❏Display assembly (Section 5.14)
❏To p  c o v e r  (Section 5.15)
❏Audio board (Section 5.16)
❏USB/power connector board (Section 5.19)
❏System board (Section 5.20)
2. Turn the processor locking screw 1 one-half turn 
counterclockwise until you hear a click.
3. Lift the processor 2 straight up and remove it.
✎The gold triangle 3 on the processor should be aligned with 
the triangle icon 4 embossed on the processor socket when 
you...

Maintenance and Service Guide 6–1
6
Specifications
This chapter provides physical and performance specifications.
Ta b l e  6 - 1
Computer
Dimensions
Length
Width
Height (varies front to rear)35.7 cm
25.7 cm
4.1 cm14.05 in
10.12 in
1.57 in
Weight (varies by configuration) 2.7 kg 5.8 lb
Stand-alone power requirements
Operating voltage
Operating current18.5 V dc —19.0 V dc
3.5 A or 4.74 A
Temperature
Operating*
Nonoperating5°C to 35°C
-20°C to 60°C41°F to 95°F
-4°F to 140°F
Relative humidity...

6–2 Maintenance and Service Guide
Specifications
Shock
Operating
Nonoperating125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating
Nonoperating0.75 g zero-to-peak, 10 Hz to 500 Hz, 
0.25 oct/min sweep rate
1.50 g zero-to-peak, 10 Hz to 500 Hz, 
0.5 oct/min sweep rate
*Applicable product safety standards specify thermal limits for plastic surfaces. 
The computer operates well within this range of temperatures.
Ta b l e  6 - 1
Computer 
(Continued) 

Specifications
Maintenance and Service Guide 6–3
Ta b l e  6 - 2
15.4-inch, WXGA, SVA Display
Dimensions
Height
Width
Diagonal20.7 cm
33.1 cm
39.1 cm8.15 in
13.03 in
15.39 in
Number of colorsUp to 16.8 million
Contrast ratio200:1
Brightness160 nits typical
Pixel resolution
Pitch
For mat
Configuration0.259 × 0.259 mm
1280 × 800
RGB vertical stripe
BacklightEdge lit
Character display80 × 25
Total power consumption4 W
Viewing angle+/-65° horizontal, +/-50° vertical typical 

6–4 Maintenance and Service Guide
Specifications
Ta b l e  6 - 3
Hard Drives
200-GB* 160-GB*
Dimensions
Height
Width
Weight9.5 mm
70 mm
99 g9.5 mm
70 mm
102 g
Interface typeATA - 7 ATA - 7
Transfer rate
Synchronous (maximum)
Security150 MB/sec
ATA  s e c u r i t y150 MB/sec
ATA security
Seek times (typical read, including setting)
Single track
Average
Maximum2 ms
12ms
22 ms2 ms
12 ms
21 ms
Logical blocks
†390,721,968 312,581,808
Disk rotational speed4200 rpm 5400 rpm
Operating temperature0°C to 60°C...