HP P2055 Manual

Configuration page
The configuration page lists the current settings and properties of the product. It also contains a status
log report. To print a configuration page, do one of the following:
● Press and hold the 
Go button for 5 seconds when the product Ready light is on and no other jobs
are printing.
● Select it from the 
Print Information Pages drop-down list on the  Services tab in Printer
Preferences .
Supplies Status page
You can print the Supplies Status page by selecting it from the  Print...

Use the HP ToolboxFX software (HP LaserJet P2050 Series
Printers only)
HP ToolboxFX is a program that you can use to complete the following tasks:
●Check the product status.
● Configure the product settings.
● View troubleshooting information.
● View online documentation.
You can view HP ToolboxFX when the product is di rectly connected to a computer or when it is
connected to the network. You must perform the  recommended full software installation to use
HP ToolboxFX.
View HP ToolboxFX
Open HP...

Status
The Status  folder contains links to the following main pages:
● Device status
. This page indicates product conditions such as a jam or an empty tray. After you
correct a problem, click  Refresh status to update the product status.
● Supplies status
. View details such as the estimated percent of toner remaining in the print
cartridge and the number of pages that have been printed with the current print cartridge. This page
also has links for ordering supplies and for finding recycling...

Alerts
The Alerts  folder contains links to the following main pages:
● Set up Status Alerts
. Set up the product to send you pop-up alerts for certain events, such as low
toner levels.
● Set up E-mail Alerts
. Set up the product to send you e-mail alerts for certain events, such as low
toner levels.
Set up Status Alerts
Use this to set up the product so that it sends alerts  to your computer when jams, low levels of toner in
HP print cartridges, a non-HP print cartridge in use, empty input trays, and...

Device Settings
The Device Settings  folder contains links to  the following main pages:
● Device Information
. View information such as the prod uct description and a contact person.
● Paper Handling
. Configure trays or change the product  paper-handling settings, such as default
paper size and default paper type.
● Printing
. Change the default product print setti ngs, such as number of copies and paper
orientation.
● PCL 6
. Change the PCL settings.
● PCL 5c
. Change the PCL settings.
● PostScript
....

Paper Handling
Use these options to configure your default settings. These are the same options that are available on
the control-panel menus on the control panel. For more information, see 
Control panel on page 21 .
The following options are available for handling print jobs when the product is out of media:
● Select 
Wait for paper to be loaded .
● Select 
Cancel  from the  Paper out action  drop-down list to cancel the print job.
● Select 
Override  from the Paper out time  drop-down list to send the...

●Print density
. For increased print density, select a  higher number. For decreased print density,
select a lower number.
● EconoMode. Turn EconoMode on when you are printi
ng average print jobs. EconoMode is a
feature that allows the product to use less toner  per page. Selecting this option might extend the
life of the toner supply and might reduce cost per page. However, it reduces print quality. The
printed image is lighter, but it is adequate for  printing drafts or proofs. HP does not recommend...

you must connect before you can visit these Web sites. Connecting might require that you close
HP ToolboxFX and reopen it.
● HP Instant Support
. Connects to the HP Instant Support Web site.
● Support and Troubleshooting
. Connects to the support site for the product where you can search
for help with a specific problem.
● Product Registration
. Connects to the HP product registration Web site.
56 Chapter 4   Manage and maintain ENWW 

Manage a network product
Embedded Web server (HP LaserJet P2055dn, HP LaserJet P2055x, and
HP LaserJet P2035n only)
The embedded Web server allows you to view pr oduct and network status and to manage printing
functions from your computer. Use the em bedded Web server for the following tasks:
● View product status information
● Determine the remaining life on all supplies and order new ones
● View and change the size and type of paper loaded in each tray
● View and change the product default...

Settings tab
This tab allows you to configure the product from your computer. If this product is networked, consult
with the network administrator before changing settings on this tab.
Networking tab
This tab allows the network administrator to control  network-related settings for the product when it is
connected to an IP-based network.
Links
Links are located in the upper-right part of the Status pages. You must have Internet access in order to
use any of these links. If you use a dial-up connecti on...