HP Pavilion Dv6100 Entertainment Notebook Pc Series Service Guide

Removal and Replacement Procedures
Maintenance and Service Guide 5–45
31. If it is necessary to replace the camera cable, release the 
retention tabs 1 built into the display enclosure that secure 
the camera cable to the display enclosure.
32. Remove the camera cable 2 from the display enclosure.
Removing the Camera Cable
Reverse the above procedure to reassemble and install the 
display assembly
Display Assembly Subcomponents
Spare Part Number Information
Display Cable Kit (includes camera cable)...

5–46 Maintenance and Service Guide
Removal and Replacement Procedures
5.15 Top Cover
1. Prepare the computer for disassembly (Section 5.3) and 
remove the following components:
❏Hard drive (Section 5.4)
❏Optical drive (Section 5.9)
❏Switch cover (Section 5.10)
❏Keyboard (Section 5.11)
❏Speaker assembly (Section 5.12)
❏Display assembly (Section 5.14)
Top Cover Spare Part Number Information
Top covers (include TouchPad and TouchPad cable)
For use with full-featured computer models
For use with defeatured...

Removal and Replacement Procedures
Maintenance and Service Guide 5–47
2. Turn the computer upside down with the front toward you.
3. Remove the nine Phillips PM2.5×7.0 screws that secure the 
top cover to the computer.
Removing the Top Cover Screws, Part 1 

5–48 Maintenance and Service Guide
Removal and Replacement Procedures
4. Remove the three Phillips PM2.5×2.0 screws 1 and the 
three Phillips PM2.5×7.0 screws 2 that secure the top cover 
support trim to the computer.
Removing the Top Cover Screws, Part 2 

Removal and Replacement Procedures
Maintenance and Service Guide 5–49
5. Turn the computer right-side up with the front toward you.
6. Release and disconnect the following ZIF cables from the 
system board:
1 Power button board cable
2 LED board cable
3 TouchPad cable
Disconnecting the Top Cover Cables 

5–50 Maintenance and Service Guide
Removal and Replacement Procedures
7. Remove the Phillips PM2.5×7.0 screw 1 that secures the top 
cover support trim to the computer.
8. Remove the two Phillips PM2.5×7.0 screws 2 that secure the 
top cover to the computer.
Removing the Top Cover Screws, Part 3 

Removal and Replacement Procedures
Maintenance and Service Guide 5–51
9. Remove the top cover support trim 1.
10. Lift the rear edge of the top cover 2 until it disengages from 
the computer.
11. Remove the top cover.
Removing the Top Cover
Reverse the above procedure to install the top cover. 

5–52 Maintenance and Service Guide
Removal and Replacement Procedures
5.16 Audio Board
1. Prepare the computer for disassembly (Section 5.3) and 
remove the following components:
❏Hard drive (Section 5.4)
❏Optical drive (Section 5.9)
❏Switch cover (Section 5.10)
❏Keyboard (Section 5.11)
❏Speaker assembly (Section 5.12)
❏Display assembly (Section 5.14)
❏To p  c o v e r  (Section 5.15)
Audio Board Spare Part Number Information
For use with full-featured computer models (includes 
infrared lens)
For use...

Removal and Replacement Procedures
Maintenance and Service Guide 5–53
2. Remove the two Phillips PM2.5×5.0 screws 1 that secure the 
audio board to the computer.
3. Slide the audio board 2 back to disengage the audio 
connectors from the base enclosure.
4. Remove the audio board 3.
5. Disconnect the audio board cable 4 from the audio board.
Removing the Audio Board
Reverse the above procedure to install the audio board. 

5–54 Maintenance and Service Guide
Removal and Replacement Procedures
5.17 Bluetooth Module
1. Prepare the computer for disassembly (Section 5.3) and 
remove the following components:
❏Hard drive (Section 5.4)
❏Optical drive (Section 5.9)
❏Switch cover (Section 5.10)
❏Keyboard (Section 5.11)
❏Speaker assembly (Section 5.12)
❏Display assembly (Section 5.14)
❏To p  c o v e r  (Section 5.15)
Bluetooth Module Spare Part Number Information
Bluetooth module (includes Bluetooth module cable) 412766-002